Edit File - File Manager

Edit File: sqlite3.h

/*
** 2001 September 15
**
** The author disclaims copyright to this source code. In place of
** a legal notice, here is a blessing:
**
** May you do good and not evil.
** May you find forgiveness for yourself and forgive others.
** May you share freely, never taking more than you give.
**
*************************************************************************
** This header file defines the interface that the SQLite library
** presents to client programs. If a C-function, structure, datatype,
** or constant definition does not appear in this file, then it is
** not a published API of SQLite, is subject to change without
** notice, and should not be referenced by programs that use SQLite.
**
** Some of the definitions that are in this file are marked as
** "experimental". Experimental interfaces are normally new
** features recently added to SQLite. We do not anticipate changes
** to experimental interfaces but reserve the right to make minor changes
** if experience from use "in the wild" suggest such changes are prudent.
**
** The official C-language API documentation for SQLite is derived
** from comments in this file. This file is the authoritative source
** on how SQLite interfaces are suppose to operate.
**
** The name of this file under configuration management is "sqlite.h.in".
** The makefile makes some minor changes to this file (such as inserting
** the version number) and changes its name to "sqlite3.h" as
** part of the build process.
*/
#ifndef _SQLITE3_H_
#define _SQLITE3_H_
#include <stdarg.h> /* Needed for the definition of va_list */

/*
** Make sure we can call this stuff from C++.
*/
#ifdef __cplusplus
extern "C" {
#endif

/*
** Provide the ability to override linkage features of the interface.
*/
#ifndef SQLITE_EXTERN
# define SQLITE_EXTERN extern
#endif
#ifndef SQLITE_API
# define SQLITE_API
#endif
#ifndef SQLITE_CDECL
# define SQLITE_CDECL
#endif
#ifndef SQLITE_STDCALL
# define SQLITE_STDCALL
#endif

/*
** These no-op macros are used in front of interfaces to mark those
** interfaces as either deprecated or experimental.  New applications
** should not use deprecated interfaces - they are supported for backwards
** compatibility only.  Application writers should be aware that
** experimental interfaces are subject to change in point releases.
**
** These macros used to resolve to various kinds of compiler magic that
** would generate warning messages when they were used.  But that
** compiler magic ended up generating such a flurry of bug reports
** that we have taken it all out and gone back to using simple
** noop macros.
*/
#define SQLITE_DEPRECATED
#define SQLITE_EXPERIMENTAL

/*
** Ensure these symbols were not defined by some previous header file.
*/
#ifdef SQLITE_VERSION
# undef SQLITE_VERSION
#endif
#ifdef SQLITE_VERSION_NUMBER
# undef SQLITE_VERSION_NUMBER
#endif

/*
** CAPI3REF: Compile-Time Library Version Numbers
**
** ^(The [SQLITE_VERSION] C preprocessor macro in the sqlite3.h header
** evaluates to a string literal that is the SQLite version in the
** format "X.Y.Z" where X is the major version number (always 3 for
** SQLite3) and Y is the minor version number and Z is the release number.)^
** ^(The [SQLITE_VERSION_NUMBER] C preprocessor macro resolves to an integer
** with the value (X*1000000 + Y*1000 + Z) where X, Y, and Z are the same
** numbers used in [SQLITE_VERSION].)^
** The SQLITE_VERSION_NUMBER for any given release of SQLite will also
** be larger than the release from which it is derived. Either Y will
** be held constant and Z will be incremented or else Y will be incremented
** and Z will be reset to zero.
**
** Since version 3.6.18, SQLite source code has been stored in the
** <a href="http://www.fossil-scm.org/">Fossil configuration management
** system</a>. ^The SQLITE_SOURCE_ID macro evaluates to
** a string which identifies a particular check-in of SQLite
** within its configuration management system. ^The SQLITE_SOURCE_ID
** string contains the date and time of the check-in (UTC) and an SHA1
** hash of the entire source tree.
**
** See also: [sqlite3_libversion()],
** [sqlite3_libversion_number()], [sqlite3_sourceid()],
** [sqlite_version()] and [sqlite_source_id()].
*/
#define SQLITE_VERSION "3.8.10.2"
#define SQLITE_VERSION_NUMBER 3008010
#define SQLITE_SOURCE_ID "2015-05-20 18:17:19 2ef4f3a5b1d1d0c4338f8243d40a2452cc1f7fe4"

/*
** CAPI3REF: Run-Time Library Version Numbers
** KEYWORDS: sqlite3_version, sqlite3_sourceid
**
** These interfaces provide the same information as the [SQLITE_VERSION],
** [SQLITE_VERSION_NUMBER], and [SQLITE_SOURCE_ID] C preprocessor macros
** but are associated with the library instead of the header file. ^(Cautious
** programmers might include assert() statements in their application to
** verify that values returned by these interfaces match the macros in
** the header, and thus insure that the application is
** compiled with matching library and header files.
**
** <blockquote><pre>
** assert( sqlite3_libversion_number()==SQLITE_VERSION_NUMBER );
** assert( strcmp(sqlite3_sourceid(),SQLITE_SOURCE_ID)==0 );
** assert( strcmp(sqlite3_libversion(),SQLITE_VERSION)==0 );
** </pre></blockquote>)^
**
** ^The sqlite3_version[] string constant contains the text of [SQLITE_VERSION]
** macro. ^The sqlite3_libversion() function returns a pointer to the
** to the sqlite3_version[] string constant. The sqlite3_libversion()
** function is provided for use in DLLs since DLL users usually do not have
** direct access to string constants within the DLL. ^The
** sqlite3_libversion_number() function returns an integer equal to
** [SQLITE_VERSION_NUMBER]. ^The sqlite3_sourceid() function returns 
** a pointer to a string constant whose value is the same as the 
** [SQLITE_SOURCE_ID] C preprocessor macro.
**
** See also: [sqlite_version()] and [sqlite_source_id()].
*/
SQLITE_API SQLITE_EXTERN const char sqlite3_version[];
SQLITE_API const char *SQLITE_STDCALL sqlite3_libversion(void);
SQLITE_API const char *SQLITE_STDCALL sqlite3_sourceid(void);
SQLITE_API int SQLITE_STDCALL sqlite3_libversion_number(void);

/*
** CAPI3REF: Run-Time Library Compilation Options Diagnostics
**
** ^The sqlite3_compileoption_used() function returns 0 or 1 
** indicating whether the specified option was defined at 
** compile time.  ^The SQLITE_ prefix may be omitted from the 
** option name passed to sqlite3_compileoption_used().  
**
** ^The sqlite3_compileoption_get() function allows iterating
** over the list of options that were defined at compile time by
** returning the N-th compile time option string.  ^If N is out of range,
** sqlite3_compileoption_get() returns a NULL pointer.  ^The SQLITE_ 
** prefix is omitted from any strings returned by 
** sqlite3_compileoption_get().
**
** ^Support for the diagnostic functions sqlite3_compileoption_used()
** and sqlite3_compileoption_get() may be omitted by specifying the 
** [SQLITE_OMIT_COMPILEOPTION_DIAGS] option at compile time.
**
** See also: SQL functions [sqlite_compileoption_used()] and
** [sqlite_compileoption_get()] and the [compile_options pragma].
*/
#ifndef SQLITE_OMIT_COMPILEOPTION_DIAGS
SQLITE_API int SQLITE_STDCALL sqlite3_compileoption_used(const char *zOptName);
SQLITE_API const char *SQLITE_STDCALL sqlite3_compileoption_get(int N);
#endif

/*
** CAPI3REF: Test To See If The Library Is Threadsafe
**
** ^The sqlite3_threadsafe() function returns zero if and only if
** SQLite was compiled with mutexing code omitted due to the
** [SQLITE_THREADSAFE] compile-time option being set to 0.
**
** SQLite can be compiled with or without mutexes.  When
** the [SQLITE_THREADSAFE] C preprocessor macro is 1 or 2, mutexes
** are enabled and SQLite is threadsafe.  When the
** [SQLITE_THREADSAFE] macro is 0, 
** the mutexes are omitted.  Without the mutexes, it is not safe
** to use SQLite concurrently from more than one thread.
**
** Enabling mutexes incurs a measurable performance penalty.
** So if speed is of utmost importance, it makes sense to disable
** the mutexes.  But for maximum safety, mutexes should be enabled.
** ^The default behavior is for mutexes to be enabled.
**
** This interface can be used by an application to make sure that the
** version of SQLite that it is linking against was compiled with
** the desired setting of the [SQLITE_THREADSAFE] macro.
**
** This interface only reports on the compile-time mutex setting
** of the [SQLITE_THREADSAFE] flag.  If SQLite is compiled with
** SQLITE_THREADSAFE=1 or =2 then mutexes are enabled by default but
** can be fully or partially disabled using a call to [sqlite3_config()]
** with the verbs [SQLITE_CONFIG_SINGLETHREAD], [SQLITE_CONFIG_MULTITHREAD],
** or [SQLITE_CONFIG_SERIALIZED].  ^(The return value of the
** sqlite3_threadsafe() function shows only the compile-time setting of
** thread safety, not any run-time changes to that setting made by
** sqlite3_config(). In other words, the return value from sqlite3_threadsafe()
** is unchanged by calls to sqlite3_config().)^
**
** See the [threading mode] documentation for additional information.
*/
SQLITE_API int SQLITE_STDCALL sqlite3_threadsafe(void);

/*
** CAPI3REF: Database Connection Handle
** KEYWORDS: {database connection} {database connections}
**
** Each open SQLite database is represented by a pointer to an instance of
** the opaque structure named "sqlite3".  It is useful to think of an sqlite3
** pointer as an object.  The [sqlite3_open()], [sqlite3_open16()], and
** [sqlite3_open_v2()] interfaces are its constructors, and [sqlite3_close()]
** and [sqlite3_close_v2()] are its destructors.  There are many other
** interfaces (such as
** [sqlite3_prepare_v2()], [sqlite3_create_function()], and
** [sqlite3_busy_timeout()] to name but three) that are methods on an
** sqlite3 object.
*/
typedef struct sqlite3 sqlite3;

/*
** CAPI3REF: 64-Bit Integer Types
** KEYWORDS: sqlite_int64 sqlite_uint64
**
** Because there is no cross-platform way to specify 64-bit integer types
** SQLite includes typedefs for 64-bit signed and unsigned integers.
**
** The sqlite3_int64 and sqlite3_uint64 are the preferred type definitions.
** The sqlite_int64 and sqlite_uint64 types are supported for backwards
** compatibility only.
**
** ^The sqlite3_int64 and sqlite_int64 types can store integer values
** between -9223372036854775808 and +9223372036854775807 inclusive.  ^The
** sqlite3_uint64 and sqlite_uint64 types can store integer values 
** between 0 and +18446744073709551615 inclusive.
*/
#ifdef SQLITE_INT64_TYPE
  typedef SQLITE_INT64_TYPE sqlite_int64;
  typedef unsigned SQLITE_INT64_TYPE sqlite_uint64;
#elif defined(_MSC_VER) || defined(__BORLANDC__)
  typedef __int64 sqlite_int64;
  typedef unsigned __int64 sqlite_uint64;
#else
  typedef long long int sqlite_int64;
  typedef unsigned long long int sqlite_uint64;
#endif
typedef sqlite_int64 sqlite3_int64;
typedef sqlite_uint64 sqlite3_uint64;

/*
** If compiling for a processor that lacks floating point support,
** substitute integer for floating-point.
*/
#ifdef SQLITE_OMIT_FLOATING_POINT
# define double sqlite3_int64
#endif

/*
** CAPI3REF: Closing A Database Connection
** DESTRUCTOR: sqlite3
**
** ^The sqlite3_close() and sqlite3_close_v2() routines are destructors
** for the [sqlite3] object.
** ^Calls to sqlite3_close() and sqlite3_close_v2() return [SQLITE_OK] if
** the [sqlite3] object is successfully destroyed and all associated
** resources are deallocated.
**
** ^If the database connection is associated with unfinalized prepared
** statements or unfinished sqlite3_backup objects then sqlite3_close()
** will leave the database connection open and return [SQLITE_BUSY].
** ^If sqlite3_close_v2() is called with unfinalized prepared statements
** and/or unfinished sqlite3_backups, then the database connection becomes
** an unusable "zombie" which will automatically be deallocated when the
** last prepared statement is finalized or the last sqlite3_backup is
** finished.  The sqlite3_close_v2() interface is intended for use with
** host languages that are garbage collected, and where the order in which
** destructors are called is arbitrary.
**
** Applications should [sqlite3_finalize | finalize] all [prepared statements],
** [sqlite3_blob_close | close] all [BLOB handles], and 
** [sqlite3_backup_finish | finish] all [sqlite3_backup] objects associated
** with the [sqlite3] object prior to attempting to close the object.  ^If
** sqlite3_close_v2() is called on a [database connection] that still has
** outstanding [prepared statements], [BLOB handles], and/or
** [sqlite3_backup] objects then it returns [SQLITE_OK] and the deallocation
** of resources is deferred until all [prepared statements], [BLOB handles],
** and [sqlite3_backup] objects are also destroyed.
**
** ^If an [sqlite3] object is destroyed while a transaction is open,
** the transaction is automatically rolled back.
**
** The C parameter to [sqlite3_close(C)] and [sqlite3_close_v2(C)]
** must be either a NULL
** pointer or an [sqlite3] object pointer obtained
** from [sqlite3_open()], [sqlite3_open16()], or
** [sqlite3_open_v2()], and not previously closed.
** ^Calling sqlite3_close() or sqlite3_close_v2() with a NULL pointer
** argument is a harmless no-op.
*/
SQLITE_API int SQLITE_STDCALL sqlite3_close(sqlite3*);
SQLITE_API int SQLITE_STDCALL sqlite3_close_v2(sqlite3*);

/*
** The type for a callback function.
** This is legacy and deprecated.  It is included for historical
** compatibility and is not documented.
*/
typedef int (*sqlite3_callback)(void*,int,char**, char**);

/*
** CAPI3REF: One-Step Query Execution Interface
** METHOD: sqlite3
**
** The sqlite3_exec() interface is a convenience wrapper around
** [sqlite3_prepare_v2()], [sqlite3_step()], and [sqlite3_finalize()],
** that allows an application to run multiple statements of SQL
** without having to use a lot of C code. 
**
** ^The sqlite3_exec() interface runs zero or more UTF-8 encoded,
** semicolon-separate SQL statements passed into its 2nd argument,
** in the context of the [database connection] passed in as its 1st
** argument. ^If the callback function of the 3rd argument to
** sqlite3_exec() is not NULL, then it is invoked for each result row
** coming out of the evaluated SQL statements. ^The 4th argument to
** sqlite3_exec() is relayed through to the 1st argument of each
** callback invocation. ^If the callback pointer to sqlite3_exec()
** is NULL, then no callback is ever invoked and result rows are
** ignored.
**
** ^If an error occurs while evaluating the SQL statements passed into
** sqlite3_exec(), then execution of the current statement stops and
** subsequent statements are skipped. ^If the 5th parameter to sqlite3_exec()
** is not NULL then any error message is written into memory obtained
** from [sqlite3_malloc()] and passed back through the 5th parameter.
** To avoid memory leaks, the application should invoke [sqlite3_free()]
** on error message strings returned through the 5th parameter of
** of sqlite3_exec() after the error message string is no longer needed.
** ^If the 5th parameter to sqlite3_exec() is not NULL and no errors
** occur, then sqlite3_exec() sets the pointer in its 5th parameter to
** NULL before returning.
**
** ^If an sqlite3_exec() callback returns non-zero, the sqlite3_exec()
** routine returns SQLITE_ABORT without invoking the callback again and
** without running any subsequent SQL statements.
**
** ^The 2nd argument to the sqlite3_exec() callback function is the
** number of columns in the result. ^The 3rd argument to the sqlite3_exec()
** callback is an array of pointers to strings obtained as if from
** [sqlite3_column_text()], one for each column. ^If an element of a
** result row is NULL then the corresponding string pointer for the
** sqlite3_exec() callback is a NULL pointer. ^The 4th argument to the
** sqlite3_exec() callback is an array of pointers to strings where each
** entry represents the name of corresponding result column as obtained
** from [sqlite3_column_name()].
**
** ^If the 2nd parameter to sqlite3_exec() is a NULL pointer, a pointer
** to an empty string, or a pointer that contains only whitespace and/or 
** SQL comments, then no SQL statements are evaluated and the database
** is not changed.
**
** Restrictions:
**
** <ul>
** <li> The application must insure that the 1st parameter to sqlite3_exec()
** is a valid and open [database connection].
** <li> The application must not close the [database connection] specified by
** the 1st parameter to sqlite3_exec() while sqlite3_exec() is running.
** <li> The application must not modify the SQL statement text passed into
** the 2nd parameter of sqlite3_exec() while sqlite3_exec() is running.
** </ul>
*/
SQLITE_API int SQLITE_STDCALL sqlite3_exec(
 sqlite3*, /* An open database */
 const char *sql, /* SQL to be evaluated */
 int (*callback)(void*,int,char**,char**), /* Callback function */
 void *, /* 1st argument to callback */
 char **errmsg /* Error msg written here */
);

/*
** CAPI3REF: Result Codes
** KEYWORDS: {result code definitions}
**
** Many SQLite functions return an integer result code from the set shown
** here in order to indicate success or failure.
**
** New error codes may be added in future versions of SQLite.
**
** See also: [extended result code definitions]
*/
#define SQLITE_OK           0   /* Successful result */
/* beginning-of-error-codes */
#define SQLITE_ERROR        1   /* SQL error or missing database */
#define SQLITE_INTERNAL     2   /* Internal logic error in SQLite */
#define SQLITE_PERM         3   /* Access permission denied */
#define SQLITE_ABORT        4   /* Callback routine requested an abort */
#define SQLITE_BUSY         5   /* The database file is locked */
#define SQLITE_LOCKED       6   /* A table in the database is locked */
#define SQLITE_NOMEM        7   /* A malloc() failed */
#define SQLITE_READONLY     8   /* Attempt to write a readonly database */
#define SQLITE_INTERRUPT    9   /* Operation terminated by sqlite3_interrupt()*/
#define SQLITE_IOERR       10   /* Some kind of disk I/O error occurred */
#define SQLITE_CORRUPT     11   /* The database disk image is malformed */
#define SQLITE_NOTFOUND    12   /* Unknown opcode in sqlite3_file_control() */
#define SQLITE_FULL        13   /* Insertion failed because database is full */
#define SQLITE_CANTOPEN    14   /* Unable to open the database file */
#define SQLITE_PROTOCOL    15   /* Database lock protocol error */
#define SQLITE_EMPTY       16   /* Database is empty */
#define SQLITE_SCHEMA      17   /* The database schema changed */
#define SQLITE_TOOBIG      18   /* String or BLOB exceeds size limit */
#define SQLITE_CONSTRAINT  19   /* Abort due to constraint violation */
#define SQLITE_MISMATCH    20   /* Data type mismatch */
#define SQLITE_MISUSE      21   /* Library used incorrectly */
#define SQLITE_NOLFS       22   /* Uses OS features not supported on host */
#define SQLITE_AUTH        23   /* Authorization denied */
#define SQLITE_FORMAT      24   /* Auxiliary database format error */
#define SQLITE_RANGE       25   /* 2nd parameter to sqlite3_bind out of range */
#define SQLITE_NOTADB      26   /* File opened that is not a database file */
#define SQLITE_NOTICE      27   /* Notifications from sqlite3_log() */
#define SQLITE_WARNING     28   /* Warnings from sqlite3_log() */
#define SQLITE_ROW         100  /* sqlite3_step() has another row ready */
#define SQLITE_DONE        101  /* sqlite3_step() has finished executing */
/* end-of-error-codes */

/*
** CAPI3REF: Extended Result Codes
** KEYWORDS: {extended result code definitions}
**
** In its default configuration, SQLite API routines return one of 30 integer
** [result codes]. However, experience has shown that many of
** these result codes are too coarse-grained. They do not provide as
** much information about problems as programmers might like. In an effort to
** address this, newer versions of SQLite (version 3.3.8 and later) include
** support for additional result codes that provide more detailed information
** about errors. These [extended result codes] are enabled or disabled
** on a per database connection basis using the
** [sqlite3_extended_result_codes()] API. Or, the extended code for
** the most recent error can be obtained using
** [sqlite3_extended_errcode()].
*/
#define SQLITE_IOERR_READ (SQLITE_IOERR | (1<<8))
#define SQLITE_IOERR_SHORT_READ (SQLITE_IOERR | (2<<8))
#define SQLITE_IOERR_WRITE (SQLITE_IOERR | (3<<8))
#define SQLITE_IOERR_FSYNC (SQLITE_IOERR | (4<<8))
#define SQLITE_IOERR_DIR_FSYNC (SQLITE_IOERR | (5<<8))
#define SQLITE_IOERR_TRUNCATE (SQLITE_IOERR | (6<<8))
#define SQLITE_IOERR_FSTAT (SQLITE_IOERR | (7<<8))
#define SQLITE_IOERR_UNLOCK (SQLITE_IOERR | (8<<8))
#define SQLITE_IOERR_RDLOCK (SQLITE_IOERR | (9<<8))
#define SQLITE_IOERR_DELETE (SQLITE_IOERR | (10<<8))
#define SQLITE_IOERR_BLOCKED (SQLITE_IOERR | (11<<8))
#define SQLITE_IOERR_NOMEM (SQLITE_IOERR | (12<<8))
#define SQLITE_IOERR_ACCESS (SQLITE_IOERR | (13<<8))
#define SQLITE_IOERR_CHECKRESERVEDLOCK (SQLITE_IOERR | (14<<8))
#define SQLITE_IOERR_LOCK (SQLITE_IOERR | (15<<8))
#define SQLITE_IOERR_CLOSE (SQLITE_IOERR | (16<<8))
#define SQLITE_IOERR_DIR_CLOSE (SQLITE_IOERR | (17<<8))
#define SQLITE_IOERR_SHMOPEN (SQLITE_IOERR | (18<<8))
#define SQLITE_IOERR_SHMSIZE (SQLITE_IOERR | (19<<8))
#define SQLITE_IOERR_SHMLOCK (SQLITE_IOERR | (20<<8))
#define SQLITE_IOERR_SHMMAP (SQLITE_IOERR | (21<<8))
#define SQLITE_IOERR_SEEK (SQLITE_IOERR | (22<<8))
#define SQLITE_IOERR_DELETE_NOENT (SQLITE_IOERR | (23<<8))
#define SQLITE_IOERR_MMAP (SQLITE_IOERR | (24<<8))
#define SQLITE_IOERR_GETTEMPPATH (SQLITE_IOERR | (25<<8))
#define SQLITE_IOERR_CONVPATH (SQLITE_IOERR | (26<<8))
#define SQLITE_LOCKED_SHAREDCACHE (SQLITE_LOCKED | (1<<8))
#define SQLITE_BUSY_RECOVERY (SQLITE_BUSY | (1<<8))
#define SQLITE_BUSY_SNAPSHOT (SQLITE_BUSY | (2<<8))
#define SQLITE_CANTOPEN_NOTEMPDIR (SQLITE_CANTOPEN | (1<<8))
#define SQLITE_CANTOPEN_ISDIR (SQLITE_CANTOPEN | (2<<8))
#define SQLITE_CANTOPEN_FULLPATH (SQLITE_CANTOPEN | (3<<8))
#define SQLITE_CANTOPEN_CONVPATH (SQLITE_CANTOPEN | (4<<8))
#define SQLITE_CORRUPT_VTAB (SQLITE_CORRUPT | (1<<8))
#define SQLITE_READONLY_RECOVERY (SQLITE_READONLY | (1<<8))
#define SQLITE_READONLY_CANTLOCK (SQLITE_READONLY | (2<<8))
#define SQLITE_READONLY_ROLLBACK (SQLITE_READONLY | (3<<8))
#define SQLITE_READONLY_DBMOVED (SQLITE_READONLY | (4<<8))
#define SQLITE_ABORT_ROLLBACK (SQLITE_ABORT | (2<<8))
#define SQLITE_CONSTRAINT_CHECK (SQLITE_CONSTRAINT | (1<<8))
#define SQLITE_CONSTRAINT_COMMITHOOK (SQLITE_CONSTRAINT | (2<<8))
#define SQLITE_CONSTRAINT_FOREIGNKEY (SQLITE_CONSTRAINT | (3<<8))
#define SQLITE_CONSTRAINT_FUNCTION (SQLITE_CONSTRAINT | (4<<8))
#define SQLITE_CONSTRAINT_NOTNULL (SQLITE_CONSTRAINT | (5<<8))
#define SQLITE_CONSTRAINT_PRIMARYKEY (SQLITE_CONSTRAINT | (6<<8))
#define SQLITE_CONSTRAINT_TRIGGER (SQLITE_CONSTRAINT | (7<<8))
#define SQLITE_CONSTRAINT_UNIQUE (SQLITE_CONSTRAINT | (8<<8))
#define SQLITE_CONSTRAINT_VTAB (SQLITE_CONSTRAINT | (9<<8))
#define SQLITE_CONSTRAINT_ROWID (SQLITE_CONSTRAINT |(10<<8))
#define SQLITE_NOTICE_RECOVER_WAL (SQLITE_NOTICE | (1<<8))
#define SQLITE_NOTICE_RECOVER_ROLLBACK (SQLITE_NOTICE | (2<<8))
#define SQLITE_WARNING_AUTOINDEX (SQLITE_WARNING | (1<<8))
#define SQLITE_AUTH_USER (SQLITE_AUTH | (1<<8))

/*
** CAPI3REF: Flags For File Open Operations
**
** These bit values are intended for use in the
** 3rd parameter to the [sqlite3_open_v2()] interface and
** in the 4th parameter to the [sqlite3_vfs.xOpen] method.
*/
#define SQLITE_OPEN_READONLY         0x00000001  /* Ok for sqlite3_open_v2() */
#define SQLITE_OPEN_READWRITE        0x00000002  /* Ok for sqlite3_open_v2() */
#define SQLITE_OPEN_CREATE           0x00000004  /* Ok for sqlite3_open_v2() */
#define SQLITE_OPEN_DELETEONCLOSE    0x00000008  /* VFS only */
#define SQLITE_OPEN_EXCLUSIVE        0x00000010  /* VFS only */
#define SQLITE_OPEN_AUTOPROXY        0x00000020  /* VFS only */
#define SQLITE_OPEN_URI              0x00000040  /* Ok for sqlite3_open_v2() */
#define SQLITE_OPEN_MEMORY           0x00000080  /* Ok for sqlite3_open_v2() */
#define SQLITE_OPEN_MAIN_DB          0x00000100  /* VFS only */
#define SQLITE_OPEN_TEMP_DB          0x00000200  /* VFS only */
#define SQLITE_OPEN_TRANSIENT_DB     0x00000400  /* VFS only */
#define SQLITE_OPEN_MAIN_JOURNAL     0x00000800  /* VFS only */
#define SQLITE_OPEN_TEMP_JOURNAL     0x00001000  /* VFS only */
#define SQLITE_OPEN_SUBJOURNAL       0x00002000  /* VFS only */
#define SQLITE_OPEN_MASTER_JOURNAL   0x00004000  /* VFS only */
#define SQLITE_OPEN_NOMUTEX          0x00008000  /* Ok for sqlite3_open_v2() */
#define SQLITE_OPEN_FULLMUTEX        0x00010000  /* Ok for sqlite3_open_v2() */
#define SQLITE_OPEN_SHAREDCACHE      0x00020000  /* Ok for sqlite3_open_v2() */
#define SQLITE_OPEN_PRIVATECACHE     0x00040000  /* Ok for sqlite3_open_v2() */
#define SQLITE_OPEN_WAL              0x00080000  /* VFS only */

/* Reserved:                         0x00F00000 */

/*
** CAPI3REF: Device Characteristics
**
** The xDeviceCharacteristics method of the [sqlite3_io_methods]
** object returns an integer which is a vector of these
** bit values expressing I/O characteristics of the mass storage
** device that holds the file that the [sqlite3_io_methods]
** refers to.
**
** The SQLITE_IOCAP_ATOMIC property means that all writes of
** any size are atomic.  The SQLITE_IOCAP_ATOMICnnn values
** mean that writes of blocks that are nnn bytes in size and
** are aligned to an address which is an integer multiple of
** nnn are atomic.  The SQLITE_IOCAP_SAFE_APPEND value means
** that when data is appended to a file, the data is appended
** first then the size of the file is extended, never the other
** way around.  The SQLITE_IOCAP_SEQUENTIAL property means that
** information is written to disk in the same order as calls
** to xWrite().  The SQLITE_IOCAP_POWERSAFE_OVERWRITE property means that
** after reboot following a crash or power loss, the only bytes in a
** file that were written at the application level might have changed
** and that adjacent bytes, even bytes within the same sector are
** guaranteed to be unchanged.  The SQLITE_IOCAP_UNDELETABLE_WHEN_OPEN
** flag indicate that a file cannot be deleted when open.  The
** SQLITE_IOCAP_IMMUTABLE flag indicates that the file is on
** read-only media and cannot be changed even by processes with
** elevated privileges.
*/
#define SQLITE_IOCAP_ATOMIC                 0x00000001
#define SQLITE_IOCAP_ATOMIC512              0x00000002
#define SQLITE_IOCAP_ATOMIC1K               0x00000004
#define SQLITE_IOCAP_ATOMIC2K               0x00000008
#define SQLITE_IOCAP_ATOMIC4K               0x00000010
#define SQLITE_IOCAP_ATOMIC8K               0x00000020
#define SQLITE_IOCAP_ATOMIC16K              0x00000040
#define SQLITE_IOCAP_ATOMIC32K              0x00000080
#define SQLITE_IOCAP_ATOMIC64K              0x00000100
#define SQLITE_IOCAP_SAFE_APPEND            0x00000200
#define SQLITE_IOCAP_SEQUENTIAL             0x00000400
#define SQLITE_IOCAP_UNDELETABLE_WHEN_OPEN  0x00000800
#define SQLITE_IOCAP_POWERSAFE_OVERWRITE    0x00001000
#define SQLITE_IOCAP_IMMUTABLE              0x00002000

/*
** CAPI3REF: File Locking Levels
**
** SQLite uses one of these integer values as the second
** argument to calls it makes to the xLock() and xUnlock() methods
** of an [sqlite3_io_methods] object.
*/
#define SQLITE_LOCK_NONE          0
#define SQLITE_LOCK_SHARED        1
#define SQLITE_LOCK_RESERVED      2
#define SQLITE_LOCK_PENDING       3
#define SQLITE_LOCK_EXCLUSIVE     4

/*
** CAPI3REF: Synchronization Type Flags
**
** When SQLite invokes the xSync() method of an
** [sqlite3_io_methods] object it uses a combination of
** these integer values as the second argument.
**
** When the SQLITE_SYNC_DATAONLY flag is used, it means that the
** sync operation only needs to flush data to mass storage.  Inode
** information need not be flushed. If the lower four bits of the flag
** equal SQLITE_SYNC_NORMAL, that means to use normal fsync() semantics.
** If the lower four bits equal SQLITE_SYNC_FULL, that means
** to use Mac OS X style fullsync instead of fsync().
**
** Do not confuse the SQLITE_SYNC_NORMAL and SQLITE_SYNC_FULL flags
** with the [PRAGMA synchronous]=NORMAL and [PRAGMA synchronous]=FULL
** settings.  The [synchronous pragma] determines when calls to the
** xSync VFS method occur and applies uniformly across all platforms.
** The SQLITE_SYNC_NORMAL and SQLITE_SYNC_FULL flags determine how
** energetic or rigorous or forceful the sync operations are and
** only make a difference on Mac OSX for the default SQLite code.
** (Third-party VFS implementations might also make the distinction
** between SQLITE_SYNC_NORMAL and SQLITE_SYNC_FULL, but among the
** operating systems natively supported by SQLite, only Mac OSX
** cares about the difference.)
*/
#define SQLITE_SYNC_NORMAL        0x00002
#define SQLITE_SYNC_FULL          0x00003
#define SQLITE_SYNC_DATAONLY      0x00010

/*
** CAPI3REF: OS Interface Open File Handle
**
** An [sqlite3_file] object represents an open file in the 
** [sqlite3_vfs | OS interface layer].  Individual OS interface
** implementations will
** want to subclass this object by appending additional fields
** for their own use.  The pMethods entry is a pointer to an
** [sqlite3_io_methods] object that defines methods for performing
** I/O operations on the open file.
*/
typedef struct sqlite3_file sqlite3_file;
struct sqlite3_file {
  const struct sqlite3_io_methods *pMethods;  /* Methods for an open file */
};

/*
** CAPI3REF: OS Interface File Virtual Methods Object
**
** Every file opened by the [sqlite3_vfs.xOpen] method populates an
** [sqlite3_file] object (or, more commonly, a subclass of the
** [sqlite3_file] object) with a pointer to an instance of this object.
** This object defines the methods used to perform various operations
** against the open file represented by the [sqlite3_file] object.
**
** If the [sqlite3_vfs.xOpen] method sets the sqlite3_file.pMethods element 
** to a non-NULL pointer, then the sqlite3_io_methods.xClose method
** may be invoked even if the [sqlite3_vfs.xOpen] reported that it failed. The
** only way to prevent a call to xClose following a failed [sqlite3_vfs.xOpen]
** is for the [sqlite3_vfs.xOpen] to set the sqlite3_file.pMethods element
** to NULL.
**
** The flags argument to xSync may be one of [SQLITE_SYNC_NORMAL] or
** [SQLITE_SYNC_FULL]. The first choice is the normal fsync().
** The second choice is a Mac OS X style fullsync. The [SQLITE_SYNC_DATAONLY]
** flag may be ORed in to indicate that only the data of the file
** and not its inode needs to be synced.
**
** The integer values to xLock() and xUnlock() are one of
** <ul>
** <li> [SQLITE_LOCK_NONE],
** <li> [SQLITE_LOCK_SHARED],
** <li> [SQLITE_LOCK_RESERVED],
** <li> [SQLITE_LOCK_PENDING], or
** <li> [SQLITE_LOCK_EXCLUSIVE].
** </ul>
** xLock() increases the lock. xUnlock() decreases the lock.
** The xCheckReservedLock() method checks whether any database connection,
** either in this process or in some other process, is holding a RESERVED,
** PENDING, or EXCLUSIVE lock on the file. It returns true
** if such a lock exists and false otherwise.
**
** The xFileControl() method is a generic interface that allows custom
** VFS implementations to directly control an open file using the
** [sqlite3_file_control()] interface. The second "op" argument is an
** integer opcode. The third argument is a generic pointer intended to
** point to a structure that may contain arguments or space in which to
** write return values. Potential uses for xFileControl() might be
** functions to enable blocking locks with timeouts, to change the
** locking strategy (for example to use dot-file locks), to inquire
** about the status of a lock, or to break stale locks. The SQLite
** core reserves all opcodes less than 100 for its own use.
** A [file control opcodes | list of opcodes] less than 100 is available.
** Applications that define a custom xFileControl method should use opcodes
** greater than 100 to avoid conflicts. VFS implementations should
** return [SQLITE_NOTFOUND] for file control opcodes that they do not
** recognize.
**
** The xSectorSize() method returns the sector size of the
** device that underlies the file. The sector size is the
** minimum write that can be performed without disturbing
** other bytes in the file. The xDeviceCharacteristics()
** method returns a bit vector describing behaviors of the
** underlying device:
**
** <ul>
** <li> [SQLITE_IOCAP_ATOMIC]
** <li> [SQLITE_IOCAP_ATOMIC512]
** <li> [SQLITE_IOCAP_ATOMIC1K]
** <li> [SQLITE_IOCAP_ATOMIC2K]
** <li> [SQLITE_IOCAP_ATOMIC4K]
** <li> [SQLITE_IOCAP_ATOMIC8K]
** <li> [SQLITE_IOCAP_ATOMIC16K]
** <li> [SQLITE_IOCAP_ATOMIC32K]
** <li> [SQLITE_IOCAP_ATOMIC64K]
** <li> [SQLITE_IOCAP_SAFE_APPEND]
** <li> [SQLITE_IOCAP_SEQUENTIAL]
** </ul>
**
** The SQLITE_IOCAP_ATOMIC property means that all writes of
** any size are atomic. The SQLITE_IOCAP_ATOMICnnn values
** mean that writes of blocks that are nnn bytes in size and
** are aligned to an address which is an integer multiple of
** nnn are atomic. The SQLITE_IOCAP_SAFE_APPEND value means
** that when data is appended to a file, the data is appended
** first then the size of the file is extended, never the other
** way around. The SQLITE_IOCAP_SEQUENTIAL property means that
** information is written to disk in the same order as calls
** to xWrite().
**
** If xRead() returns SQLITE_IOERR_SHORT_READ it must also fill
** in the unread portions of the buffer with zeros. A VFS that
** fails to zero-fill short reads might seem to work. However,
** failure to zero-fill short reads will eventually lead to
** database corruption.
*/
typedef struct sqlite3_io_methods sqlite3_io_methods;
struct sqlite3_io_methods {
 int iVersion;
 int (*xClose)(sqlite3_file*);
 int (*xRead)(sqlite3_file*, void*, int iAmt, sqlite3_int64 iOfst);
 int (*xWrite)(sqlite3_file*, const void*, int iAmt, sqlite3_int64 iOfst);
 int (*xTruncate)(sqlite3_file*, sqlite3_int64 size);
 int (*xSync)(sqlite3_file*, int flags);
 int (*xFileSize)(sqlite3_file*, sqlite3_int64 *pSize);
 int (*xLock)(sqlite3_file*, int);
 int (*xUnlock)(sqlite3_file*, int);
 int (*xCheckReservedLock)(sqlite3_file*, int *pResOut);
 int (*xFileControl)(sqlite3_file*, int op, void *pArg);
 int (*xSectorSize)(sqlite3_file*);
 int (*xDeviceCharacteristics)(sqlite3_file*);
 /* Methods above are valid for version 1 */
 int (*xShmMap)(sqlite3_file*, int iPg, int pgsz, int, void volatile**);
 int (*xShmLock)(sqlite3_file*, int offset, int n, int flags);
 void (*xShmBarrier)(sqlite3_file*);
 int (*xShmUnmap)(sqlite3_file*, int deleteFlag);
 /* Methods above are valid for version 2 */
 int (*xFetch)(sqlite3_file*, sqlite3_int64 iOfst, int iAmt, void **pp);
 int (*xUnfetch)(sqlite3_file*, sqlite3_int64 iOfst, void *p);
 /* Methods above are valid for version 3 */
 /* Additional methods may be added in future releases */
};

/*
** CAPI3REF: Standard File Control Opcodes
** KEYWORDS: {file control opcodes} {file control opcode}
**
** These integer constants are opcodes for the xFileControl method
** of the [sqlite3_io_methods] object and for the [sqlite3_file_control()]
** interface.
**
** <ul>
** <li>[[SQLITE_FCNTL_LOCKSTATE]]
** The [SQLITE_FCNTL_LOCKSTATE] opcode is used for debugging. This
** opcode causes the xFileControl method to write the current state of
** the lock (one of [SQLITE_LOCK_NONE], [SQLITE_LOCK_SHARED],
** [SQLITE_LOCK_RESERVED], [SQLITE_LOCK_PENDING], or [SQLITE_LOCK_EXCLUSIVE])
** into an integer that the pArg argument points to. This capability
** is used during testing and is only available when the SQLITE_TEST
** compile-time option is used.
**
** <li>[[SQLITE_FCNTL_SIZE_HINT]]
** The [SQLITE_FCNTL_SIZE_HINT] opcode is used by SQLite to give the VFS
** layer a hint of how large the database file will grow to be during the
** current transaction. This hint is not guaranteed to be accurate but it
** is often close. The underlying VFS might choose to preallocate database
** file space based on this hint in order to help writes to the database
** file run faster.
**
** <li>[[SQLITE_FCNTL_CHUNK_SIZE]]
** The [SQLITE_FCNTL_CHUNK_SIZE] opcode is used to request that the VFS
** extends and truncates the database file in chunks of a size specified
** by the user. The fourth argument to [sqlite3_file_control()] should 
** point to an integer (type int) containing the new chunk-size to use
** for the nominated database. Allocating database file space in large
** chunks (say 1MB at a time), may reduce file-system fragmentation and
** improve performance on some systems.
**
** <li>[[SQLITE_FCNTL_FILE_POINTER]]
** The [SQLITE_FCNTL_FILE_POINTER] opcode is used to obtain a pointer
** to the [sqlite3_file] object associated with a particular database
** connection. See the [sqlite3_file_control()] documentation for
** additional information.
**
** <li>[[SQLITE_FCNTL_SYNC_OMITTED]]
** No longer in use.
**
** <li>[[SQLITE_FCNTL_SYNC]]
** The [SQLITE_FCNTL_SYNC] opcode is generated internally by SQLite and
** sent to the VFS immediately before the xSync method is invoked on a
** database file descriptor. Or, if the xSync method is not invoked 
** because the user has configured SQLite with 
** [PRAGMA synchronous | PRAGMA synchronous=OFF] it is invoked in place 
** of the xSync method. In most cases, the pointer argument passed with
** this file-control is NULL. However, if the database file is being synced
** as part of a multi-database commit, the argument points to a nul-terminated
** string containing the transactions master-journal file name. VFSes that 
** do not need this signal should silently ignore this opcode. Applications 
** should not call [sqlite3_file_control()] with this opcode as doing so may 
** disrupt the operation of the specialized VFSes that do require it. 
**
** <li>[[SQLITE_FCNTL_COMMIT_PHASETWO]]
** The [SQLITE_FCNTL_COMMIT_PHASETWO] opcode is generated internally by SQLite
** and sent to the VFS after a transaction has been committed immediately
** but before the database is unlocked. VFSes that do not need this signal
** should silently ignore this opcode. Applications should not call
** [sqlite3_file_control()] with this opcode as doing so may disrupt the 
** operation of the specialized VFSes that do require it. 
**
** <li>[[SQLITE_FCNTL_WIN32_AV_RETRY]]
** ^The [SQLITE_FCNTL_WIN32_AV_RETRY] opcode is used to configure automatic
** retry counts and intervals for certain disk I/O operations for the
** windows [VFS] in order to provide robustness in the presence of
** anti-virus programs. By default, the windows VFS will retry file read,
** file write, and file delete operations up to 10 times, with a delay
** of 25 milliseconds before the first retry and with the delay increasing
** by an additional 25 milliseconds with each subsequent retry. This
** opcode allows these two values (10 retries and 25 milliseconds of delay)
** to be adjusted. The values are changed for all database connections
** within the same process. The argument is a pointer to an array of two
** integers where the first integer i the new retry count and the second
** integer is the delay. If either integer is negative, then the setting
** is not changed but instead the prior value of that setting is written
** into the array entry, allowing the current retry settings to be
** interrogated. The zDbName parameter is ignored.
**
** <li>[[SQLITE_FCNTL_PERSIST_WAL]]
** ^The [SQLITE_FCNTL_PERSIST_WAL] opcode is used to set or query the
** persistent [WAL | Write Ahead Log] setting. By default, the auxiliary
** write ahead log and shared memory files used for transaction control
** are automatically deleted when the latest connection to the database
** closes. Setting persistent WAL mode causes those files to persist after
** close. Persisting the files is useful when other processes that do not
** have write permission on the directory containing the database file want
** to read the database file, as the WAL and shared memory files must exist
** in order for the database to be readable. The fourth parameter to
** [sqlite3_file_control()] for this opcode should be a pointer to an integer.
** That integer is 0 to disable persistent WAL mode or 1 to enable persistent
** WAL mode. If the integer is -1, then it is overwritten with the current
** WAL persistence setting.
**
** <li>[[SQLITE_FCNTL_POWERSAFE_OVERWRITE]]
** ^The [SQLITE_FCNTL_POWERSAFE_OVERWRITE] opcode is used to set or query the
** persistent "powersafe-overwrite" or "PSOW" setting. The PSOW setting
** determines the [SQLITE_IOCAP_POWERSAFE_OVERWRITE] bit of the
** xDeviceCharacteristics methods. The fourth parameter to
** [sqlite3_file_control()] for this opcode should be a pointer to an integer.
** That integer is 0 to disable zero-damage mode or 1 to enable zero-damage
** mode. If the integer is -1, then it is overwritten with the current
** zero-damage mode setting.
**
** <li>[[SQLITE_FCNTL_OVERWRITE]]
** ^The [SQLITE_FCNTL_OVERWRITE] opcode is invoked by SQLite after opening
** a write transaction to indicate that, unless it is rolled back for some
** reason, the entire database file will be overwritten by the current 
** transaction. This is used by VACUUM operations.
**
** <li>[[SQLITE_FCNTL_VFSNAME]]
** ^The [SQLITE_FCNTL_VFSNAME] opcode can be used to obtain the names of
** all [VFSes] in the VFS stack. The names are of all VFS shims and the
** final bottom-level VFS are written into memory obtained from 
** [sqlite3_malloc()] and the result is stored in the char* variable
** that the fourth parameter of [sqlite3_file_control()] points to.
** The caller is responsible for freeing the memory when done. As with
** all file-control actions, there is no guarantee that this will actually
** do anything. Callers should initialize the char* variable to a NULL
** pointer in case this file-control is not implemented. This file-control
** is intended for diagnostic use only.
**
** <li>[[SQLITE_FCNTL_PRAGMA]]
** ^Whenever a [PRAGMA] statement is parsed, an [SQLITE_FCNTL_PRAGMA] 
** file control is sent to the open [sqlite3_file] object corresponding
** to the database file to which the pragma statement refers. ^The argument
** to the [SQLITE_FCNTL_PRAGMA] file control is an array of
** pointers to strings (char**) in which the second element of the array
** is the name of the pragma and the third element is the argument to the
** pragma or NULL if the pragma has no argument. ^The handler for an
** [SQLITE_FCNTL_PRAGMA] file control can optionally make the first element
** of the char** argument point to a string obtained from [sqlite3_mprintf()]
** or the equivalent and that string will become the result of the pragma or
** the error message if the pragma fails. ^If the
** [SQLITE_FCNTL_PRAGMA] file control returns [SQLITE_NOTFOUND], then normal 
** [PRAGMA] processing continues. ^If the [SQLITE_FCNTL_PRAGMA]
** file control returns [SQLITE_OK], then the parser assumes that the
** VFS has handled the PRAGMA itself and the parser generates a no-op
** prepared statement if result string is NULL, or that returns a copy
** of the result string if the string is non-NULL.
** ^If the [SQLITE_FCNTL_PRAGMA] file control returns
** any result code other than [SQLITE_OK] or [SQLITE_NOTFOUND], that means
** that the VFS encountered an error while handling the [PRAGMA] and the
** compilation of the PRAGMA fails with an error. ^The [SQLITE_FCNTL_PRAGMA]
** file control occurs at the beginning of pragma statement analysis and so
** it is able to override built-in [PRAGMA] statements.
**
** <li>[[SQLITE_FCNTL_BUSYHANDLER]]
** ^The [SQLITE_FCNTL_BUSYHANDLER]
** file-control may be invoked by SQLite on the database file handle
** shortly after it is opened in order to provide a custom VFS with access
** to the connections busy-handler callback. The argument is of type (void **)
** - an array of two (void *) values. The first (void *) actually points
** to a function of type (int (*)(void *)). In order to invoke the connections
** busy-handler, this function should be invoked with the second (void *) in
** the array as the only argument. If it returns non-zero, then the operation
** should be retried. If it returns zero, the custom VFS should abandon the
** current operation.
**
** <li>[[SQLITE_FCNTL_TEMPFILENAME]]
** ^Application can invoke the [SQLITE_FCNTL_TEMPFILENAME] file-control
** to have SQLite generate a
** temporary filename using the same algorithm that is followed to generate
** temporary filenames for TEMP tables and other internal uses. The
** argument should be a char** which will be filled with the filename
** written into memory obtained from [sqlite3_malloc()]. The caller should
** invoke [sqlite3_free()] on the result to avoid a memory leak.
**
** <li>[[SQLITE_FCNTL_MMAP_SIZE]]
** The [SQLITE_FCNTL_MMAP_SIZE] file control is used to query or set the
** maximum number of bytes that will be used for memory-mapped I/O.
** The argument is a pointer to a value of type sqlite3_int64 that
** is an advisory maximum number of bytes in the file to memory map. The
** pointer is overwritten with the old value. The limit is not changed if
** the value originally pointed to is negative, and so the current limit 
** can be queried by passing in a pointer to a negative number. This
** file-control is used internally to implement [PRAGMA mmap_size].
**
** <li>[[SQLITE_FCNTL_TRACE]]
** The [SQLITE_FCNTL_TRACE] file control provides advisory information
** to the VFS about what the higher layers of the SQLite stack are doing.
** This file control is used by some VFS activity tracing [shims].
** The argument is a zero-terminated string. Higher layers in the
** SQLite stack may generate instances of this file control if
** the [SQLITE_USE_FCNTL_TRACE] compile-time option is enabled.
**
** <li>[[SQLITE_FCNTL_HAS_MOVED]]
** The [SQLITE_FCNTL_HAS_MOVED] file control interprets its argument as a
** pointer to an integer and it writes a boolean into that integer depending
** on whether or not the file has been renamed, moved, or deleted since it
** was first opened.
**
** <li>[[SQLITE_FCNTL_WIN32_SET_HANDLE]]
** The [SQLITE_FCNTL_WIN32_SET_HANDLE] opcode is used for debugging. This
** opcode causes the xFileControl method to swap the file handle with the one
** pointed to by the pArg argument. This capability is used during testing
** and only needs to be supported when SQLITE_TEST is defined.
**
** <li>[[SQLITE_FCNTL_WAL_BLOCK]]
** The [SQLITE_FCNTL_WAL_BLOCK] is a signal to the VFS layer that it might
** be advantageous to block on the next WAL lock if the lock is not immediately
** available. The WAL subsystem issues this signal during rare
** circumstances in order to fix a problem with priority inversion.
** Applications should not use this file-control.
**
** </ul>
*/
#define SQLITE_FCNTL_LOCKSTATE 1
#define SQLITE_FCNTL_GET_LOCKPROXYFILE 2
#define SQLITE_FCNTL_SET_LOCKPROXYFILE 3
#define SQLITE_FCNTL_LAST_ERRNO 4
#define SQLITE_FCNTL_SIZE_HINT 5
#define SQLITE_FCNTL_CHUNK_SIZE 6
#define SQLITE_FCNTL_FILE_POINTER 7
#define SQLITE_FCNTL_SYNC_OMITTED 8
#define SQLITE_FCNTL_WIN32_AV_RETRY 9
#define SQLITE_FCNTL_PERSIST_WAL 10
#define SQLITE_FCNTL_OVERWRITE 11
#define SQLITE_FCNTL_VFSNAME 12
#define SQLITE_FCNTL_POWERSAFE_OVERWRITE 13
#define SQLITE_FCNTL_PRAGMA 14
#define SQLITE_FCNTL_BUSYHANDLER 15
#define SQLITE_FCNTL_TEMPFILENAME 16
#define SQLITE_FCNTL_MMAP_SIZE 18
#define SQLITE_FCNTL_TRACE 19
#define SQLITE_FCNTL_HAS_MOVED 20
#define SQLITE_FCNTL_SYNC 21
#define SQLITE_FCNTL_COMMIT_PHASETWO 22
#define SQLITE_FCNTL_WIN32_SET_HANDLE 23
#define SQLITE_FCNTL_WAL_BLOCK 24

/* deprecated names */
#define SQLITE_GET_LOCKPROXYFILE      SQLITE_FCNTL_GET_LOCKPROXYFILE
#define SQLITE_SET_LOCKPROXYFILE      SQLITE_FCNTL_SET_LOCKPROXYFILE
#define SQLITE_LAST_ERRNO             SQLITE_FCNTL_LAST_ERRNO

/*
** CAPI3REF: Mutex Handle
**
** The mutex module within SQLite defines [sqlite3_mutex] to be an
** abstract type for a mutex object.  The SQLite core never looks
** at the internal representation of an [sqlite3_mutex].  It only
** deals with pointers to the [sqlite3_mutex] object.
**
** Mutexes are created using [sqlite3_mutex_alloc()].
*/
typedef struct sqlite3_mutex sqlite3_mutex;

/*
** CAPI3REF: OS Interface Object
**
** An instance of the sqlite3_vfs object defines the interface between
** the SQLite core and the underlying operating system. The "vfs"
** in the name of the object stands for "virtual file system". See
** the [VFS | VFS documentation] for further information.
**
** The value of the iVersion field is initially 1 but may be larger in
** future versions of SQLite. Additional fields may be appended to this
** object when the iVersion value is increased. Note that the structure
** of the sqlite3_vfs object changes in the transaction between
** SQLite version 3.5.9 and 3.6.0 and yet the iVersion field was not
** modified.
**
** The szOsFile field is the size of the subclassed [sqlite3_file]
** structure used by this VFS. mxPathname is the maximum length of
** a pathname in this VFS.
**
** Registered sqlite3_vfs objects are kept on a linked list formed by
** the pNext pointer. The [sqlite3_vfs_register()]
** and [sqlite3_vfs_unregister()] interfaces manage this list
** in a thread-safe way. The [sqlite3_vfs_find()] interface
** searches the list. Neither the application code nor the VFS
** implementation should use the pNext pointer.
**
** The pNext field is the only field in the sqlite3_vfs
** structure that SQLite will ever modify. SQLite will only access
** or modify this field while holding a particular static mutex.
** The application should never modify anything within the sqlite3_vfs
** object once the object has been registered.
**
** The zName field holds the name of the VFS module. The name must
** be unique across all VFS modules.
**
** [[sqlite3_vfs.xOpen]]
** ^SQLite guarantees that the zFilename parameter to xOpen
** is either a NULL pointer or string obtained
** from xFullPathname() with an optional suffix added.
** ^If a suffix is added to the zFilename parameter, it will
** consist of a single "-" character followed by no more than
** 11 alphanumeric and/or "-" characters.
** ^SQLite further guarantees that
** the string will be valid and unchanged until xClose() is
** called. Because of the previous sentence,
** the [sqlite3_file] can safely store a pointer to the
** filename if it needs to remember the filename for some reason.
** If the zFilename parameter to xOpen is a NULL pointer then xOpen
** must invent its own temporary name for the file. ^Whenever the 
** xFilename parameter is NULL it will also be the case that the
** flags parameter will include [SQLITE_OPEN_DELETEONCLOSE].
**
** The flags argument to xOpen() includes all bits set in
** the flags argument to [sqlite3_open_v2()]. Or if [sqlite3_open()]
** or [sqlite3_open16()] is used, then flags includes at least
** [SQLITE_OPEN_READWRITE] | [SQLITE_OPEN_CREATE]. 
** If xOpen() opens a file read-only then it sets *pOutFlags to
** include [SQLITE_OPEN_READONLY]. Other bits in *pOutFlags may be set.
**
** ^(SQLite will also add one of the following flags to the xOpen()
** call, depending on the object being opened:
**
** <ul>
** <li> [SQLITE_OPEN_MAIN_DB]
** <li> [SQLITE_OPEN_MAIN_JOURNAL]
** <li> [SQLITE_OPEN_TEMP_DB]
** <li> [SQLITE_OPEN_TEMP_JOURNAL]
** <li> [SQLITE_OPEN_TRANSIENT_DB]
** <li> [SQLITE_OPEN_SUBJOURNAL]
** <li> [SQLITE_OPEN_MASTER_JOURNAL]
** <li> [SQLITE_OPEN_WAL]
** </ul>)^
**
** The file I/O implementation can use the object type flags to
** change the way it deals with files. For example, an application
** that does not care about crash recovery or rollback might make
** the open of a journal file a no-op. Writes to this journal would
** also be no-ops, and any attempt to read the journal would return
** SQLITE_IOERR. Or the implementation might recognize that a database
** file will be doing page-aligned sector reads and writes in a random
** order and set up its I/O subsystem accordingly.
**
** SQLite might also add one of the following flags to the xOpen method:
**
** <ul>
** <li> [SQLITE_OPEN_DELETEONCLOSE]
** <li> [SQLITE_OPEN_EXCLUSIVE]
** </ul>
**
** The [SQLITE_OPEN_DELETEONCLOSE] flag means the file should be
** deleted when it is closed. ^The [SQLITE_OPEN_DELETEONCLOSE]
** will be set for TEMP databases and their journals, transient
** databases, and subjournals.
**
** ^The [SQLITE_OPEN_EXCLUSIVE] flag is always used in conjunction
** with the [SQLITE_OPEN_CREATE] flag, which are both directly
** analogous to the O_EXCL and O_CREAT flags of the POSIX open()
** API. The SQLITE_OPEN_EXCLUSIVE flag, when paired with the 
** SQLITE_OPEN_CREATE, is used to indicate that file should always
** be created, and that it is an error if it already exists.
** It is not used to indicate the file should be opened 
** for exclusive access.
**
** ^At least szOsFile bytes of memory are allocated by SQLite
** to hold the [sqlite3_file] structure passed as the third
** argument to xOpen. The xOpen method does not have to
** allocate the structure; it should just fill it in. Note that
** the xOpen method must set the sqlite3_file.pMethods to either
** a valid [sqlite3_io_methods] object or to NULL. xOpen must do
** this even if the open fails. SQLite expects that the sqlite3_file.pMethods
** element will be valid after xOpen returns regardless of the success
** or failure of the xOpen call.
**
** [[sqlite3_vfs.xAccess]]
** ^The flags argument to xAccess() may be [SQLITE_ACCESS_EXISTS]
** to test for the existence of a file, or [SQLITE_ACCESS_READWRITE] to
** test whether a file is readable and writable, or [SQLITE_ACCESS_READ]
** to test whether a file is at least readable. The file can be a
** directory.
**
** ^SQLite will always allocate at least mxPathname+1 bytes for the
** output buffer xFullPathname. The exact size of the output buffer
** is also passed as a parameter to both methods. If the output buffer
** is not large enough, [SQLITE_CANTOPEN] should be returned. Since this is
** handled as a fatal error by SQLite, vfs implementations should endeavor
** to prevent this by setting mxPathname to a sufficiently large value.
**
** The xRandomness(), xSleep(), xCurrentTime(), and xCurrentTimeInt64()
** interfaces are not strictly a part of the filesystem, but they are
** included in the VFS structure for completeness.
** The xRandomness() function attempts to return nBytes bytes
** of good-quality randomness into zOut. The return value is
** the actual number of bytes of randomness obtained.
** The xSleep() method causes the calling thread to sleep for at
** least the number of microseconds given. ^The xCurrentTime()
** method returns a Julian Day Number for the current date and time as
** a floating point value.
** ^The xCurrentTimeInt64() method returns, as an integer, the Julian
** Day Number multiplied by 86400000 (the number of milliseconds in 
** a 24-hour day). 
** ^SQLite will use the xCurrentTimeInt64() method to get the current
** date and time if that method is available (if iVersion is 2 or 
** greater and the function pointer is not NULL) and will fall back
** to xCurrentTime() if xCurrentTimeInt64() is unavailable.
**
** ^The xSetSystemCall(), xGetSystemCall(), and xNestSystemCall() interfaces
** are not used by the SQLite core. These optional interfaces are provided
** by some VFSes to facilitate testing of the VFS code. By overriding 
** system calls with functions under its control, a test program can
** simulate faults and error conditions that would otherwise be difficult
** or impossible to induce. The set of system calls that can be overridden
** varies from one VFS to another, and from one version of the same VFS to the
** next. Applications that use these interfaces must be prepared for any
** or all of these interfaces to be NULL or for their behavior to change
** from one release to the next. Applications must not attempt to access
** any of these methods if the iVersion of the VFS is less than 3.
*/
typedef struct sqlite3_vfs sqlite3_vfs;
typedef void (*sqlite3_syscall_ptr)(void);
struct sqlite3_vfs {
 int iVersion; /* Structure version number (currently 3) */
 int szOsFile; /* Size of subclassed sqlite3_file */
 int mxPathname; /* Maximum file pathname length */
 sqlite3_vfs *pNext; /* Next registered VFS */
 const char *zName; /* Name of this virtual file system */
 void *pAppData; /* Pointer to application-specific data */
 int (*xOpen)(sqlite3_vfs*, const char *zName, sqlite3_file*,
 int flags, int *pOutFlags);
 int (*xDelete)(sqlite3_vfs*, const char *zName, int syncDir);
 int (*xAccess)(sqlite3_vfs*, const char *zName, int flags, int *pResOut);
 int (*xFullPathname)(sqlite3_vfs*, const char *zName, int nOut, char *zOut);
 void *(*xDlOpen)(sqlite3_vfs*, const char *zFilename);
 void (*xDlError)(sqlite3_vfs*, int nByte, char *zErrMsg);
 void (*(*xDlSym)(sqlite3_vfs*,void*, const char *zSymbol))(void);
 void (*xDlClose)(sqlite3_vfs*, void*);
 int (*xRandomness)(sqlite3_vfs*, int nByte, char *zOut);
 int (*xSleep)(sqlite3_vfs*, int microseconds);
 int (*xCurrentTime)(sqlite3_vfs*, double*);
 int (*xGetLastError)(sqlite3_vfs*, int, char *);
 /*
 ** The methods above are in version 1 of the sqlite_vfs object
 ** definition. Those that follow are added in version 2 or later
 */
 int (*xCurrentTimeInt64)(sqlite3_vfs*, sqlite3_int64*);
 /*
 ** The methods above are in versions 1 and 2 of the sqlite_vfs object.
 ** Those below are for version 3 and greater.
 */
 int (*xSetSystemCall)(sqlite3_vfs*, const char *zName, sqlite3_syscall_ptr);
 sqlite3_syscall_ptr (*xGetSystemCall)(sqlite3_vfs*, const char *zName);
 const char *(*xNextSystemCall)(sqlite3_vfs*, const char *zName);
 /*
 ** The methods above are in versions 1 through 3 of the sqlite_vfs object.
 ** New fields may be appended in figure versions. The iVersion
 ** value will increment whenever this happens. 
 */
};

/*
** CAPI3REF: Flags for the xAccess VFS method
**
** These integer constants can be used as the third parameter to
** the xAccess method of an [sqlite3_vfs] object.  They determine
** what kind of permissions the xAccess method is looking for.
** With SQLITE_ACCESS_EXISTS, the xAccess method
** simply checks whether the file exists.
** With SQLITE_ACCESS_READWRITE, the xAccess method
** checks whether the named directory is both readable and writable
** (in other words, if files can be added, removed, and renamed within
** the directory).
** The SQLITE_ACCESS_READWRITE constant is currently used only by the
** [temp_store_directory pragma], though this could change in a future
** release of SQLite.
** With SQLITE_ACCESS_READ, the xAccess method
** checks whether the file is readable.  The SQLITE_ACCESS_READ constant is
** currently unused, though it might be used in a future release of
** SQLite.
*/
#define SQLITE_ACCESS_EXISTS    0
#define SQLITE_ACCESS_READWRITE 1   /* Used by PRAGMA temp_store_directory */
#define SQLITE_ACCESS_READ      2   /* Unused */

/*
** CAPI3REF: Flags for the xShmLock VFS method
**
** These integer constants define the various locking operations
** allowed by the xShmLock method of [sqlite3_io_methods]. The
** following are the only legal combinations of flags to the
** xShmLock method:
**
** <ul>
** <li> SQLITE_SHM_LOCK | SQLITE_SHM_SHARED
** <li> SQLITE_SHM_LOCK | SQLITE_SHM_EXCLUSIVE
** <li> SQLITE_SHM_UNLOCK | SQLITE_SHM_SHARED
** <li> SQLITE_SHM_UNLOCK | SQLITE_SHM_EXCLUSIVE
** </ul>
**
** When unlocking, the same SHARED or EXCLUSIVE flag must be supplied as
** was given on the corresponding lock. 
**
** The xShmLock method can transition between unlocked and SHARED or
** between unlocked and EXCLUSIVE. It cannot transition between SHARED
** and EXCLUSIVE.
*/
#define SQLITE_SHM_UNLOCK 1
#define SQLITE_SHM_LOCK 2
#define SQLITE_SHM_SHARED 4
#define SQLITE_SHM_EXCLUSIVE 8

/*
** CAPI3REF: Maximum xShmLock index
**
** The xShmLock method on [sqlite3_io_methods] may use values
** between 0 and this upper bound as its "offset" argument.
** The SQLite core will never attempt to acquire or release a
** lock outside of this range
*/
#define SQLITE_SHM_NLOCK        8

/*
** CAPI3REF: Initialize The SQLite Library
**
** ^The sqlite3_initialize() routine initializes the
** SQLite library.  ^The sqlite3_shutdown() routine
** deallocates any resources that were allocated by sqlite3_initialize().
** These routines are designed to aid in process initialization and
** shutdown on embedded systems.  Workstation applications using
** SQLite normally do not need to invoke either of these routines.
**
** A call to sqlite3_initialize() is an "effective" call if it is
** the first time sqlite3_initialize() is invoked during the lifetime of
** the process, or if it is the first time sqlite3_initialize() is invoked
** following a call to sqlite3_shutdown().  ^(Only an effective call
** of sqlite3_initialize() does any initialization.  All other calls
** are harmless no-ops.)^
**
** A call to sqlite3_shutdown() is an "effective" call if it is the first
** call to sqlite3_shutdown() since the last sqlite3_initialize().  ^(Only
** an effective call to sqlite3_shutdown() does any deinitialization.
** All other valid calls to sqlite3_shutdown() are harmless no-ops.)^
**
** The sqlite3_initialize() interface is threadsafe, but sqlite3_shutdown()
** is not.  The sqlite3_shutdown() interface must only be called from a
** single thread.  All open [database connections] must be closed and all
** other SQLite resources must be deallocated prior to invoking
** sqlite3_shutdown().
**
** Among other things, ^sqlite3_initialize() will invoke
** sqlite3_os_init().  Similarly, ^sqlite3_shutdown()
** will invoke sqlite3_os_end().
**
** ^The sqlite3_initialize() routine returns [SQLITE_OK] on success.
** ^If for some reason, sqlite3_initialize() is unable to initialize
** the library (perhaps it is unable to allocate a needed resource such
** as a mutex) it returns an [error code] other than [SQLITE_OK].
**
** ^The sqlite3_initialize() routine is called internally by many other
** SQLite interfaces so that an application usually does not need to
** invoke sqlite3_initialize() directly.  For example, [sqlite3_open()]
** calls sqlite3_initialize() so the SQLite library will be automatically
** initialized when [sqlite3_open()] is called if it has not be initialized
** already.  ^However, if SQLite is compiled with the [SQLITE_OMIT_AUTOINIT]
** compile-time option, then the automatic calls to sqlite3_initialize()
** are omitted and the application must call sqlite3_initialize() directly
** prior to using any other SQLite interface.  For maximum portability,
** it is recommended that applications always invoke sqlite3_initialize()
** directly prior to using any other SQLite interface.  Future releases
** of SQLite may require this.  In other words, the behavior exhibited
** when SQLite is compiled with [SQLITE_OMIT_AUTOINIT] might become the
** default behavior in some future release of SQLite.
**
** The sqlite3_os_init() routine does operating-system specific
** initialization of the SQLite library.  The sqlite3_os_end()
** routine undoes the effect of sqlite3_os_init().  Typical tasks
** performed by these routines include allocation or deallocation
** of static resources, initialization of global variables,
** setting up a default [sqlite3_vfs] module, or setting up
** a default configuration using [sqlite3_config()].
**
** The application should never invoke either sqlite3_os_init()
** or sqlite3_os_end() directly.  The application should only invoke
** sqlite3_initialize() and sqlite3_shutdown().  The sqlite3_os_init()
** interface is called automatically by sqlite3_initialize() and
** sqlite3_os_end() is called by sqlite3_shutdown().  Appropriate
** implementations for sqlite3_os_init() and sqlite3_os_end()
** are built into SQLite when it is compiled for Unix, Windows, or OS/2.
** When [custom builds | built for other platforms]
** (using the [SQLITE_OS_OTHER=1] compile-time
** option) the application must supply a suitable implementation for
** sqlite3_os_init() and sqlite3_os_end().  An application-supplied
** implementation of sqlite3_os_init() or sqlite3_os_end()
** must return [SQLITE_OK] on success and some other [error code] upon
** failure.
*/
SQLITE_API int SQLITE_STDCALL sqlite3_initialize(void);
SQLITE_API int SQLITE_STDCALL sqlite3_shutdown(void);
SQLITE_API int SQLITE_STDCALL sqlite3_os_init(void);
SQLITE_API int SQLITE_STDCALL sqlite3_os_end(void);

/*
** CAPI3REF: Configuring The SQLite Library
**
** The sqlite3_config() interface is used to make global configuration
** changes to SQLite in order to tune SQLite to the specific needs of
** the application.  The default configuration is recommended for most
** applications and so this routine is usually not necessary.  It is
** provided to support rare applications with unusual needs.
**
** The sqlite3_config() interface is not threadsafe.  The application
** must insure that no other SQLite interfaces are invoked by other
** threads while sqlite3_config() is running.  Furthermore, sqlite3_config()
** may only be invoked prior to library initialization using
** [sqlite3_initialize()] or after shutdown by [sqlite3_shutdown()].
** ^If sqlite3_config() is called after [sqlite3_initialize()] and before
** [sqlite3_shutdown()] then it will return SQLITE_MISUSE.
** Note, however, that ^sqlite3_config() can be called as part of the
** implementation of an application-defined [sqlite3_os_init()].
**
** The first argument to sqlite3_config() is an integer
** [configuration option] that determines
** what property of SQLite is to be configured.  Subsequent arguments
** vary depending on the [configuration option]
** in the first argument.
**
** ^When a configuration option is set, sqlite3_config() returns [SQLITE_OK].
** ^If the option is unknown or SQLite is unable to set the option
** then this routine returns a non-zero [error code].
*/
SQLITE_API int SQLITE_CDECL sqlite3_config(int, ...);

/*
** CAPI3REF: Configure database connections
** METHOD: sqlite3
**
** The sqlite3_db_config() interface is used to make configuration
** changes to a [database connection].  The interface is similar to
** [sqlite3_config()] except that the changes apply to a single
** [database connection] (specified in the first argument).
**
** The second argument to sqlite3_db_config(D,V,...)  is the
** [SQLITE_DBCONFIG_LOOKASIDE | configuration verb] - an integer code 
** that indicates what aspect of the [database connection] is being configured.
** Subsequent arguments vary depending on the configuration verb.
**
** ^Calls to sqlite3_db_config() return SQLITE_OK if and only if
** the call is considered successful.
*/
SQLITE_API int SQLITE_CDECL sqlite3_db_config(sqlite3*, int op, ...);

/*
** CAPI3REF: Memory Allocation Routines
**
** An instance of this object defines the interface between SQLite
** and low-level memory allocation routines.
**
** This object is used in only one place in the SQLite interface.
** A pointer to an instance of this object is the argument to
** [sqlite3_config()] when the configuration option is
** [SQLITE_CONFIG_MALLOC] or [SQLITE_CONFIG_GETMALLOC].  
** By creating an instance of this object
** and passing it to [sqlite3_config]([SQLITE_CONFIG_MALLOC])
** during configuration, an application can specify an alternative
** memory allocation subsystem for SQLite to use for all of its
** dynamic memory needs.
**
** Note that SQLite comes with several [built-in memory allocators]
** that are perfectly adequate for the overwhelming majority of applications
** and that this object is only useful to a tiny minority of applications
** with specialized memory allocation requirements.  This object is
** also used during testing of SQLite in order to specify an alternative
** memory allocator that simulates memory out-of-memory conditions in
** order to verify that SQLite recovers gracefully from such
** conditions.
**
** The xMalloc, xRealloc, and xFree methods must work like the
** malloc(), realloc() and free() functions from the standard C library.
** ^SQLite guarantees that the second argument to
** xRealloc is always a value returned by a prior call to xRoundup.
**
** xSize should return the allocated size of a memory allocation
** previously obtained from xMalloc or xRealloc.  The allocated size
** is always at least as big as the requested size but may be larger.
**
** The xRoundup method returns what would be the allocated size of
** a memory allocation given a particular requested size.  Most memory
** allocators round up memory allocations at least to the next multiple
** of 8.  Some allocators round up to a larger multiple or to a power of 2.
** Every memory allocation request coming in through [sqlite3_malloc()]
** or [sqlite3_realloc()] first calls xRoundup.  If xRoundup returns 0, 
** that causes the corresponding memory allocation to fail.
**
** The xInit method initializes the memory allocator.  For example,
** it might allocate any require mutexes or initialize internal data
** structures.  The xShutdown method is invoked (indirectly) by
** [sqlite3_shutdown()] and should deallocate any resources acquired
** by xInit.  The pAppData pointer is used as the only parameter to
** xInit and xShutdown.
**
** SQLite holds the [SQLITE_MUTEX_STATIC_MASTER] mutex when it invokes
** the xInit method, so the xInit method need not be threadsafe.  The
** xShutdown method is only called from [sqlite3_shutdown()] so it does
** not need to be threadsafe either.  For all other methods, SQLite
** holds the [SQLITE_MUTEX_STATIC_MEM] mutex as long as the
** [SQLITE_CONFIG_MEMSTATUS] configuration option is turned on (which
** it is by default) and so the methods are automatically serialized.
** However, if [SQLITE_CONFIG_MEMSTATUS] is disabled, then the other
** methods must be threadsafe or else make their own arrangements for
** serialization.
**
** SQLite will never invoke xInit() more than once without an intervening
** call to xShutdown().
*/
typedef struct sqlite3_mem_methods sqlite3_mem_methods;
struct sqlite3_mem_methods {
  void *(*xMalloc)(int);         /* Memory allocation function */
  void (*xFree)(void*);          /* Free a prior allocation */
  void *(*xRealloc)(void*,int);  /* Resize an allocation */
  int (*xSize)(void*);           /* Return the size of an allocation */
  int (*xRoundup)(int);          /* Round up request size to allocation size */
  int (*xInit)(void*);           /* Initialize the memory allocator */
  void (*xShutdown)(void*);      /* Deinitialize the memory allocator */
  void *pAppData;                /* Argument to xInit() and xShutdown() */
};

/*
** CAPI3REF: Configuration Options
** KEYWORDS: {configuration option}
**
** These constants are the available integer configuration options that
** can be passed as the first argument to the [sqlite3_config()] interface.
**
** New configuration options may be added in future releases of SQLite.
** Existing configuration options might be discontinued. Applications
** should check the return code from [sqlite3_config()] to make sure that
** the call worked. The [sqlite3_config()] interface will return a
** non-zero [error code] if a discontinued or unsupported configuration option
** is invoked.
**
** <dl>
** [[SQLITE_CONFIG_SINGLETHREAD]] <dt>SQLITE_CONFIG_SINGLETHREAD</dt>
** <dd>There are no arguments to this option. ^This option sets the
** [threading mode] to Single-thread. In other words, it disables
** all mutexing and puts SQLite into a mode where it can only be used
** by a single thread. ^If SQLite is compiled with
** the [SQLITE_THREADSAFE | SQLITE_THREADSAFE=0] compile-time option then
** it is not possible to change the [threading mode] from its default
** value of Single-thread and so [sqlite3_config()] will return 
** [SQLITE_ERROR] if called with the SQLITE_CONFIG_SINGLETHREAD
** configuration option.</dd>
**
** [[SQLITE_CONFIG_MULTITHREAD]] <dt>SQLITE_CONFIG_MULTITHREAD</dt>
** <dd>There are no arguments to this option. ^This option sets the
** [threading mode] to Multi-thread. In other words, it disables
** mutexing on [database connection] and [prepared statement] objects.
** The application is responsible for serializing access to
** [database connections] and [prepared statements]. But other mutexes
** are enabled so that SQLite will be safe to use in a multi-threaded
** environment as long as no two threads attempt to use the same
** [database connection] at the same time. ^If SQLite is compiled with
** the [SQLITE_THREADSAFE | SQLITE_THREADSAFE=0] compile-time option then
** it is not possible to set the Multi-thread [threading mode] and
** [sqlite3_config()] will return [SQLITE_ERROR] if called with the
** SQLITE_CONFIG_MULTITHREAD configuration option.</dd>
**
** [[SQLITE_CONFIG_SERIALIZED]] <dt>SQLITE_CONFIG_SERIALIZED</dt>
** <dd>There are no arguments to this option. ^This option sets the
** [threading mode] to Serialized. In other words, this option enables
** all mutexes including the recursive
** mutexes on [database connection] and [prepared statement] objects.
** In this mode (which is the default when SQLite is compiled with
** [SQLITE_THREADSAFE=1]) the SQLite library will itself serialize access
** to [database connections] and [prepared statements] so that the
** application is free to use the same [database connection] or the
** same [prepared statement] in different threads at the same time.
** ^If SQLite is compiled with
** the [SQLITE_THREADSAFE | SQLITE_THREADSAFE=0] compile-time option then
** it is not possible to set the Serialized [threading mode] and
** [sqlite3_config()] will return [SQLITE_ERROR] if called with the
** SQLITE_CONFIG_SERIALIZED configuration option.</dd>
**
** [[SQLITE_CONFIG_MALLOC]] <dt>SQLITE_CONFIG_MALLOC</dt>
** <dd> ^(The SQLITE_CONFIG_MALLOC option takes a single argument which is 
** a pointer to an instance of the [sqlite3_mem_methods] structure.
** The argument specifies
** alternative low-level memory allocation routines to be used in place of
** the memory allocation routines built into SQLite.)^ ^SQLite makes
** its own private copy of the content of the [sqlite3_mem_methods] structure
** before the [sqlite3_config()] call returns.</dd>
**
** [[SQLITE_CONFIG_GETMALLOC]] <dt>SQLITE_CONFIG_GETMALLOC</dt>
** <dd> ^(The SQLITE_CONFIG_GETMALLOC option takes a single argument which
** is a pointer to an instance of the [sqlite3_mem_methods] structure.
** The [sqlite3_mem_methods]
** structure is filled with the currently defined memory allocation routines.)^
** This option can be used to overload the default memory allocation
** routines with a wrapper that simulations memory allocation failure or
** tracks memory usage, for example. </dd>
**
** [[SQLITE_CONFIG_MEMSTATUS]] <dt>SQLITE_CONFIG_MEMSTATUS</dt>
** <dd> ^The SQLITE_CONFIG_MEMSTATUS option takes single argument of type int,
** interpreted as a boolean, which enables or disables the collection of
** memory allocation statistics. ^(When memory allocation statistics are
** disabled, the following SQLite interfaces become non-operational:
** <ul>
** <li> [sqlite3_memory_used()]
** <li> [sqlite3_memory_highwater()]
** <li> [sqlite3_soft_heap_limit64()]
** <li> [sqlite3_status64()]
** </ul>)^
** ^Memory allocation statistics are enabled by default unless SQLite is
** compiled with [SQLITE_DEFAULT_MEMSTATUS]=0 in which case memory
** allocation statistics are disabled by default.
** </dd>
**
** [[SQLITE_CONFIG_SCRATCH]] <dt>SQLITE_CONFIG_SCRATCH</dt>
** <dd> ^The SQLITE_CONFIG_SCRATCH option specifies a static memory buffer
** that SQLite can use for scratch memory. ^(There are three arguments
** to SQLITE_CONFIG_SCRATCH: A pointer an 8-byte
** aligned memory buffer from which the scratch allocations will be
** drawn, the size of each scratch allocation (sz),
** and the maximum number of scratch allocations (N).)^
** The first argument must be a pointer to an 8-byte aligned buffer
** of at least sz*N bytes of memory.
** ^SQLite will not use more than one scratch buffers per thread.
** ^SQLite will never request a scratch buffer that is more than 6
** times the database page size.
** ^If SQLite needs needs additional
** scratch memory beyond what is provided by this configuration option, then 
** [sqlite3_malloc()] will be used to obtain the memory needed.
** ^When the application provides any amount of scratch memory using
** SQLITE_CONFIG_SCRATCH, SQLite avoids unnecessary large
** [sqlite3_malloc|heap allocations].
** This can help [Robson proof|prevent memory allocation failures] due to heap
** fragmentation in low-memory embedded systems.
** </dd>
**
** [[SQLITE_CONFIG_PAGECACHE]] <dt>SQLITE_CONFIG_PAGECACHE</dt>
** <dd> ^The SQLITE_CONFIG_PAGECACHE option specifies a static memory buffer
** that SQLite can use for the database page cache with the default page
** cache implementation. 
** This configuration should not be used if an application-define page
** cache implementation is loaded using the [SQLITE_CONFIG_PCACHE2]
** configuration option.
** ^There are three arguments to SQLITE_CONFIG_PAGECACHE: A pointer to
** 8-byte aligned
** memory, the size of each page buffer (sz), and the number of pages (N).
** The sz argument should be the size of the largest database page
** (a power of two between 512 and 65536) plus some extra bytes for each
** page header. ^The number of extra bytes needed by the page header
** can be determined using the [SQLITE_CONFIG_PCACHE_HDRSZ] option 
** to [sqlite3_config()].
** ^It is harmless, apart from the wasted memory,
** for the sz parameter to be larger than necessary. The first
** argument should pointer to an 8-byte aligned block of memory that
** is at least sz*N bytes of memory, otherwise subsequent behavior is
** undefined.
** ^SQLite will use the memory provided by the first argument to satisfy its
** memory needs for the first N pages that it adds to cache. ^If additional
** page cache memory is needed beyond what is provided by this option, then
** SQLite goes to [sqlite3_malloc()] for the additional storage space.</dd>
**
** [[SQLITE_CONFIG_HEAP]] <dt>SQLITE_CONFIG_HEAP</dt>
** <dd> ^The SQLITE_CONFIG_HEAP option specifies a static memory buffer 
** that SQLite will use for all of its dynamic memory allocation needs
** beyond those provided for by [SQLITE_CONFIG_SCRATCH] and
** [SQLITE_CONFIG_PAGECACHE].
** ^The SQLITE_CONFIG_HEAP option is only available if SQLite is compiled
** with either [SQLITE_ENABLE_MEMSYS3] or [SQLITE_ENABLE_MEMSYS5] and returns
** [SQLITE_ERROR] if invoked otherwise.
** ^There are three arguments to SQLITE_CONFIG_HEAP:
** An 8-byte aligned pointer to the memory,
** the number of bytes in the memory buffer, and the minimum allocation size.
** ^If the first pointer (the memory pointer) is NULL, then SQLite reverts
** to using its default memory allocator (the system malloc() implementation),
** undoing any prior invocation of [SQLITE_CONFIG_MALLOC]. ^If the
** memory pointer is not NULL then the alternative memory
** allocator is engaged to handle all of SQLites memory allocation needs.
** The first pointer (the memory pointer) must be aligned to an 8-byte
** boundary or subsequent behavior of SQLite will be undefined.
** The minimum allocation size is capped at 2**12. Reasonable values
** for the minimum allocation size are 2**5 through 2**8.</dd>
**
** [[SQLITE_CONFIG_MUTEX]] <dt>SQLITE_CONFIG_MUTEX</dt>
** <dd> ^(The SQLITE_CONFIG_MUTEX option takes a single argument which is a
** pointer to an instance of the [sqlite3_mutex_methods] structure.
** The argument specifies alternative low-level mutex routines to be used
** in place the mutex routines built into SQLite.)^ ^SQLite makes a copy of
** the content of the [sqlite3_mutex_methods] structure before the call to
** [sqlite3_config()] returns. ^If SQLite is compiled with
** the [SQLITE_THREADSAFE | SQLITE_THREADSAFE=0] compile-time option then
** the entire mutexing subsystem is omitted from the build and hence calls to
** [sqlite3_config()] with the SQLITE_CONFIG_MUTEX configuration option will
** return [SQLITE_ERROR].</dd>
**
** [[SQLITE_CONFIG_GETMUTEX]] <dt>SQLITE_CONFIG_GETMUTEX</dt>
** <dd> ^(The SQLITE_CONFIG_GETMUTEX option takes a single argument which
** is a pointer to an instance of the [sqlite3_mutex_methods] structure. The
** [sqlite3_mutex_methods]
** structure is filled with the currently defined mutex routines.)^
** This option can be used to overload the default mutex allocation
** routines with a wrapper used to track mutex usage for performance
** profiling or testing, for example. ^If SQLite is compiled with
** the [SQLITE_THREADSAFE | SQLITE_THREADSAFE=0] compile-time option then
** the entire mutexing subsystem is omitted from the build and hence calls to
** [sqlite3_config()] with the SQLITE_CONFIG_GETMUTEX configuration option will
** return [SQLITE_ERROR].</dd>
**
** [[SQLITE_CONFIG_LOOKASIDE]] <dt>SQLITE_CONFIG_LOOKASIDE</dt>
** <dd> ^(The SQLITE_CONFIG_LOOKASIDE option takes two arguments that determine
** the default size of lookaside memory on each [database connection].
** The first argument is the
** size of each lookaside buffer slot and the second is the number of
** slots allocated to each database connection.)^ ^(SQLITE_CONFIG_LOOKASIDE
** sets the default lookaside size. The [SQLITE_DBCONFIG_LOOKASIDE]
** option to [sqlite3_db_config()] can be used to change the lookaside
** configuration on individual connections.)^ </dd>
**
** [[SQLITE_CONFIG_PCACHE2]] <dt>SQLITE_CONFIG_PCACHE2</dt>
** <dd> ^(The SQLITE_CONFIG_PCACHE2 option takes a single argument which is 
** a pointer to an [sqlite3_pcache_methods2] object. This object specifies
** the interface to a custom page cache implementation.)^
** ^SQLite makes a copy of the [sqlite3_pcache_methods2] object.</dd>
**
** [[SQLITE_CONFIG_GETPCACHE2]] <dt>SQLITE_CONFIG_GETPCACHE2</dt>
** <dd> ^(The SQLITE_CONFIG_GETPCACHE2 option takes a single argument which
** is a pointer to an [sqlite3_pcache_methods2] object. SQLite copies of
** the current page cache implementation into that object.)^ </dd>
**
** [[SQLITE_CONFIG_LOG]] <dt>SQLITE_CONFIG_LOG</dt>
** <dd> The SQLITE_CONFIG_LOG option is used to configure the SQLite
** global [error log].
** (^The SQLITE_CONFIG_LOG option takes two arguments: a pointer to a
** function with a call signature of void(*)(void*,int,const char*), 
** and a pointer to void. ^If the function pointer is not NULL, it is
** invoked by [sqlite3_log()] to process each logging event. ^If the
** function pointer is NULL, the [sqlite3_log()] interface becomes a no-op.
** ^The void pointer that is the second argument to SQLITE_CONFIG_LOG is
** passed through as the first parameter to the application-defined logger
** function whenever that function is invoked. ^The second parameter to
** the logger function is a copy of the first parameter to the corresponding
** [sqlite3_log()] call and is intended to be a [result code] or an
** [extended result code]. ^The third parameter passed to the logger is
** log message after formatting via [sqlite3_snprintf()].
** The SQLite logging interface is not reentrant; the logger function
** supplied by the application must not invoke any SQLite interface.
** In a multi-threaded application, the application-defined logger
** function must be threadsafe. </dd>
**
** [[SQLITE_CONFIG_URI]] <dt>SQLITE_CONFIG_URI
** <dd>^(The SQLITE_CONFIG_URI option takes a single argument of type int.
** If non-zero, then URI handling is globally enabled. If the parameter is zero,
** then URI handling is globally disabled.)^ ^If URI handling is globally
** enabled, all filenames passed to [sqlite3_open()], [sqlite3_open_v2()],
** [sqlite3_open16()] or
** specified as part of [ATTACH] commands are interpreted as URIs, regardless
** of whether or not the [SQLITE_OPEN_URI] flag is set when the database
** connection is opened. ^If it is globally disabled, filenames are
** only interpreted as URIs if the SQLITE_OPEN_URI flag is set when the
** database connection is opened. ^(By default, URI handling is globally
** disabled. The default value may be changed by compiling with the
** [SQLITE_USE_URI] symbol defined.)^
**
** [[SQLITE_CONFIG_COVERING_INDEX_SCAN]] <dt>SQLITE_CONFIG_COVERING_INDEX_SCAN
** <dd>^The SQLITE_CONFIG_COVERING_INDEX_SCAN option takes a single integer
** argument which is interpreted as a boolean in order to enable or disable
** the use of covering indices for full table scans in the query optimizer.
** ^The default setting is determined
** by the [SQLITE_ALLOW_COVERING_INDEX_SCAN] compile-time option, or is "on"
** if that compile-time option is omitted.
** The ability to disable the use of covering indices for full table scans
** is because some incorrectly coded legacy applications might malfunction
** when the optimization is enabled. Providing the ability to
** disable the optimization allows the older, buggy application code to work
** without change even with newer versions of SQLite.
**
** [[SQLITE_CONFIG_PCACHE]] [[SQLITE_CONFIG_GETPCACHE]]
** <dt>SQLITE_CONFIG_PCACHE and SQLITE_CONFIG_GETPCACHE
** <dd> These options are obsolete and should not be used by new code.
** They are retained for backwards compatibility but are now no-ops.
** </dd>
**
** [[SQLITE_CONFIG_SQLLOG]]
** <dt>SQLITE_CONFIG_SQLLOG
** <dd>This option is only available if sqlite is compiled with the
** [SQLITE_ENABLE_SQLLOG] pre-processor macro defined. The first argument should
** be a pointer to a function of type void(*)(void*,sqlite3*,const char*, int).
** The second should be of type (void*). The callback is invoked by the library
** in three separate circumstances, identified by the value passed as the
** fourth parameter. If the fourth parameter is 0, then the database connection
** passed as the second argument has just been opened. The third argument
** points to a buffer containing the name of the main database file. If the
** fourth parameter is 1, then the SQL statement that the third parameter
** points to has just been executed. Or, if the fourth parameter is 2, then
** the connection being passed as the second parameter is being closed. The
** third parameter is passed NULL In this case. An example of using this
** configuration option can be seen in the "test_sqllog.c" source file in
** the canonical SQLite source tree.</dd>
**
** [[SQLITE_CONFIG_MMAP_SIZE]]
** <dt>SQLITE_CONFIG_MMAP_SIZE
** <dd>^SQLITE_CONFIG_MMAP_SIZE takes two 64-bit integer (sqlite3_int64) values
** that are the default mmap size limit (the default setting for
** [PRAGMA mmap_size]) and the maximum allowed mmap size limit.
** ^The default setting can be overridden by each database connection using
** either the [PRAGMA mmap_size] command, or by using the
** [SQLITE_FCNTL_MMAP_SIZE] file control. ^(The maximum allowed mmap size
** will be silently truncated if necessary so that it does not exceed the
** compile-time maximum mmap size set by the
** [SQLITE_MAX_MMAP_SIZE] compile-time option.)^
** ^If either argument to this option is negative, then that argument is
** changed to its compile-time default.
**
** [[SQLITE_CONFIG_WIN32_HEAPSIZE]]
** <dt>SQLITE_CONFIG_WIN32_HEAPSIZE
** <dd>^The SQLITE_CONFIG_WIN32_HEAPSIZE option is only available if SQLite is
** compiled for Windows with the [SQLITE_WIN32_MALLOC] pre-processor macro
** defined. ^SQLITE_CONFIG_WIN32_HEAPSIZE takes a 32-bit unsigned integer value
** that specifies the maximum size of the created heap.
**
** [[SQLITE_CONFIG_PCACHE_HDRSZ]]
** <dt>SQLITE_CONFIG_PCACHE_HDRSZ
** <dd>^The SQLITE_CONFIG_PCACHE_HDRSZ option takes a single parameter which
** is a pointer to an integer and writes into that integer the number of extra
** bytes per page required for each page in [SQLITE_CONFIG_PAGECACHE].
** The amount of extra space required can change depending on the compiler,
** target platform, and SQLite version.
**
** [[SQLITE_CONFIG_PMASZ]]
** <dt>SQLITE_CONFIG_PMASZ
** <dd>^The SQLITE_CONFIG_PMASZ option takes a single parameter which
** is an unsigned integer and sets the "Minimum PMA Size" for the multithreaded
** sorter to that integer. The default minimum PMA Size is set by the
** [SQLITE_SORTER_PMASZ] compile-time option. New threads are launched
** to help with sort operations when multithreaded sorting
** is enabled (using the [PRAGMA threads] command) and the amount of content
** to be sorted exceeds the page size times the minimum of the
** [PRAGMA cache_size] setting and this value.
** </dl>
*/
#define SQLITE_CONFIG_SINGLETHREAD 1 /* nil */
#define SQLITE_CONFIG_MULTITHREAD 2 /* nil */
#define SQLITE_CONFIG_SERIALIZED 3 /* nil */
#define SQLITE_CONFIG_MALLOC 4 /* sqlite3_mem_methods* */
#define SQLITE_CONFIG_GETMALLOC 5 /* sqlite3_mem_methods* */
#define SQLITE_CONFIG_SCRATCH 6 /* void*, int sz, int N */
#define SQLITE_CONFIG_PAGECACHE 7 /* void*, int sz, int N */
#define SQLITE_CONFIG_HEAP 8 /* void*, int nByte, int min */
#define SQLITE_CONFIG_MEMSTATUS 9 /* boolean */
#define SQLITE_CONFIG_MUTEX 10 /* sqlite3_mutex_methods* */
#define SQLITE_CONFIG_GETMUTEX 11 /* sqlite3_mutex_methods* */
/* previously SQLITE_CONFIG_CHUNKALLOC 12 which is now unused. */ 
#define SQLITE_CONFIG_LOOKASIDE 13 /* int int */
#define SQLITE_CONFIG_PCACHE 14 /* no-op */
#define SQLITE_CONFIG_GETPCACHE 15 /* no-op */
#define SQLITE_CONFIG_LOG 16 /* xFunc, void* */
#define SQLITE_CONFIG_URI 17 /* int */
#define SQLITE_CONFIG_PCACHE2 18 /* sqlite3_pcache_methods2* */
#define SQLITE_CONFIG_GETPCACHE2 19 /* sqlite3_pcache_methods2* */
#define SQLITE_CONFIG_COVERING_INDEX_SCAN 20 /* int */
#define SQLITE_CONFIG_SQLLOG 21 /* xSqllog, void* */
#define SQLITE_CONFIG_MMAP_SIZE 22 /* sqlite3_int64, sqlite3_int64 */
#define SQLITE_CONFIG_WIN32_HEAPSIZE 23 /* int nByte */
#define SQLITE_CONFIG_PCACHE_HDRSZ 24 /* int *psz */
#define SQLITE_CONFIG_PMASZ 25 /* unsigned int szPma */

/*
** CAPI3REF: Database Connection Configuration Options
**
** These constants are the available integer configuration options that
** can be passed as the second argument to the [sqlite3_db_config()] interface.
**
** New configuration options may be added in future releases of SQLite.
** Existing configuration options might be discontinued. Applications
** should check the return code from [sqlite3_db_config()] to make sure that
** the call worked. ^The [sqlite3_db_config()] interface will return a
** non-zero [error code] if a discontinued or unsupported configuration option
** is invoked.
**
** <dl>
** <dt>SQLITE_DBCONFIG_LOOKASIDE</dt>
** <dd> ^This option takes three additional arguments that determine the 
** [lookaside memory allocator] configuration for the [database connection].
** ^The first argument (the third parameter to [sqlite3_db_config()] is a
** pointer to a memory buffer to use for lookaside memory.
** ^The first argument after the SQLITE_DBCONFIG_LOOKASIDE verb
** may be NULL in which case SQLite will allocate the
** lookaside buffer itself using [sqlite3_malloc()]. ^The second argument is the
** size of each lookaside buffer slot. ^The third argument is the number of
** slots. The size of the buffer in the first argument must be greater than
** or equal to the product of the second and third arguments. The buffer
** must be aligned to an 8-byte boundary. ^If the second argument to
** SQLITE_DBCONFIG_LOOKASIDE is not a multiple of 8, it is internally
** rounded down to the next smaller multiple of 8. ^(The lookaside memory
** configuration for a database connection can only be changed when that
** connection is not currently using lookaside memory, or in other words
** when the "current value" returned by
** [sqlite3_db_status](D,[SQLITE_CONFIG_LOOKASIDE],...) is zero.
** Any attempt to change the lookaside memory configuration when lookaside
** memory is in use leaves the configuration unchanged and returns 
** [SQLITE_BUSY].)^</dd>
**
** <dt>SQLITE_DBCONFIG_ENABLE_FKEY</dt>
** <dd> ^This option is used to enable or disable the enforcement of
** [foreign key constraints]. There should be two additional arguments.
** The first argument is an integer which is 0 to disable FK enforcement,
** positive to enable FK enforcement or negative to leave FK enforcement
** unchanged. The second parameter is a pointer to an integer into which
** is written 0 or 1 to indicate whether FK enforcement is off or on
** following this call. The second parameter may be a NULL pointer, in
** which case the FK enforcement setting is not reported back. </dd>
**
** <dt>SQLITE_DBCONFIG_ENABLE_TRIGGER</dt>
** <dd> ^This option is used to enable or disable [CREATE TRIGGER | triggers].
** There should be two additional arguments.
** The first argument is an integer which is 0 to disable triggers,
** positive to enable triggers or negative to leave the setting unchanged.
** The second parameter is a pointer to an integer into which
** is written 0 or 1 to indicate whether triggers are disabled or enabled
** following this call. The second parameter may be a NULL pointer, in
** which case the trigger setting is not reported back. </dd>
**
** </dl>
*/
#define SQLITE_DBCONFIG_LOOKASIDE 1001 /* void* int int */
#define SQLITE_DBCONFIG_ENABLE_FKEY 1002 /* int int* */
#define SQLITE_DBCONFIG_ENABLE_TRIGGER 1003 /* int int* */

/*
** CAPI3REF: Enable Or Disable Extended Result Codes
** METHOD: sqlite3
**
** ^The sqlite3_extended_result_codes() routine enables or disables the
** [extended result codes] feature of SQLite. ^The extended result
** codes are disabled by default for historical compatibility.
*/
SQLITE_API int SQLITE_STDCALL sqlite3_extended_result_codes(sqlite3*, int onoff);

/*
** CAPI3REF: Last Insert Rowid
** METHOD: sqlite3
**
** ^Each entry in most SQLite tables (except for [WITHOUT ROWID] tables)
** has a unique 64-bit signed
** integer key called the [ROWID | "rowid"]. ^The rowid is always available
** as an undeclared column named ROWID, OID, or _ROWID_ as long as those
** names are not also used by explicitly declared columns. ^If
** the table has a column of type [INTEGER PRIMARY KEY] then that column
** is another alias for the rowid.
**
** ^The sqlite3_last_insert_rowid(D) interface returns the [rowid] of the 
** most recent successful [INSERT] into a rowid table or [virtual table]
** on database connection D.
** ^Inserts into [WITHOUT ROWID] tables are not recorded.
** ^If no successful [INSERT]s into rowid tables
** have ever occurred on the database connection D, 
** then sqlite3_last_insert_rowid(D) returns zero.
**
** ^(If an [INSERT] occurs within a trigger or within a [virtual table]
** method, then this routine will return the [rowid] of the inserted
** row as long as the trigger or virtual table method is running.
** But once the trigger or virtual table method ends, the value returned 
** by this routine reverts to what it was before the trigger or virtual
** table method began.)^
**
** ^An [INSERT] that fails due to a constraint violation is not a
** successful [INSERT] and does not change the value returned by this
** routine.  ^Thus INSERT OR FAIL, INSERT OR IGNORE, INSERT OR ROLLBACK,
** and INSERT OR ABORT make no changes to the return value of this
** routine when their insertion fails.  ^(When INSERT OR REPLACE
** encounters a constraint violation, it does not fail.  The
** INSERT continues to completion after deleting rows that caused
** the constraint problem so INSERT OR REPLACE will always change
** the return value of this interface.)^
**
** ^For the purposes of this routine, an [INSERT] is considered to
** be successful even if it is subsequently rolled back.
**
** This function is accessible to SQL statements via the
** [last_insert_rowid() SQL function].
**
** If a separate thread performs a new [INSERT] on the same
** database connection while the [sqlite3_last_insert_rowid()]
** function is running and thus changes the last insert [rowid],
** then the value returned by [sqlite3_last_insert_rowid()] is
** unpredictable and might not equal either the old or the new
** last insert [rowid].
*/
SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_last_insert_rowid(sqlite3*);

/*
** CAPI3REF: Count The Number Of Rows Modified
** METHOD: sqlite3
**
** ^This function returns the number of rows modified, inserted or
** deleted by the most recently completed INSERT, UPDATE or DELETE
** statement on the database connection specified by the only parameter.
** ^Executing any other type of SQL statement does not modify the value
** returned by this function.
**
** ^Only changes made directly by the INSERT, UPDATE or DELETE statement are
** considered - auxiliary changes caused by [CREATE TRIGGER | triggers], 
** [foreign key actions] or [REPLACE] constraint resolution are not counted.
** 
** Changes to a view that are intercepted by 
** [INSTEAD OF trigger | INSTEAD OF triggers] are not counted. ^The value 
** returned by sqlite3_changes() immediately after an INSERT, UPDATE or 
** DELETE statement run on a view is always zero. Only changes made to real 
** tables are counted.
**
** Things are more complicated if the sqlite3_changes() function is
** executed while a trigger program is running. This may happen if the
** program uses the [changes() SQL function], or if some other callback
** function invokes sqlite3_changes() directly. Essentially:
** 
** <ul>
** <li> ^(Before entering a trigger program the value returned by
** sqlite3_changes() function is saved. After the trigger program 
** has finished, the original value is restored.)^
** 
** <li> ^(Within a trigger program each INSERT, UPDATE and DELETE 
** statement sets the value returned by sqlite3_changes() 
** upon completion as normal. Of course, this value will not include 
** any changes performed by sub-triggers, as the sqlite3_changes() 
** value will be saved and restored after each sub-trigger has run.)^
** </ul>
** 
** ^This means that if the changes() SQL function (or similar) is used
** by the first INSERT, UPDATE or DELETE statement within a trigger, it 
** returns the value as set when the calling statement began executing.
** ^If it is used by the second or subsequent such statement within a trigger 
** program, the value returned reflects the number of rows modified by the 
** previous INSERT, UPDATE or DELETE statement within the same trigger.
**
** See also the [sqlite3_total_changes()] interface, the
** [count_changes pragma], and the [changes() SQL function].
**
** If a separate thread makes changes on the same database connection
** while [sqlite3_changes()] is running then the value returned
** is unpredictable and not meaningful.
*/
SQLITE_API int SQLITE_STDCALL sqlite3_changes(sqlite3*);

/*
** CAPI3REF: Total Number Of Rows Modified
** METHOD: sqlite3
**
** ^This function returns the total number of rows inserted, modified or
** deleted by all [INSERT], [UPDATE] or [DELETE] statements completed
** since the database connection was opened, including those executed as
** part of trigger programs. ^Executing any other type of SQL statement
** does not affect the value returned by sqlite3_total_changes().
** 
** ^Changes made as part of [foreign key actions] are included in the
** count, but those made as part of REPLACE constraint resolution are
** not. ^Changes to a view that are intercepted by INSTEAD OF triggers 
** are not counted.
** 
** See also the [sqlite3_changes()] interface, the
** [count_changes pragma], and the [total_changes() SQL function].
**
** If a separate thread makes changes on the same database connection
** while [sqlite3_total_changes()] is running then the value
** returned is unpredictable and not meaningful.
*/
SQLITE_API int SQLITE_STDCALL sqlite3_total_changes(sqlite3*);

/*
** CAPI3REF: Interrupt A Long-Running Query
** METHOD: sqlite3
**
** ^This function causes any pending database operation to abort and
** return at its earliest opportunity. This routine is typically
** called in response to a user action such as pressing "Cancel"
** or Ctrl-C where the user wants a long query operation to halt
** immediately.
**
** ^It is safe to call this routine from a thread different from the
** thread that is currently running the database operation.  But it
** is not safe to call this routine with a [database connection] that
** is closed or might close before sqlite3_interrupt() returns.
**
** ^If an SQL operation is very nearly finished at the time when
** sqlite3_interrupt() is called, then it might not have an opportunity
** to be interrupted and might continue to completion.
**
** ^An SQL operation that is interrupted will return [SQLITE_INTERRUPT].
** ^If the interrupted SQL operation is an INSERT, UPDATE, or DELETE
** that is inside an explicit transaction, then the entire transaction
** will be rolled back automatically.
**
** ^The sqlite3_interrupt(D) call is in effect until all currently running
** SQL statements on [database connection] D complete.  ^Any new SQL statements
** that are started after the sqlite3_interrupt() call and before the 
** running statements reaches zero are interrupted as if they had been
** running prior to the sqlite3_interrupt() call.  ^New SQL statements
** that are started after the running statement count reaches zero are
** not effected by the sqlite3_interrupt().
** ^A call to sqlite3_interrupt(D) that occurs when there are no running
** SQL statements is a no-op and has no effect on SQL statements
** that are started after the sqlite3_interrupt() call returns.
**
** If the database connection closes while [sqlite3_interrupt()]
** is running then bad things will likely happen.
*/
SQLITE_API void SQLITE_STDCALL sqlite3_interrupt(sqlite3*);

/*
** CAPI3REF: Determine If An SQL Statement Is Complete
**
** These routines are useful during command-line input to determine if the
** currently entered text seems to form a complete SQL statement or
** if additional input is needed before sending the text into
** SQLite for parsing.  ^These routines return 1 if the input string
** appears to be a complete SQL statement.  ^A statement is judged to be
** complete if it ends with a semicolon token and is not a prefix of a
** well-formed CREATE TRIGGER statement.  ^Semicolons that are embedded within
** string literals or quoted identifier names or comments are not
** independent tokens (they are part of the token in which they are
** embedded) and thus do not count as a statement terminator.  ^Whitespace
** and comments that follow the final semicolon are ignored.
**
** ^These routines return 0 if the statement is incomplete.  ^If a
** memory allocation fails, then SQLITE_NOMEM is returned.
**
** ^These routines do not parse the SQL statements thus
** will not detect syntactically incorrect SQL.
**
** ^(If SQLite has not been initialized using [sqlite3_initialize()] prior 
** to invoking sqlite3_complete16() then sqlite3_initialize() is invoked
** automatically by sqlite3_complete16().  If that initialization fails,
** then the return value from sqlite3_complete16() will be non-zero
** regardless of whether or not the input SQL is complete.)^
**
** The input to [sqlite3_complete()] must be a zero-terminated
** UTF-8 string.
**
** The input to [sqlite3_complete16()] must be a zero-terminated
** UTF-16 string in native byte order.
*/
SQLITE_API int SQLITE_STDCALL sqlite3_complete(const char *sql);
SQLITE_API int SQLITE_STDCALL sqlite3_complete16(const void *sql);

/*
** CAPI3REF: Register A Callback To Handle SQLITE_BUSY Errors
** KEYWORDS: {busy-handler callback} {busy handler}
** METHOD: sqlite3
**
** ^The sqlite3_busy_handler(D,X,P) routine sets a callback function X
** that might be invoked with argument P whenever
** an attempt is made to access a database table associated with
** [database connection] D when another thread
** or process has the table locked.
** The sqlite3_busy_handler() interface is used to implement
** [sqlite3_busy_timeout()] and [PRAGMA busy_timeout].
**
** ^If the busy callback is NULL, then [SQLITE_BUSY]
** is returned immediately upon encountering the lock.  ^If the busy callback
** is not NULL, then the callback might be invoked with two arguments.
**
** ^The first argument to the busy handler is a copy of the void* pointer which
** is the third argument to sqlite3_busy_handler().  ^The second argument to
** the busy handler callback is the number of times that the busy handler has
** been invoked previously for the same locking event.  ^If the
** busy callback returns 0, then no additional attempts are made to
** access the database and [SQLITE_BUSY] is returned
** to the application.
** ^If the callback returns non-zero, then another attempt
** is made to access the database and the cycle repeats.
**
** The presence of a busy handler does not guarantee that it will be invoked
** when there is lock contention. ^If SQLite determines that invoking the busy
** handler could result in a deadlock, it will go ahead and return [SQLITE_BUSY]
** to the application instead of invoking the 
** busy handler.
** Consider a scenario where one process is holding a read lock that
** it is trying to promote to a reserved lock and
** a second process is holding a reserved lock that it is trying
** to promote to an exclusive lock.  The first process cannot proceed
** because it is blocked by the second and the second process cannot
** proceed because it is blocked by the first.  If both processes
** invoke the busy handlers, neither will make any progress.  Therefore,
** SQLite returns [SQLITE_BUSY] for the first process, hoping that this
** will induce the first process to release its read lock and allow
** the second process to proceed.
**
** ^The default busy callback is NULL.
**
** ^(There can only be a single busy handler defined for each
** [database connection].  Setting a new busy handler clears any
** previously set handler.)^  ^Note that calling [sqlite3_busy_timeout()]
** or evaluating [PRAGMA busy_timeout=N] will change the
** busy handler and thus clear any previously set busy handler.
**
** The busy callback should not take any actions which modify the
** database connection that invoked the busy handler.  In other words,
** the busy handler is not reentrant.  Any such actions
** result in undefined behavior.
** 
** A busy handler must not close the database connection
** or [prepared statement] that invoked the busy handler.
*/
SQLITE_API int SQLITE_STDCALL sqlite3_busy_handler(sqlite3*, int(*)(void*,int), void*);

/*
** CAPI3REF: Set A Busy Timeout
** METHOD: sqlite3
**
** ^This routine sets a [sqlite3_busy_handler | busy handler] that sleeps
** for a specified amount of time when a table is locked.  ^The handler
** will sleep multiple times until at least "ms" milliseconds of sleeping
** have accumulated.  ^After at least "ms" milliseconds of sleeping,
** the handler returns 0 which causes [sqlite3_step()] to return
** [SQLITE_BUSY].
**
** ^Calling this routine with an argument less than or equal to zero
** turns off all busy handlers.
**
** ^(There can only be a single busy handler for a particular
** [database connection] at any given moment.  If another busy handler
** was defined  (using [sqlite3_busy_handler()]) prior to calling
** this routine, that other busy handler is cleared.)^
**
** See also:  [PRAGMA busy_timeout]
*/
SQLITE_API int SQLITE_STDCALL sqlite3_busy_timeout(sqlite3*, int ms);

/*
** CAPI3REF: Convenience Routines For Running Queries
** METHOD: sqlite3
**
** This is a legacy interface that is preserved for backwards compatibility.
** Use of this interface is not recommended.
**
** Definition: A result table is memory data structure created by the
** [sqlite3_get_table()] interface. A result table records the
** complete query results from one or more queries.
**
** The table conceptually has a number of rows and columns. But
** these numbers are not part of the result table itself. These
** numbers are obtained separately. Let N be the number of rows
** and M be the number of columns.
**
** A result table is an array of pointers to zero-terminated UTF-8 strings.
** There are (N+1)*M elements in the array. The first M pointers point
** to zero-terminated strings that contain the names of the columns.
** The remaining entries all point to query results. NULL values result
** in NULL pointers. All other values are in their UTF-8 zero-terminated
** string representation as returned by [sqlite3_column_text()].
**
** A result table might consist of one or more memory allocations.
** It is not safe to pass a result table directly to [sqlite3_free()].
** A result table should be deallocated using [sqlite3_free_table()].
**
** ^(As an example of the result table format, suppose a query result
** is as follows:
**
** <blockquote><pre>
** Name | Age
** -----------------------
** Alice | 43
** Bob | 28
** Cindy | 21
** </pre></blockquote>
**
** There are two column (M==2) and three rows (N==3). Thus the
** result table has 8 entries. Suppose the result table is stored
** in an array names azResult. Then azResult holds this content:
**
** <blockquote><pre>
** azResult&#91;0] = "Name";
** azResult&#91;1] = "Age";
** azResult&#91;2] = "Alice";
** azResult&#91;3] = "43";
** azResult&#91;4] = "Bob";
** azResult&#91;5] = "28";
** azResult&#91;6] = "Cindy";
** azResult&#91;7] = "21";
** </pre></blockquote>)^
**
** ^The sqlite3_get_table() function evaluates one or more
** semicolon-separated SQL statements in the zero-terminated UTF-8
** string of its 2nd parameter and returns a result table to the
** pointer given in its 3rd parameter.
**
** After the application has finished with the result from sqlite3_get_table(),
** it must pass the result table pointer to sqlite3_free_table() in order to
** release the memory that was malloced. Because of the way the
** [sqlite3_malloc()] happens within sqlite3_get_table(), the calling
** function must not try to call [sqlite3_free()] directly. Only
** [sqlite3_free_table()] is able to release the memory properly and safely.
**
** The sqlite3_get_table() interface is implemented as a wrapper around
** [sqlite3_exec()]. The sqlite3_get_table() routine does not have access
** to any internal data structures of SQLite. It uses only the public
** interface defined here. As a consequence, errors that occur in the
** wrapper layer outside of the internal [sqlite3_exec()] call are not
** reflected in subsequent calls to [sqlite3_errcode()] or
** [sqlite3_errmsg()].
*/
SQLITE_API int SQLITE_STDCALL sqlite3_get_table(
 sqlite3 *db, /* An open database */
 const char *zSql, /* SQL to be evaluated */
 char ***pazResult, /* Results of the query */
 int *pnRow, /* Number of result rows written here */
 int *pnColumn, /* Number of result columns written here */
 char **pzErrmsg /* Error msg written here */
);
SQLITE_API void SQLITE_STDCALL sqlite3_free_table(char **result);

/*
** CAPI3REF: Formatted String Printing Functions
**
** These routines are work-alikes of the "printf()" family of functions
** from the standard C library.
** These routines understand most of the common K&R formatting options,
** plus some additional non-standard formats, detailed below.
** Note that some of the more obscure formatting options from recent
** C-library standards are omitted from this implementation.
**
** ^The sqlite3_mprintf() and sqlite3_vmprintf() routines write their
** results into memory obtained from [sqlite3_malloc()].
** The strings returned by these two routines should be
** released by [sqlite3_free()]. ^Both routines return a
** NULL pointer if [sqlite3_malloc()] is unable to allocate enough
** memory to hold the resulting string.
**
** ^(The sqlite3_snprintf() routine is similar to "snprintf()" from
** the standard C library. The result is written into the
** buffer supplied as the second parameter whose size is given by
** the first parameter. Note that the order of the
** first two parameters is reversed from snprintf().)^ This is an
** historical accident that cannot be fixed without breaking
** backwards compatibility. ^(Note also that sqlite3_snprintf()
** returns a pointer to its buffer instead of the number of
** characters actually written into the buffer.)^ We admit that
** the number of characters written would be a more useful return
** value but we cannot change the implementation of sqlite3_snprintf()
** now without breaking compatibility.
**
** ^As long as the buffer size is greater than zero, sqlite3_snprintf()
** guarantees that the buffer is always zero-terminated. ^The first
** parameter "n" is the total size of the buffer, including space for
** the zero terminator. So the longest string that can be completely
** written will be n-1 characters.
**
** ^The sqlite3_vsnprintf() routine is a varargs version of sqlite3_snprintf().
**
** These routines all implement some additional formatting
** options that are useful for constructing SQL statements.
** All of the usual printf() formatting options apply. In addition, there
** is are "%q", "%Q", "%w" and "%z" options.
**
** ^(The %q option works like %s in that it substitutes a nul-terminated
** string from the argument list. But %q also doubles every '\'' character.
** %q is designed for use inside a string literal.)^ By doubling each '\''
** character it escapes that character and allows it to be inserted into
** the string.
**
** For example, assume the string variable zText contains text as follows:
**
** <blockquote><pre>
** char *zText = "It's a happy day!";
** </pre></blockquote>
**
** One can use this text in an SQL statement as follows:
**
** <blockquote><pre>
** char *zSQL = sqlite3_mprintf("INSERT INTO table VALUES('%q')", zText);
** sqlite3_exec(db, zSQL, 0, 0, 0);
** sqlite3_free(zSQL);
** </pre></blockquote>
**
** Because the %q format string is used, the '\'' character in zText
** is escaped and the SQL generated is as follows:
**
** <blockquote><pre>
** INSERT INTO table1 VALUES('It''s a happy day!')
** </pre></blockquote>
**
** This is correct. Had we used %s instead of %q, the generated SQL
** would have looked like this:
**
** <blockquote><pre>
** INSERT INTO table1 VALUES('It's a happy day!');
** </pre></blockquote>
**
** This second example is an SQL syntax error. As a general rule you should
** always use %q instead of %s when inserting text into a string literal.
**
** ^(The %Q option works like %q except it also adds single quotes around
** the outside of the total string. Additionally, if the parameter in the
** argument list is a NULL pointer, %Q substitutes the text "NULL" (without
** single quotes).)^ So, for example, one could say:
**
** <blockquote><pre>
** char *zSQL = sqlite3_mprintf("INSERT INTO table VALUES(%Q)", zText);
** sqlite3_exec(db, zSQL, 0, 0, 0);
** sqlite3_free(zSQL);
** </pre></blockquote>
**
** The code above will render a correct SQL statement in the zSQL
** variable even if the zText variable is a NULL pointer.
**
** ^(The "%w" formatting option is like "%q" except that it expects to
** be contained within double-quotes instead of single quotes, and it
** escapes the double-quote character instead of the single-quote
** character.)^ The "%w" formatting option is intended for safely inserting
** table and column names into a constructed SQL statement.
**
** ^(The "%z" formatting option works like "%s" but with the
** addition that after the string has been read and copied into
** the result, [sqlite3_free()] is called on the input string.)^
*/
SQLITE_API char *SQLITE_CDECL sqlite3_mprintf(const char*,...);
SQLITE_API char *SQLITE_STDCALL sqlite3_vmprintf(const char*, va_list);
SQLITE_API char *SQLITE_CDECL sqlite3_snprintf(int,char*,const char*, ...);
SQLITE_API char *SQLITE_STDCALL sqlite3_vsnprintf(int,char*,const char*, va_list);

/*
** CAPI3REF: Memory Allocation Subsystem
**
** The SQLite core uses these three routines for all of its own
** internal memory allocation needs. "Core" in the previous sentence
** does not include operating-system specific VFS implementation.  The
** Windows VFS uses native malloc() and free() for some operations.
**
** ^The sqlite3_malloc() routine returns a pointer to a block
** of memory at least N bytes in length, where N is the parameter.
** ^If sqlite3_malloc() is unable to obtain sufficient free
** memory, it returns a NULL pointer.  ^If the parameter N to
** sqlite3_malloc() is zero or negative then sqlite3_malloc() returns
** a NULL pointer.
**
** ^The sqlite3_malloc64(N) routine works just like
** sqlite3_malloc(N) except that N is an unsigned 64-bit integer instead
** of a signed 32-bit integer.
**
** ^Calling sqlite3_free() with a pointer previously returned
** by sqlite3_malloc() or sqlite3_realloc() releases that memory so
** that it might be reused.  ^The sqlite3_free() routine is
** a no-op if is called with a NULL pointer.  Passing a NULL pointer
** to sqlite3_free() is harmless.  After being freed, memory
** should neither be read nor written.  Even reading previously freed
** memory might result in a segmentation fault or other severe error.
** Memory corruption, a segmentation fault, or other severe error
** might result if sqlite3_free() is called with a non-NULL pointer that
** was not obtained from sqlite3_malloc() or sqlite3_realloc().
**
** ^The sqlite3_realloc(X,N) interface attempts to resize a
** prior memory allocation X to be at least N bytes.
** ^If the X parameter to sqlite3_realloc(X,N)
** is a NULL pointer then its behavior is identical to calling
** sqlite3_malloc(N).
** ^If the N parameter to sqlite3_realloc(X,N) is zero or
** negative then the behavior is exactly the same as calling
** sqlite3_free(X).
** ^sqlite3_realloc(X,N) returns a pointer to a memory allocation
** of at least N bytes in size or NULL if insufficient memory is available.
** ^If M is the size of the prior allocation, then min(N,M) bytes
** of the prior allocation are copied into the beginning of buffer returned
** by sqlite3_realloc(X,N) and the prior allocation is freed.
** ^If sqlite3_realloc(X,N) returns NULL and N is positive, then the
** prior allocation is not freed.
**
** ^The sqlite3_realloc64(X,N) interfaces works the same as
** sqlite3_realloc(X,N) except that N is a 64-bit unsigned integer instead
** of a 32-bit signed integer.
**
** ^If X is a memory allocation previously obtained from sqlite3_malloc(),
** sqlite3_malloc64(), sqlite3_realloc(), or sqlite3_realloc64(), then
** sqlite3_msize(X) returns the size of that memory allocation in bytes.
** ^The value returned by sqlite3_msize(X) might be larger than the number
** of bytes requested when X was allocated.  ^If X is a NULL pointer then
** sqlite3_msize(X) returns zero.  If X points to something that is not
** the beginning of memory allocation, or if it points to a formerly
** valid memory allocation that has now been freed, then the behavior
** of sqlite3_msize(X) is undefined and possibly harmful.
**
** ^The memory returned by sqlite3_malloc(), sqlite3_realloc(),
** sqlite3_malloc64(), and sqlite3_realloc64()
** is always aligned to at least an 8 byte boundary, or to a
** 4 byte boundary if the [SQLITE_4_BYTE_ALIGNED_MALLOC] compile-time
** option is used.
**
** In SQLite version 3.5.0 and 3.5.1, it was possible to define
** the SQLITE_OMIT_MEMORY_ALLOCATION which would cause the built-in
** implementation of these routines to be omitted.  That capability
** is no longer provided.  Only built-in memory allocators can be used.
**
** Prior to SQLite version 3.7.10, the Windows OS interface layer called
** the system malloc() and free() directly when converting
** filenames between the UTF-8 encoding used by SQLite
** and whatever filename encoding is used by the particular Windows
** installation.  Memory allocation errors were detected, but
** they were reported back as [SQLITE_CANTOPEN] or
** [SQLITE_IOERR] rather than [SQLITE_NOMEM].
**
** The pointer arguments to [sqlite3_free()] and [sqlite3_realloc()]
** must be either NULL or else pointers obtained from a prior
** invocation of [sqlite3_malloc()] or [sqlite3_realloc()] that have
** not yet been released.
**
** The application must not read or write any part of
** a block of memory after it has been released using
** [sqlite3_free()] or [sqlite3_realloc()].
*/
SQLITE_API void *SQLITE_STDCALL sqlite3_malloc(int);
SQLITE_API void *SQLITE_STDCALL sqlite3_malloc64(sqlite3_uint64);
SQLITE_API void *SQLITE_STDCALL sqlite3_realloc(void*, int);
SQLITE_API void *SQLITE_STDCALL sqlite3_realloc64(void*, sqlite3_uint64);
SQLITE_API void SQLITE_STDCALL sqlite3_free(void*);
SQLITE_API sqlite3_uint64 SQLITE_STDCALL sqlite3_msize(void*);

/*
** CAPI3REF: Memory Allocator Statistics
**
** SQLite provides these two interfaces for reporting on the status
** of the [sqlite3_malloc()], [sqlite3_free()], and [sqlite3_realloc()]
** routines, which form the built-in memory allocation subsystem.
**
** ^The [sqlite3_memory_used()] routine returns the number of bytes
** of memory currently outstanding (malloced but not freed).
** ^The [sqlite3_memory_highwater()] routine returns the maximum
** value of [sqlite3_memory_used()] since the high-water mark
** was last reset.  ^The values returned by [sqlite3_memory_used()] and
** [sqlite3_memory_highwater()] include any overhead
** added by SQLite in its implementation of [sqlite3_malloc()],
** but not overhead added by the any underlying system library
** routines that [sqlite3_malloc()] may call.
**
** ^The memory high-water mark is reset to the current value of
** [sqlite3_memory_used()] if and only if the parameter to
** [sqlite3_memory_highwater()] is true.  ^The value returned
** by [sqlite3_memory_highwater(1)] is the high-water mark
** prior to the reset.
*/
SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_memory_used(void);
SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_memory_highwater(int resetFlag);

/*
** CAPI3REF: Pseudo-Random Number Generator
**
** SQLite contains a high-quality pseudo-random number generator (PRNG) used to
** select random [ROWID | ROWIDs] when inserting new records into a table that
** already uses the largest possible [ROWID].  The PRNG is also used for
** the build-in random() and randomblob() SQL functions.  This interface allows
** applications to access the same PRNG for other purposes.
**
** ^A call to this routine stores N bytes of randomness into buffer P.
** ^The P parameter can be a NULL pointer.
**
** ^If this routine has not been previously called or if the previous
** call had N less than one or a NULL pointer for P, then the PRNG is
** seeded using randomness obtained from the xRandomness method of
** the default [sqlite3_vfs] object.
** ^If the previous call to this routine had an N of 1 or more and a
** non-NULL P then the pseudo-randomness is generated
** internally and without recourse to the [sqlite3_vfs] xRandomness
** method.
*/
SQLITE_API void SQLITE_STDCALL sqlite3_randomness(int N, void *P);

/*
** CAPI3REF: Compile-Time Authorization Callbacks
** METHOD: sqlite3
**
** ^This routine registers an authorizer callback with a particular
** [database connection], supplied in the first argument.
** ^The authorizer callback is invoked as SQL statements are being compiled
** by [sqlite3_prepare()] or its variants [sqlite3_prepare_v2()],
** [sqlite3_prepare16()] and [sqlite3_prepare16_v2()].  ^At various
** points during the compilation process, as logic is being created
** to perform various actions, the authorizer callback is invoked to
** see if those actions are allowed.  ^The authorizer callback should
** return [SQLITE_OK] to allow the action, [SQLITE_IGNORE] to disallow the
** specific action but allow the SQL statement to continue to be
** compiled, or [SQLITE_DENY] to cause the entire SQL statement to be
** rejected with an error.  ^If the authorizer callback returns
** any value other than [SQLITE_IGNORE], [SQLITE_OK], or [SQLITE_DENY]
** then the [sqlite3_prepare_v2()] or equivalent call that triggered
** the authorizer will fail with an error message.
**
** When the callback returns [SQLITE_OK], that means the operation
** requested is ok.  ^When the callback returns [SQLITE_DENY], the
** [sqlite3_prepare_v2()] or equivalent call that triggered the
** authorizer will fail with an error message explaining that
** access is denied. 
**
** ^The first parameter to the authorizer callback is a copy of the third
** parameter to the sqlite3_set_authorizer() interface. ^The second parameter
** to the callback is an integer [SQLITE_COPY | action code] that specifies
** the particular action to be authorized. ^The third through sixth parameters
** to the callback are zero-terminated strings that contain additional
** details about the action to be authorized.
**
** ^If the action code is [SQLITE_READ]
** and the callback returns [SQLITE_IGNORE] then the
** [prepared statement] statement is constructed to substitute
** a NULL value in place of the table column that would have
** been read if [SQLITE_OK] had been returned.  The [SQLITE_IGNORE]
** return can be used to deny an untrusted user access to individual
** columns of a table.
** ^If the action code is [SQLITE_DELETE] and the callback returns
** [SQLITE_IGNORE] then the [DELETE] operation proceeds but the
** [truncate optimization] is disabled and all rows are deleted individually.
**
** An authorizer is used when [sqlite3_prepare | preparing]
** SQL statements from an untrusted source, to ensure that the SQL statements
** do not try to access data they are not allowed to see, or that they do not
** try to execute malicious statements that damage the database.  For
** example, an application may allow a user to enter arbitrary
** SQL queries for evaluation by a database.  But the application does
** not want the user to be able to make arbitrary changes to the
** database.  An authorizer could then be put in place while the
** user-entered SQL is being [sqlite3_prepare | prepared] that
** disallows everything except [SELECT] statements.
**
** Applications that need to process SQL from untrusted sources
** might also consider lowering resource limits using [sqlite3_limit()]
** and limiting database size using the [max_page_count] [PRAGMA]
** in addition to using an authorizer.
**
** ^(Only a single authorizer can be in place on a database connection
** at a time.  Each call to sqlite3_set_authorizer overrides the
** previous call.)^  ^Disable the authorizer by installing a NULL callback.
** The authorizer is disabled by default.
**
** The authorizer callback must not do anything that will modify
** the database connection that invoked the authorizer callback.
** Note that [sqlite3_prepare_v2()] and [sqlite3_step()] both modify their
** database connections for the meaning of "modify" in this paragraph.
**
** ^When [sqlite3_prepare_v2()] is used to prepare a statement, the
** statement might be re-prepared during [sqlite3_step()] due to a 
** schema change.  Hence, the application should ensure that the
** correct authorizer callback remains in place during the [sqlite3_step()].
**
** ^Note that the authorizer callback is invoked only during
** [sqlite3_prepare()] or its variants.  Authorization is not
** performed during statement evaluation in [sqlite3_step()], unless
** as stated in the previous paragraph, sqlite3_step() invokes
** sqlite3_prepare_v2() to reprepare a statement after a schema change.
*/
SQLITE_API int SQLITE_STDCALL sqlite3_set_authorizer(
  sqlite3*,
  int (*xAuth)(void*,int,const char*,const char*,const char*,const char*),
  void *pUserData
);

/*
** CAPI3REF: Authorizer Return Codes
**
** The [sqlite3_set_authorizer | authorizer callback function] must
** return either [SQLITE_OK] or one of these two constants in order
** to signal SQLite whether or not the action is permitted.  See the
** [sqlite3_set_authorizer | authorizer documentation] for additional
** information.
**
** Note that SQLITE_IGNORE is also used as a [conflict resolution mode]
** returned from the [sqlite3_vtab_on_conflict()] interface.
*/
#define SQLITE_DENY   1   /* Abort the SQL statement with an error */
#define SQLITE_IGNORE 2   /* Don't allow access, but don't generate an error */

/*
** CAPI3REF: Authorizer Action Codes
**
** The [sqlite3_set_authorizer()] interface registers a callback function
** that is invoked to authorize certain SQL statement actions.  The
** second parameter to the callback is an integer code that specifies
** what action is being authorized.  These are the integer action codes that
** the authorizer callback may be passed.
**
** These action code values signify what kind of operation is to be
** authorized.  The 3rd and 4th parameters to the authorization
** callback function will be parameters or NULL depending on which of these
** codes is used as the second parameter.  ^(The 5th parameter to the
** authorizer callback is the name of the database ("main", "temp",
** etc.) if applicable.)^  ^The 6th parameter to the authorizer callback
** is the name of the inner-most trigger or view that is responsible for
** the access attempt or NULL if this access attempt is directly from
** top-level SQL code.
*/
/******************************************* 3rd ************ 4th ***********/
#define SQLITE_CREATE_INDEX          1   /* Index Name      Table Name      */
#define SQLITE_CREATE_TABLE          2   /* Table Name      NULL            */
#define SQLITE_CREATE_TEMP_INDEX     3   /* Index Name      Table Name      */
#define SQLITE_CREATE_TEMP_TABLE     4   /* Table Name      NULL            */
#define SQLITE_CREATE_TEMP_TRIGGER   5   /* Trigger Name    Table Name      */
#define SQLITE_CREATE_TEMP_VIEW      6   /* View Name       NULL            */
#define SQLITE_CREATE_TRIGGER        7   /* Trigger Name    Table Name      */
#define SQLITE_CREATE_VIEW           8   /* View Name       NULL            */
#define SQLITE_DELETE                9   /* Table Name      NULL            */
#define SQLITE_DROP_INDEX           10   /* Index Name      Table Name      */
#define SQLITE_DROP_TABLE           11   /* Table Name      NULL            */
#define SQLITE_DROP_TEMP_INDEX      12   /* Index Name      Table Name      */
#define SQLITE_DROP_TEMP_TABLE      13   /* Table Name      NULL            */
#define SQLITE_DROP_TEMP_TRIGGER    14   /* Trigger Name    Table Name      */
#define SQLITE_DROP_TEMP_VIEW       15   /* View Name       NULL            */
#define SQLITE_DROP_TRIGGER         16   /* Trigger Name    Table Name      */
#define SQLITE_DROP_VIEW            17   /* View Name       NULL            */
#define SQLITE_INSERT               18   /* Table Name      NULL            */
#define SQLITE_PRAGMA               19   /* Pragma Name     1st arg or NULL */
#define SQLITE_READ                 20   /* Table Name      Column Name     */
#define SQLITE_SELECT               21   /* NULL            NULL            */
#define SQLITE_TRANSACTION          22   /* Operation       NULL            */
#define SQLITE_UPDATE               23   /* Table Name      Column Name     */
#define SQLITE_ATTACH               24   /* Filename        NULL            */
#define SQLITE_DETACH               25   /* Database Name   NULL            */
#define SQLITE_ALTER_TABLE          26   /* Database Name   Table Name      */
#define SQLITE_REINDEX              27   /* Index Name      NULL            */
#define SQLITE_ANALYZE              28   /* Table Name      NULL            */
#define SQLITE_CREATE_VTABLE        29   /* Table Name      Module Name     */
#define SQLITE_DROP_VTABLE          30   /* Table Name      Module Name     */
#define SQLITE_FUNCTION             31   /* NULL            Function Name   */
#define SQLITE_SAVEPOINT            32   /* Operation       Savepoint Name  */
#define SQLITE_COPY                  0   /* No longer used */
#define SQLITE_RECURSIVE            33   /* NULL            NULL            */

/*
** CAPI3REF: Tracing And Profiling Functions
** METHOD: sqlite3
**
** These routines register callback functions that can be used for
** tracing and profiling the execution of SQL statements.
**
** ^The callback function registered by sqlite3_trace() is invoked at
** various times when an SQL statement is being run by [sqlite3_step()].
** ^The sqlite3_trace() callback is invoked with a UTF-8 rendering of the
** SQL statement text as the statement first begins executing.
** ^(Additional sqlite3_trace() callbacks might occur
** as each triggered subprogram is entered.  The callbacks for triggers
** contain a UTF-8 SQL comment that identifies the trigger.)^
**
** The [SQLITE_TRACE_SIZE_LIMIT] compile-time option can be used to limit
** the length of [bound parameter] expansion in the output of sqlite3_trace().
**
** ^The callback function registered by sqlite3_profile() is invoked
** as each SQL statement finishes.  ^The profile callback contains
** the original statement text and an estimate of wall-clock time
** of how long that statement took to run.  ^The profile callback
** time is in units of nanoseconds, however the current implementation
** is only capable of millisecond resolution so the six least significant
** digits in the time are meaningless.  Future versions of SQLite
** might provide greater resolution on the profiler callback.  The
** sqlite3_profile() function is considered experimental and is
** subject to change in future versions of SQLite.
*/
SQLITE_API void *SQLITE_STDCALL sqlite3_trace(sqlite3*, void(*xTrace)(void*,const char*), void*);
SQLITE_API SQLITE_EXPERIMENTAL void *SQLITE_STDCALL sqlite3_profile(sqlite3*,
   void(*xProfile)(void*,const char*,sqlite3_uint64), void*);

/*
** CAPI3REF: Query Progress Callbacks
** METHOD: sqlite3
**
** ^The sqlite3_progress_handler(D,N,X,P) interface causes the callback
** function X to be invoked periodically during long running calls to
** [sqlite3_exec()], [sqlite3_step()] and [sqlite3_get_table()] for
** database connection D.  An example use for this
** interface is to keep a GUI updated during a large query.
**
** ^The parameter P is passed through as the only parameter to the 
** callback function X.  ^The parameter N is the approximate number of 
** [virtual machine instructions] that are evaluated between successive
** invocations of the callback X.  ^If N is less than one then the progress
** handler is disabled.
**
** ^Only a single progress handler may be defined at one time per
** [database connection]; setting a new progress handler cancels the
** old one.  ^Setting parameter X to NULL disables the progress handler.
** ^The progress handler is also disabled by setting N to a value less
** than 1.
**
** ^If the progress callback returns non-zero, the operation is
** interrupted.  This feature can be used to implement a
** "Cancel" button on a GUI progress dialog box.
**
** The progress handler callback must not do anything that will modify
** the database connection that invoked the progress handler.
** Note that [sqlite3_prepare_v2()] and [sqlite3_step()] both modify their
** database connections for the meaning of "modify" in this paragraph.
**
*/
SQLITE_API void SQLITE_STDCALL sqlite3_progress_handler(sqlite3*, int, int(*)(void*), void*);

/*
** CAPI3REF: Opening A New Database Connection
** CONSTRUCTOR: sqlite3
**
** ^These routines open an SQLite database file as specified by the 
** filename argument. ^The filename argument is interpreted as UTF-8 for
** sqlite3_open() and sqlite3_open_v2() and as UTF-16 in the native byte
** order for sqlite3_open16(). ^(A [database connection] handle is usually
** returned in *ppDb, even if an error occurs. The only exception is that
** if SQLite is unable to allocate memory to hold the [sqlite3] object,
** a NULL will be written into *ppDb instead of a pointer to the [sqlite3]
** object.)^ ^(If the database is opened (and/or created) successfully, then
** [SQLITE_OK] is returned. Otherwise an [error code] is returned.)^ ^The
** [sqlite3_errmsg()] or [sqlite3_errmsg16()] routines can be used to obtain
** an English language description of the error following a failure of any
** of the sqlite3_open() routines.
**
** ^The default encoding will be UTF-8 for databases created using
** sqlite3_open() or sqlite3_open_v2(). ^The default encoding for databases
** created using sqlite3_open16() will be UTF-16 in the native byte order.
**
** Whether or not an error occurs when it is opened, resources
** associated with the [database connection] handle should be released by
** passing it to [sqlite3_close()] when it is no longer required.
**
** The sqlite3_open_v2() interface works like sqlite3_open()
** except that it accepts two additional parameters for additional control
** over the new database connection. ^(The flags parameter to
** sqlite3_open_v2() can take one of
** the following three values, optionally combined with the 
** [SQLITE_OPEN_NOMUTEX], [SQLITE_OPEN_FULLMUTEX], [SQLITE_OPEN_SHAREDCACHE],
** [SQLITE_OPEN_PRIVATECACHE], and/or [SQLITE_OPEN_URI] flags:)^
**
** <dl>
** ^(<dt>[SQLITE_OPEN_READONLY]</dt>
** <dd>The database is opened in read-only mode. If the database does not
** already exist, an error is returned.</dd>)^
**
** ^(<dt>[SQLITE_OPEN_READWRITE]</dt>
** <dd>The database is opened for reading and writing if possible, or reading
** only if the file is write protected by the operating system. In either
** case the database must already exist, otherwise an error is returned.</dd>)^
**
** ^(<dt>[SQLITE_OPEN_READWRITE] | [SQLITE_OPEN_CREATE]</dt>
** <dd>The database is opened for reading and writing, and is created if
** it does not already exist. This is the behavior that is always used for
** sqlite3_open() and sqlite3_open16().</dd>)^
** </dl>
**
** If the 3rd parameter to sqlite3_open_v2() is not one of the
** combinations shown above optionally combined with other
** [SQLITE_OPEN_READONLY | SQLITE_OPEN_* bits]
** then the behavior is undefined.
**
** ^If the [SQLITE_OPEN_NOMUTEX] flag is set, then the database connection
** opens in the multi-thread [threading mode] as long as the single-thread
** mode has not been set at compile-time or start-time. ^If the
** [SQLITE_OPEN_FULLMUTEX] flag is set then the database connection opens
** in the serialized [threading mode] unless single-thread was
** previously selected at compile-time or start-time.
** ^The [SQLITE_OPEN_SHAREDCACHE] flag causes the database connection to be
** eligible to use [shared cache mode], regardless of whether or not shared
** cache is enabled using [sqlite3_enable_shared_cache()]. ^The
** [SQLITE_OPEN_PRIVATECACHE] flag causes the database connection to not
** participate in [shared cache mode] even if it is enabled.
**
** ^The fourth parameter to sqlite3_open_v2() is the name of the
** [sqlite3_vfs] object that defines the operating system interface that
** the new database connection should use. ^If the fourth parameter is
** a NULL pointer then the default [sqlite3_vfs] object is used.
**
** ^If the filename is ":memory:", then a private, temporary in-memory database
** is created for the connection. ^This in-memory database will vanish when
** the database connection is closed. Future versions of SQLite might
** make use of additional special filenames that begin with the ":" character.
** It is recommended that when a database filename actually does begin with
** a ":" character you should prefix the filename with a pathname such as
** "./" to avoid ambiguity.
**
** ^If the filename is an empty string, then a private, temporary
** on-disk database will be created. ^This private database will be
** automatically deleted as soon as the database connection is closed.
**
** [[URI filenames in sqlite3_open()]] <h3>URI Filenames</h3>
**
** ^If [URI filename] interpretation is enabled, and the filename argument
** begins with "file:", then the filename is interpreted as a URI. ^URI
** filename interpretation is enabled if the [SQLITE_OPEN_URI] flag is
** set in the fourth argument to sqlite3_open_v2(), or if it has
** been enabled globally using the [SQLITE_CONFIG_URI] option with the
** [sqlite3_config()] method or by the [SQLITE_USE_URI] compile-time option.
** As of SQLite version 3.7.7, URI filename interpretation is turned off
** by default, but future releases of SQLite might enable URI filename
** interpretation by default. See "[URI filenames]" for additional
** information.
**
** URI filenames are parsed according to RFC 3986. ^If the URI contains an
** authority, then it must be either an empty string or the string 
** "localhost". ^If the authority is not an empty string or "localhost", an 
** error is returned to the caller. ^The fragment component of a URI, if 
** present, is ignored.
**
** ^SQLite uses the path component of the URI as the name of the disk file
** which contains the database. ^If the path begins with a '/' character, 
** then it is interpreted as an absolute path. ^If the path does not begin 
** with a '/' (meaning that the authority section is omitted from the URI)
** then the path is interpreted as a relative path. 
** ^(On windows, the first component of an absolute path 
** is a drive specification (e.g. "C:").)^
**
** [[core URI query parameters]]
** The query component of a URI may contain parameters that are interpreted
** either by SQLite itself, or by a [VFS | custom VFS implementation].
** SQLite and its built-in [VFSes] interpret the
** following query parameters:
**
** <ul>
** <li> vfs: ^The "vfs" parameter may be used to specify the name of
** a VFS object that provides the operating system interface that should
** be used to access the database file on disk. ^If this option is set to
** an empty string the default VFS object is used. ^Specifying an unknown
** VFS is an error. ^If sqlite3_open_v2() is used and the vfs option is
** present, then the VFS specified by the option takes precedence over
** the value passed as the fourth parameter to sqlite3_open_v2().
**
** <li> mode: ^(The mode parameter may be set to either "ro", "rw",
** "rwc", or "memory". Attempting to set it to any other value is
** an error)^. 
** ^If "ro" is specified, then the database is opened for read-only 
** access, just as if the [SQLITE_OPEN_READONLY] flag had been set in the 
** third argument to sqlite3_open_v2(). ^If the mode option is set to 
** "rw", then the database is opened for read-write (but not create) 
** access, as if SQLITE_OPEN_READWRITE (but not SQLITE_OPEN_CREATE) had 
** been set. ^Value "rwc" is equivalent to setting both 
** SQLITE_OPEN_READWRITE and SQLITE_OPEN_CREATE. ^If the mode option is
** set to "memory" then a pure [in-memory database] that never reads
** or writes from disk is used. ^It is an error to specify a value for
** the mode parameter that is less restrictive than that specified by
** the flags passed in the third parameter to sqlite3_open_v2().
**
** <li> cache: ^The cache parameter may be set to either "shared" or
** "private". ^Setting it to "shared" is equivalent to setting the
** SQLITE_OPEN_SHAREDCACHE bit in the flags argument passed to
** sqlite3_open_v2(). ^Setting the cache parameter to "private" is 
** equivalent to setting the SQLITE_OPEN_PRIVATECACHE bit.
** ^If sqlite3_open_v2() is used and the "cache" parameter is present in
** a URI filename, its value overrides any behavior requested by setting
** SQLITE_OPEN_PRIVATECACHE or SQLITE_OPEN_SHAREDCACHE flag.
**
** <li> psow: ^The psow parameter indicates whether or not the
** [powersafe overwrite] property does or does not apply to the
** storage media on which the database file resides.
**
** <li> nolock: ^The nolock parameter is a boolean query parameter
** which if set disables file locking in rollback journal modes. This
** is useful for accessing a database on a filesystem that does not
** support locking. Caution: Database corruption might result if two
** or more processes write to the same database and any one of those
** processes uses nolock=1.
**
** <li> immutable: ^The immutable parameter is a boolean query
** parameter that indicates that the database file is stored on
** read-only media. ^When immutable is set, SQLite assumes that the
** database file cannot be changed, even by a process with higher
** privilege, and so the database is opened read-only and all locking
** and change detection is disabled. Caution: Setting the immutable
** property on a database file that does in fact change can result
** in incorrect query results and/or [SQLITE_CORRUPT] errors.
** See also: [SQLITE_IOCAP_IMMUTABLE].
** 
** </ul>
**
** ^Specifying an unknown parameter in the query component of a URI is not an
** error. Future versions of SQLite might understand additional query
** parameters. See "[query parameters with special meaning to SQLite]" for
** additional information.
**
** [[URI filename examples]] <h3>URI filename examples</h3>
**
** <table border="1" align=center cellpadding=5>
** <tr><th> URI filenames <th> Results
** <tr><td> file:data.db <td> 
** Open the file "data.db" in the current directory.
** <tr><td> file:/home/fred/data.db 
** file:///home/fred/data.db 
** file://localhost/home/fred/data.db <td> 
** Open the database file "/home/fred/data.db".
** <tr><td> file://darkstar/home/fred/data.db <td> 
** An error. "darkstar" is not a recognized authority.
** <tr><td style="white-space:nowrap"> 
** file:///C:/Documents%20and%20Settings/fred/Desktop/data.db
** <td> Windows only: Open the file "data.db" on fred's desktop on drive
** C:. Note that the %20 escaping in this example is not strictly 
** necessary - space characters can be used literally
** in URI filenames.
** <tr><td> file:data.db?mode=ro&cache=private <td> 
** Open file "data.db" in the current directory for read-only access.
** Regardless of whether or not shared-cache mode is enabled by
** default, use a private cache.
** <tr><td> file:/home/fred/data.db?vfs=unix-dotfile <td>
** Open file "/home/fred/data.db". Use the special VFS "unix-dotfile"
** that uses dot-files in place of posix advisory locking.
** <tr><td> file:data.db?mode=readonly <td> 
** An error. "readonly" is not a valid option for the "mode" parameter.
** </table>
**
** ^URI hexadecimal escape sequences (%HH) are supported within the path and
** query components of a URI. A hexadecimal escape sequence consists of a
** percent sign - "%" - followed by exactly two hexadecimal digits 
** specifying an octet value. ^Before the path or query components of a
** URI filename are interpreted, they are encoded using UTF-8 and all 
** hexadecimal escape sequences replaced by a single byte containing the
** corresponding octet. If this process generates an invalid UTF-8 encoding,
** the results are undefined.
**
** Note to Windows users: The encoding used for the filename argument
** of sqlite3_open() and sqlite3_open_v2() must be UTF-8, not whatever
** codepage is currently defined. Filenames containing international
** characters must be converted to UTF-8 prior to passing them into
** sqlite3_open() or sqlite3_open_v2().
**
** Note to Windows Runtime users: The temporary directory must be set
** prior to calling sqlite3_open() or sqlite3_open_v2(). Otherwise, various
** features that require the use of temporary files may fail.
**
** See also: [sqlite3_temp_directory]
*/
SQLITE_API int SQLITE_STDCALL sqlite3_open(
 const char *filename, /* Database filename (UTF-8) */
 sqlite3 **ppDb /* OUT: SQLite db handle */
);
SQLITE_API int SQLITE_STDCALL sqlite3_open16(
 const void *filename, /* Database filename (UTF-16) */
 sqlite3 **ppDb /* OUT: SQLite db handle */
);
SQLITE_API int SQLITE_STDCALL sqlite3_open_v2(
 const char *filename, /* Database filename (UTF-8) */
 sqlite3 **ppDb, /* OUT: SQLite db handle */
 int flags, /* Flags */
 const char *zVfs /* Name of VFS module to use */
);

/*
** CAPI3REF: Obtain Values For URI Parameters
**
** These are utility routines, useful to VFS implementations, that check
** to see if a database file was a URI that contained a specific query 
** parameter, and if so obtains the value of that query parameter.
**
** If F is the database filename pointer passed into the xOpen() method of 
** a VFS implementation when the flags parameter to xOpen() has one or 
** more of the [SQLITE_OPEN_URI] or [SQLITE_OPEN_MAIN_DB] bits set and
** P is the name of the query parameter, then
** sqlite3_uri_parameter(F,P) returns the value of the P
** parameter if it exists or a NULL pointer if P does not appear as a 
** query parameter on F.  If P is a query parameter of F
** has no explicit value, then sqlite3_uri_parameter(F,P) returns
** a pointer to an empty string.
**
** The sqlite3_uri_boolean(F,P,B) routine assumes that P is a boolean
** parameter and returns true (1) or false (0) according to the value
** of P.  The sqlite3_uri_boolean(F,P,B) routine returns true (1) if the
** value of query parameter P is one of "yes", "true", or "on" in any
** case or if the value begins with a non-zero number.  The 
** sqlite3_uri_boolean(F,P,B) routines returns false (0) if the value of
** query parameter P is one of "no", "false", or "off" in any case or
** if the value begins with a numeric zero.  If P is not a query
** parameter on F or if the value of P is does not match any of the
** above, then sqlite3_uri_boolean(F,P,B) returns (B!=0).
**
** The sqlite3_uri_int64(F,P,D) routine converts the value of P into a
** 64-bit signed integer and returns that integer, or D if P does not
** exist.  If the value of P is something other than an integer, then
** zero is returned.
** 
** If F is a NULL pointer, then sqlite3_uri_parameter(F,P) returns NULL and
** sqlite3_uri_boolean(F,P,B) returns B.  If F is not a NULL pointer and
** is not a database file pathname pointer that SQLite passed into the xOpen
** VFS method, then the behavior of this routine is undefined and probably
** undesirable.
*/
SQLITE_API const char *SQLITE_STDCALL sqlite3_uri_parameter(const char *zFilename, const char *zParam);
SQLITE_API int SQLITE_STDCALL sqlite3_uri_boolean(const char *zFile, const char *zParam, int bDefault);
SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_uri_int64(const char*, const char*, sqlite3_int64);

/*
** CAPI3REF: Error Codes And Messages
** METHOD: sqlite3
**
** ^If the most recent sqlite3_* API call associated with 
** [database connection] D failed, then the sqlite3_errcode(D) interface
** returns the numeric [result code] or [extended result code] for that
** API call.
** If the most recent API call was successful,
** then the return value from sqlite3_errcode() is undefined.
** ^The sqlite3_extended_errcode()
** interface is the same except that it always returns the 
** [extended result code] even when extended result codes are
** disabled.
**
** ^The sqlite3_errmsg() and sqlite3_errmsg16() return English-language
** text that describes the error, as either UTF-8 or UTF-16 respectively.
** ^(Memory to hold the error message string is managed internally.
** The application does not need to worry about freeing the result.
** However, the error string might be overwritten or deallocated by
** subsequent calls to other SQLite interface functions.)^
**
** ^The sqlite3_errstr() interface returns the English-language text
** that describes the [result code], as UTF-8.
** ^(Memory to hold the error message string is managed internally
** and must not be freed by the application)^.
**
** When the serialized [threading mode] is in use, it might be the
** case that a second error occurs on a separate thread in between
** the time of the first error and the call to these interfaces.
** When that happens, the second error will be reported since these
** interfaces always report the most recent result.  To avoid
** this, each thread can obtain exclusive use of the [database connection] D
** by invoking [sqlite3_mutex_enter]([sqlite3_db_mutex](D)) before beginning
** to use D and invoking [sqlite3_mutex_leave]([sqlite3_db_mutex](D)) after
** all calls to the interfaces listed here are completed.
**
** If an interface fails with SQLITE_MISUSE, that means the interface
** was invoked incorrectly by the application.  In that case, the
** error code and message may or may not be set.
*/
SQLITE_API int SQLITE_STDCALL sqlite3_errcode(sqlite3 *db);
SQLITE_API int SQLITE_STDCALL sqlite3_extended_errcode(sqlite3 *db);
SQLITE_API const char *SQLITE_STDCALL sqlite3_errmsg(sqlite3*);
SQLITE_API const void *SQLITE_STDCALL sqlite3_errmsg16(sqlite3*);
SQLITE_API const char *SQLITE_STDCALL sqlite3_errstr(int);

/*
** CAPI3REF: Prepared Statement Object
** KEYWORDS: {prepared statement} {prepared statements}
**
** An instance of this object represents a single SQL statement that
** has been compiled into binary form and is ready to be evaluated.
**
** Think of each SQL statement as a separate computer program. The
** original SQL text is source code. A prepared statement object 
** is the compiled object code. All SQL must be converted into a
** prepared statement before it can be run.
**
** The life-cycle of a prepared statement object usually goes like this:
**
** <ol>
** <li> Create the prepared statement object using [sqlite3_prepare_v2()].
** <li> Bind values to [parameters] using the sqlite3_bind_*()
** interfaces.
** <li> Run the SQL by calling [sqlite3_step()] one or more times.
** <li> Reset the prepared statement using [sqlite3_reset()] then go back
** to step 2. Do this zero or more times.
** <li> Destroy the object using [sqlite3_finalize()].
** </ol>
*/
typedef struct sqlite3_stmt sqlite3_stmt;

/*
** CAPI3REF: Run-time Limits
** METHOD: sqlite3
**
** ^(This interface allows the size of various constructs to be limited
** on a connection by connection basis. The first parameter is the
** [database connection] whose limit is to be set or queried. The
** second parameter is one of the [limit categories] that define a
** class of constructs to be size limited. The third parameter is the
** new limit for that construct.)^
**
** ^If the new limit is a negative number, the limit is unchanged.
** ^(For each limit category SQLITE_LIMIT_NAME there is a 
** [limits | hard upper bound]
** set at compile-time by a C preprocessor macro called
** [limits | SQLITE_MAX_NAME].
** (The "_LIMIT_" in the name is changed to "_MAX_".))^
** ^Attempts to increase a limit above its hard upper bound are
** silently truncated to the hard upper bound.
**
** ^Regardless of whether or not the limit was changed, the 
** [sqlite3_limit()] interface returns the prior value of the limit.
** ^Hence, to find the current value of a limit without changing it,
** simply invoke this interface with the third parameter set to -1.
**
** Run-time limits are intended for use in applications that manage
** both their own internal database and also databases that are controlled
** by untrusted external sources. An example application might be a
** web browser that has its own databases for storing history and
** separate databases controlled by JavaScript applications downloaded
** off the Internet. The internal databases can be given the
** large, default limits. Databases managed by external sources can
** be given much smaller limits designed to prevent a denial of service
** attack. Developers might also want to use the [sqlite3_set_authorizer()]
** interface to further control untrusted SQL. The size of the database
** created by an untrusted script can be contained using the
** [max_page_count] [PRAGMA].
**
** New run-time limit categories may be added in future releases.
*/
SQLITE_API int SQLITE_STDCALL sqlite3_limit(sqlite3*, int id, int newVal);

/*
** CAPI3REF: Run-Time Limit Categories
** KEYWORDS: {limit category} {*limit categories}
**
** These constants define various performance limits
** that can be lowered at run-time using [sqlite3_limit()].
** The synopsis of the meanings of the various limits is shown below.
** Additional information is available at [limits | Limits in SQLite].
**
** <dl>
** [[SQLITE_LIMIT_LENGTH]] ^(<dt>SQLITE_LIMIT_LENGTH</dt>
** <dd>The maximum size of any string or BLOB or table row, in bytes.<dd>)^
**
** [[SQLITE_LIMIT_SQL_LENGTH]] ^(<dt>SQLITE_LIMIT_SQL_LENGTH</dt>
** <dd>The maximum length of an SQL statement, in bytes.</dd>)^
**
** [[SQLITE_LIMIT_COLUMN]] ^(<dt>SQLITE_LIMIT_COLUMN</dt>
** <dd>The maximum number of columns in a table definition or in the
** result set of a [SELECT] or the maximum number of columns in an index
** or in an ORDER BY or GROUP BY clause.</dd>)^
**
** [[SQLITE_LIMIT_EXPR_DEPTH]] ^(<dt>SQLITE_LIMIT_EXPR_DEPTH</dt>
** <dd>The maximum depth of the parse tree on any expression.</dd>)^
**
** [[SQLITE_LIMIT_COMPOUND_SELECT]] ^(<dt>SQLITE_LIMIT_COMPOUND_SELECT</dt>
** <dd>The maximum number of terms in a compound SELECT statement.</dd>)^
**
** [[SQLITE_LIMIT_VDBE_OP]] ^(<dt>SQLITE_LIMIT_VDBE_OP</dt>
** <dd>The maximum number of instructions in a virtual machine program
** used to implement an SQL statement. This limit is not currently
** enforced, though that might be added in some future release of
** SQLite.</dd>)^
**
** [[SQLITE_LIMIT_FUNCTION_ARG]] ^(<dt>SQLITE_LIMIT_FUNCTION_ARG</dt>
** <dd>The maximum number of arguments on a function.</dd>)^
**
** [[SQLITE_LIMIT_ATTACHED]] ^(<dt>SQLITE_LIMIT_ATTACHED</dt>
** <dd>The maximum number of [ATTACH | attached databases].)^</dd>
**
** [[SQLITE_LIMIT_LIKE_PATTERN_LENGTH]]
** ^(<dt>SQLITE_LIMIT_LIKE_PATTERN_LENGTH</dt>
** <dd>The maximum length of the pattern argument to the [LIKE] or
** [GLOB] operators.</dd>)^
**
** [[SQLITE_LIMIT_VARIABLE_NUMBER]]
** ^(<dt>SQLITE_LIMIT_VARIABLE_NUMBER</dt>
** <dd>The maximum index number of any [parameter] in an SQL statement.)^
**
** [[SQLITE_LIMIT_TRIGGER_DEPTH]] ^(<dt>SQLITE_LIMIT_TRIGGER_DEPTH</dt>
** <dd>The maximum depth of recursion for triggers.</dd>)^
**
** [[SQLITE_LIMIT_WORKER_THREADS]] ^(<dt>SQLITE_LIMIT_WORKER_THREADS</dt>
** <dd>The maximum number of auxiliary worker threads that a single
** [prepared statement] may start.</dd>)^
** </dl>
*/
#define SQLITE_LIMIT_LENGTH 0
#define SQLITE_LIMIT_SQL_LENGTH 1
#define SQLITE_LIMIT_COLUMN 2
#define SQLITE_LIMIT_EXPR_DEPTH 3
#define SQLITE_LIMIT_COMPOUND_SELECT 4
#define SQLITE_LIMIT_VDBE_OP 5
#define SQLITE_LIMIT_FUNCTION_ARG 6
#define SQLITE_LIMIT_ATTACHED 7
#define SQLITE_LIMIT_LIKE_PATTERN_LENGTH 8
#define SQLITE_LIMIT_VARIABLE_NUMBER 9
#define SQLITE_LIMIT_TRIGGER_DEPTH 10
#define SQLITE_LIMIT_WORKER_THREADS 11

/*
** CAPI3REF: Compiling An SQL Statement
** KEYWORDS: {SQL statement compiler}
** METHOD: sqlite3
** CONSTRUCTOR: sqlite3_stmt
**
** To execute an SQL query, it must first be compiled into a byte-code
** program using one of these routines.
**
** The first argument, "db", is a [database connection] obtained from a
** prior successful call to [sqlite3_open()], [sqlite3_open_v2()] or
** [sqlite3_open16()]. The database connection must not have been closed.
**
** The second argument, "zSql", is the statement to be compiled, encoded
** as either UTF-8 or UTF-16. The sqlite3_prepare() and sqlite3_prepare_v2()
** interfaces use UTF-8, and sqlite3_prepare16() and sqlite3_prepare16_v2()
** use UTF-16.
**
** ^If the nByte argument is negative, then zSql is read up to the
** first zero terminator. ^If nByte is positive, then it is the
** number of bytes read from zSql. ^If nByte is zero, then no prepared
** statement is generated.
** If the caller knows that the supplied string is nul-terminated, then
** there is a small performance advantage to passing an nByte parameter that
** is the number of bytes in the input string including
** the nul-terminator.
**
** ^If pzTail is not NULL then *pzTail is made to point to the first byte
** past the end of the first SQL statement in zSql. These routines only
** compile the first statement in zSql, so *pzTail is left pointing to
** what remains uncompiled.
**
** ^*ppStmt is left pointing to a compiled [prepared statement] that can be
** executed using [sqlite3_step()]. ^If there is an error, *ppStmt is set
** to NULL. ^If the input text contains no SQL (if the input is an empty
** string or a comment) then *ppStmt is set to NULL.
** The calling procedure is responsible for deleting the compiled
** SQL statement using [sqlite3_finalize()] after it has finished with it.
** ppStmt may not be NULL.
**
** ^On success, the sqlite3_prepare() family of routines return [SQLITE_OK];
** otherwise an [error code] is returned.
**
** The sqlite3_prepare_v2() and sqlite3_prepare16_v2() interfaces are
** recommended for all new programs. The two older interfaces are retained
** for backwards compatibility, but their use is discouraged.
** ^In the "v2" interfaces, the prepared statement
** that is returned (the [sqlite3_stmt] object) contains a copy of the
** original SQL text. This causes the [sqlite3_step()] interface to
** behave differently in three ways:
**
** <ol>
** <li>
** ^If the database schema changes, instead of returning [SQLITE_SCHEMA] as it
** always used to do, [sqlite3_step()] will automatically recompile the SQL
** statement and try to run it again. As many as [SQLITE_MAX_SCHEMA_RETRY]
** retries will occur before sqlite3_step() gives up and returns an error.
** </li>
**
** <li>
** ^When an error occurs, [sqlite3_step()] will return one of the detailed
** [error codes] or [extended error codes]. ^The legacy behavior was that
** [sqlite3_step()] would only return a generic [SQLITE_ERROR] result code
** and the application would have to make a second call to [sqlite3_reset()]
** in order to find the underlying cause of the problem. With the "v2" prepare
** interfaces, the underlying reason for the error is returned immediately.
** </li>
**
** <li>
** ^If the specific value bound to [parameter | host parameter] in the 
** WHERE clause might influence the choice of query plan for a statement,
** then the statement will be automatically recompiled, as if there had been 
** a schema change, on the first [sqlite3_step()] call following any change
** to the [sqlite3_bind_text | bindings] of that [parameter]. 
** ^The specific value of WHERE-clause [parameter] might influence the 
** choice of query plan if the parameter is the left-hand side of a [LIKE]
** or [GLOB] operator or if the parameter is compared to an indexed column
** and the [SQLITE_ENABLE_STAT3] compile-time option is enabled.
** </li>
** </ol>
*/
SQLITE_API int SQLITE_STDCALL sqlite3_prepare(
 sqlite3 *db, /* Database handle */
 const char *zSql, /* SQL statement, UTF-8 encoded */
 int nByte, /* Maximum length of zSql in bytes. */
 sqlite3_stmt **ppStmt, /* OUT: Statement handle */
 const char **pzTail /* OUT: Pointer to unused portion of zSql */
);
SQLITE_API int SQLITE_STDCALL sqlite3_prepare_v2(
 sqlite3 *db, /* Database handle */
 const char *zSql, /* SQL statement, UTF-8 encoded */
 int nByte, /* Maximum length of zSql in bytes. */
 sqlite3_stmt **ppStmt, /* OUT: Statement handle */
 const char **pzTail /* OUT: Pointer to unused portion of zSql */
);
SQLITE_API int SQLITE_STDCALL sqlite3_prepare16(
 sqlite3 *db, /* Database handle */
 const void *zSql, /* SQL statement, UTF-16 encoded */
 int nByte, /* Maximum length of zSql in bytes. */
 sqlite3_stmt **ppStmt, /* OUT: Statement handle */
 const void **pzTail /* OUT: Pointer to unused portion of zSql */
);
SQLITE_API int SQLITE_STDCALL sqlite3_prepare16_v2(
 sqlite3 *db, /* Database handle */
 const void *zSql, /* SQL statement, UTF-16 encoded */
 int nByte, /* Maximum length of zSql in bytes. */
 sqlite3_stmt **ppStmt, /* OUT: Statement handle */
 const void **pzTail /* OUT: Pointer to unused portion of zSql */
);

/*
** CAPI3REF: Retrieving Statement SQL
** METHOD: sqlite3_stmt
**
** ^This interface can be used to retrieve a saved copy of the original
** SQL text used to create a [prepared statement] if that statement was
** compiled using either [sqlite3_prepare_v2()] or [sqlite3_prepare16_v2()].
*/
SQLITE_API const char *SQLITE_STDCALL sqlite3_sql(sqlite3_stmt *pStmt);

/*
** CAPI3REF: Determine If An SQL Statement Writes The Database
** METHOD: sqlite3_stmt
**
** ^The sqlite3_stmt_readonly(X) interface returns true (non-zero) if
** and only if the [prepared statement] X makes no direct changes to
** the content of the database file.
**
** Note that [application-defined SQL functions] or
** [virtual tables] might change the database indirectly as a side effect. 
** ^(For example, if an application defines a function "eval()" that 
** calls [sqlite3_exec()], then the following SQL statement would
** change the database file through side-effects:
**
** <blockquote><pre>
** SELECT eval('DELETE FROM t1') FROM t2;
** </pre></blockquote>
**
** But because the [SELECT] statement does not change the database file
** directly, sqlite3_stmt_readonly() would still return true.)^
**
** ^Transaction control statements such as [BEGIN], [COMMIT], [ROLLBACK],
** [SAVEPOINT], and [RELEASE] cause sqlite3_stmt_readonly() to return true,
** since the statements themselves do not actually modify the database but
** rather they control the timing of when other statements modify the 
** database. ^The [ATTACH] and [DETACH] statements also cause
** sqlite3_stmt_readonly() to return true since, while those statements
** change the configuration of a database connection, they do not make 
** changes to the content of the database files on disk.
*/
SQLITE_API int SQLITE_STDCALL sqlite3_stmt_readonly(sqlite3_stmt *pStmt);

/*
** CAPI3REF: Determine If A Prepared Statement Has Been Reset
** METHOD: sqlite3_stmt
**
** ^The sqlite3_stmt_busy(S) interface returns true (non-zero) if the
** [prepared statement] S has been stepped at least once using 
** [sqlite3_step(S)] but has not run to completion and/or has not 
** been reset using [sqlite3_reset(S)].  ^The sqlite3_stmt_busy(S)
** interface returns false if S is a NULL pointer.  If S is not a 
** NULL pointer and is not a pointer to a valid [prepared statement]
** object, then the behavior is undefined and probably undesirable.
**
** This interface can be used in combination [sqlite3_next_stmt()]
** to locate all prepared statements associated with a database 
** connection that are in need of being reset.  This can be used,
** for example, in diagnostic routines to search for prepared 
** statements that are holding a transaction open.
*/
SQLITE_API int SQLITE_STDCALL sqlite3_stmt_busy(sqlite3_stmt*);

/*
** CAPI3REF: Dynamically Typed Value Object
** KEYWORDS: {protected sqlite3_value} {unprotected sqlite3_value}
**
** SQLite uses the sqlite3_value object to represent all values
** that can be stored in a database table. SQLite uses dynamic typing
** for the values it stores.  ^Values stored in sqlite3_value objects
** can be integers, floating point values, strings, BLOBs, or NULL.
**
** An sqlite3_value object may be either "protected" or "unprotected".
** Some interfaces require a protected sqlite3_value.  Other interfaces
** will accept either a protected or an unprotected sqlite3_value.
** Every interface that accepts sqlite3_value arguments specifies
** whether or not it requires a protected sqlite3_value.
**
** The terms "protected" and "unprotected" refer to whether or not
** a mutex is held.  An internal mutex is held for a protected
** sqlite3_value object but no mutex is held for an unprotected
** sqlite3_value object.  If SQLite is compiled to be single-threaded
** (with [SQLITE_THREADSAFE=0] and with [sqlite3_threadsafe()] returning 0)
** or if SQLite is run in one of reduced mutex modes 
** [SQLITE_CONFIG_SINGLETHREAD] or [SQLITE_CONFIG_MULTITHREAD]
** then there is no distinction between protected and unprotected
** sqlite3_value objects and they can be used interchangeably.  However,
** for maximum code portability it is recommended that applications
** still make the distinction between protected and unprotected
** sqlite3_value objects even when not strictly required.
**
** ^The sqlite3_value objects that are passed as parameters into the
** implementation of [application-defined SQL functions] are protected.
** ^The sqlite3_value object returned by
** [sqlite3_column_value()] is unprotected.
** Unprotected sqlite3_value objects may only be used with
** [sqlite3_result_value()] and [sqlite3_bind_value()].
** The [sqlite3_value_blob | sqlite3_value_type()] family of
** interfaces require protected sqlite3_value objects.
*/
typedef struct Mem sqlite3_value;

/*
** CAPI3REF: SQL Function Context Object
**
** The context in which an SQL function executes is stored in an
** sqlite3_context object.  ^A pointer to an sqlite3_context object
** is always first parameter to [application-defined SQL functions].
** The application-defined SQL function implementation will pass this
** pointer through into calls to [sqlite3_result_int | sqlite3_result()],
** [sqlite3_aggregate_context()], [sqlite3_user_data()],
** [sqlite3_context_db_handle()], [sqlite3_get_auxdata()],
** and/or [sqlite3_set_auxdata()].
*/
typedef struct sqlite3_context sqlite3_context;

/*
** CAPI3REF: Binding Values To Prepared Statements
** KEYWORDS: {host parameter} {host parameters} {host parameter name}
** KEYWORDS: {SQL parameter} {SQL parameters} {parameter binding}
** METHOD: sqlite3_stmt
**
** ^(In the SQL statement text input to [sqlite3_prepare_v2()] and its variants,
** literals may be replaced by a [parameter] that matches one of following
** templates:
**
** <ul>
** <li> ?
** <li> ?NNN
** <li> :VVV
** <li> @VVV
** <li> $VVV
** </ul>
**
** In the templates above, NNN represents an integer literal,
** and VVV represents an alphanumeric identifier.)^ ^The values of these
** parameters (also called "host parameter names" or "SQL parameters")
** can be set using the sqlite3_bind_*() routines defined here.
**
** ^The first argument to the sqlite3_bind_*() routines is always
** a pointer to the [sqlite3_stmt] object returned from
** [sqlite3_prepare_v2()] or its variants.
**
** ^The second argument is the index of the SQL parameter to be set.
** ^The leftmost SQL parameter has an index of 1. ^When the same named
** SQL parameter is used more than once, second and subsequent
** occurrences have the same index as the first occurrence.
** ^The index for named parameters can be looked up using the
** [sqlite3_bind_parameter_index()] API if desired. ^The index
** for "?NNN" parameters is the value of NNN.
** ^The NNN value must be between 1 and the [sqlite3_limit()]
** parameter [SQLITE_LIMIT_VARIABLE_NUMBER] (default value: 999).
**
** ^The third argument is the value to bind to the parameter.
** ^If the third parameter to sqlite3_bind_text() or sqlite3_bind_text16()
** or sqlite3_bind_blob() is a NULL pointer then the fourth parameter
** is ignored and the end result is the same as sqlite3_bind_null().
**
** ^(In those routines that have a fourth argument, its value is the
** number of bytes in the parameter. To be clear: the value is the
** number of bytes in the value, not the number of characters.)^
** ^If the fourth parameter to sqlite3_bind_text() or sqlite3_bind_text16()
** is negative, then the length of the string is
** the number of bytes up to the first zero terminator.
** If the fourth parameter to sqlite3_bind_blob() is negative, then
** the behavior is undefined.
** If a non-negative fourth parameter is provided to sqlite3_bind_text()
** or sqlite3_bind_text16() or sqlite3_bind_text64() then
** that parameter must be the byte offset
** where the NUL terminator would occur assuming the string were NUL
** terminated. If any NUL characters occur at byte offsets less than 
** the value of the fourth parameter then the resulting string value will
** contain embedded NULs. The result of expressions involving strings
** with embedded NULs is undefined.
**
** ^The fifth argument to the BLOB and string binding interfaces
** is a destructor used to dispose of the BLOB or
** string after SQLite has finished with it. ^The destructor is called
** to dispose of the BLOB or string even if the call to bind API fails.
** ^If the fifth argument is
** the special value [SQLITE_STATIC], then SQLite assumes that the
** information is in static, unmanaged space and does not need to be freed.
** ^If the fifth argument has the value [SQLITE_TRANSIENT], then
** SQLite makes its own private copy of the data immediately, before
** the sqlite3_bind_*() routine returns.
**
** ^The sixth argument to sqlite3_bind_text64() must be one of
** [SQLITE_UTF8], [SQLITE_UTF16], [SQLITE_UTF16BE], or [SQLITE_UTF16LE]
** to specify the encoding of the text in the third parameter. If
** the sixth argument to sqlite3_bind_text64() is not one of the
** allowed values shown above, or if the text encoding is different
** from the encoding specified by the sixth parameter, then the behavior
** is undefined.
**
** ^The sqlite3_bind_zeroblob() routine binds a BLOB of length N that
** is filled with zeroes. ^A zeroblob uses a fixed amount of memory
** (just an integer to hold its size) while it is being processed.
** Zeroblobs are intended to serve as placeholders for BLOBs whose
** content is later written using
** [sqlite3_blob_open | incremental BLOB I/O] routines.
** ^A negative value for the zeroblob results in a zero-length BLOB.
**
** ^If any of the sqlite3_bind_*() routines are called with a NULL pointer
** for the [prepared statement] or with a prepared statement for which
** [sqlite3_step()] has been called more recently than [sqlite3_reset()],
** then the call will return [SQLITE_MISUSE]. If any sqlite3_bind_()
** routine is passed a [prepared statement] that has been finalized, the
** result is undefined and probably harmful.
**
** ^Bindings are not cleared by the [sqlite3_reset()] routine.
** ^Unbound parameters are interpreted as NULL.
**
** ^The sqlite3_bind_* routines return [SQLITE_OK] on success or an
** [error code] if anything goes wrong.
** ^[SQLITE_TOOBIG] might be returned if the size of a string or BLOB
** exceeds limits imposed by [sqlite3_limit]([SQLITE_LIMIT_LENGTH]) or
** [SQLITE_MAX_LENGTH].
** ^[SQLITE_RANGE] is returned if the parameter
** index is out of range. ^[SQLITE_NOMEM] is returned if malloc() fails.
**
** See also: [sqlite3_bind_parameter_count()],
** [sqlite3_bind_parameter_name()], and [sqlite3_bind_parameter_index()].
*/
SQLITE_API int SQLITE_STDCALL sqlite3_bind_blob(sqlite3_stmt*, int, const void*, int n, void(*)(void*));
SQLITE_API int SQLITE_STDCALL sqlite3_bind_blob64(sqlite3_stmt*, int, const void*, sqlite3_uint64,
 void(*)(void*));
SQLITE_API int SQLITE_STDCALL sqlite3_bind_double(sqlite3_stmt*, int, double);
SQLITE_API int SQLITE_STDCALL sqlite3_bind_int(sqlite3_stmt*, int, int);
SQLITE_API int SQLITE_STDCALL sqlite3_bind_int64(sqlite3_stmt*, int, sqlite3_int64);
SQLITE_API int SQLITE_STDCALL sqlite3_bind_null(sqlite3_stmt*, int);
SQLITE_API int SQLITE_STDCALL sqlite3_bind_text(sqlite3_stmt*,int,const char*,int,void(*)(void*));
SQLITE_API int SQLITE_STDCALL sqlite3_bind_text16(sqlite3_stmt*, int, const void*, int, void(*)(void*));
SQLITE_API int SQLITE_STDCALL sqlite3_bind_text64(sqlite3_stmt*, int, const char*, sqlite3_uint64,
 void(*)(void*), unsigned char encoding);
SQLITE_API int SQLITE_STDCALL sqlite3_bind_value(sqlite3_stmt*, int, const sqlite3_value*);
SQLITE_API int SQLITE_STDCALL sqlite3_bind_zeroblob(sqlite3_stmt*, int, int n);

/*
** CAPI3REF: Number Of SQL Parameters
** METHOD: sqlite3_stmt
**
** ^This routine can be used to find the number of [SQL parameters]
** in a [prepared statement].  SQL parameters are tokens of the
** form "?", "?NNN", ":AAA", "$AAA", or "@AAA" that serve as
** placeholders for values that are [sqlite3_bind_blob | bound]
** to the parameters at a later time.
**
** ^(This routine actually returns the index of the largest (rightmost)
** parameter. For all forms except ?NNN, this will correspond to the
** number of unique parameters.  If parameters of the ?NNN form are used,
** there may be gaps in the list.)^
**
** See also: [sqlite3_bind_blob|sqlite3_bind()],
** [sqlite3_bind_parameter_name()], and
** [sqlite3_bind_parameter_index()].
*/
SQLITE_API int SQLITE_STDCALL sqlite3_bind_parameter_count(sqlite3_stmt*);

/*
** CAPI3REF: Name Of A Host Parameter
** METHOD: sqlite3_stmt
**
** ^The sqlite3_bind_parameter_name(P,N) interface returns
** the name of the N-th [SQL parameter] in the [prepared statement] P.
** ^(SQL parameters of the form "?NNN" or ":AAA" or "@AAA" or "$AAA"
** have a name which is the string "?NNN" or ":AAA" or "@AAA" or "$AAA"
** respectively.
** In other words, the initial ":" or "$" or "@" or "?"
** is included as part of the name.)^
** ^Parameters of the form "?" without a following integer have no name
** and are referred to as "nameless" or "anonymous parameters".
**
** ^The first host parameter has an index of 1, not 0.
**
** ^If the value N is out of range or if the N-th parameter is
** nameless, then NULL is returned.  ^The returned string is
** always in UTF-8 encoding even if the named parameter was
** originally specified as UTF-16 in [sqlite3_prepare16()] or
** [sqlite3_prepare16_v2()].
**
** See also: [sqlite3_bind_blob|sqlite3_bind()],
** [sqlite3_bind_parameter_count()], and
** [sqlite3_bind_parameter_index()].
*/
SQLITE_API const char *SQLITE_STDCALL sqlite3_bind_parameter_name(sqlite3_stmt*, int);

/*
** CAPI3REF: Index Of A Parameter With A Given Name
** METHOD: sqlite3_stmt
**
** ^Return the index of an SQL parameter given its name.  ^The
** index value returned is suitable for use as the second
** parameter to [sqlite3_bind_blob|sqlite3_bind()].  ^A zero
** is returned if no matching parameter is found.  ^The parameter
** name must be given in UTF-8 even if the original statement
** was prepared from UTF-16 text using [sqlite3_prepare16_v2()].
**
** See also: [sqlite3_bind_blob|sqlite3_bind()],
** [sqlite3_bind_parameter_count()], and
** [sqlite3_bind_parameter_index()].
*/
SQLITE_API int SQLITE_STDCALL sqlite3_bind_parameter_index(sqlite3_stmt*, const char *zName);

/*
** CAPI3REF: Reset All Bindings On A Prepared Statement
** METHOD: sqlite3_stmt
**
** ^Contrary to the intuition of many, [sqlite3_reset()] does not reset
** the [sqlite3_bind_blob | bindings] on a [prepared statement].
** ^Use this routine to reset all host parameters to NULL.
*/
SQLITE_API int SQLITE_STDCALL sqlite3_clear_bindings(sqlite3_stmt*);

/*
** CAPI3REF: Number Of Columns In A Result Set
** METHOD: sqlite3_stmt
**
** ^Return the number of columns in the result set returned by the
** [prepared statement]. ^This routine returns 0 if pStmt is an SQL
** statement that does not return data (for example an [UPDATE]).
**
** See also: [sqlite3_data_count()]
*/
SQLITE_API int SQLITE_STDCALL sqlite3_column_count(sqlite3_stmt *pStmt);

/*
** CAPI3REF: Column Names In A Result Set
** METHOD: sqlite3_stmt
**
** ^These routines return the name assigned to a particular column
** in the result set of a [SELECT] statement.  ^The sqlite3_column_name()
** interface returns a pointer to a zero-terminated UTF-8 string
** and sqlite3_column_name16() returns a pointer to a zero-terminated
** UTF-16 string.  ^The first parameter is the [prepared statement]
** that implements the [SELECT] statement. ^The second parameter is the
** column number.  ^The leftmost column is number 0.
**
** ^The returned string pointer is valid until either the [prepared statement]
** is destroyed by [sqlite3_finalize()] or until the statement is automatically
** reprepared by the first call to [sqlite3_step()] for a particular run
** or until the next call to
** sqlite3_column_name() or sqlite3_column_name16() on the same column.
**
** ^If sqlite3_malloc() fails during the processing of either routine
** (for example during a conversion from UTF-8 to UTF-16) then a
** NULL pointer is returned.
**
** ^The name of a result column is the value of the "AS" clause for
** that column, if there is an AS clause.  If there is no AS clause
** then the name of the column is unspecified and may change from
** one release of SQLite to the next.
*/
SQLITE_API const char *SQLITE_STDCALL sqlite3_column_name(sqlite3_stmt*, int N);
SQLITE_API const void *SQLITE_STDCALL sqlite3_column_name16(sqlite3_stmt*, int N);

/*
** CAPI3REF: Source Of Data In A Query Result
** METHOD: sqlite3_stmt
**
** ^These routines provide a means to determine the database, table, and
** table column that is the origin of a particular result column in
** [SELECT] statement.
** ^The name of the database or table or column can be returned as
** either a UTF-8 or UTF-16 string.  ^The _database_ routines return
** the database name, the _table_ routines return the table name, and
** the origin_ routines return the column name.
** ^The returned string is valid until the [prepared statement] is destroyed
** using [sqlite3_finalize()] or until the statement is automatically
** reprepared by the first call to [sqlite3_step()] for a particular run
** or until the same information is requested
** again in a different encoding.
**
** ^The names returned are the original un-aliased names of the
** database, table, and column.
**
** ^The first argument to these interfaces is a [prepared statement].
** ^These functions return information about the Nth result column returned by
** the statement, where N is the second function argument.
** ^The left-most column is column 0 for these routines.
**
** ^If the Nth column returned by the statement is an expression or
** subquery and is not a column value, then all of these functions return
** NULL.  ^These routine might also return NULL if a memory allocation error
** occurs.  ^Otherwise, they return the name of the attached database, table,
** or column that query result column was extracted from.
**
** ^As with all other SQLite APIs, those whose names end with "16" return
** UTF-16 encoded strings and the other functions return UTF-8.
**
** ^These APIs are only available if the library was compiled with the
** [SQLITE_ENABLE_COLUMN_METADATA] C-preprocessor symbol.
**
** If two or more threads call one or more of these routines against the same
** prepared statement and column at the same time then the results are
** undefined.
**
** If two or more threads call one or more
** [sqlite3_column_database_name | column metadata interfaces]
** for the same [prepared statement] and result column
** at the same time then the results are undefined.
*/
SQLITE_API const char *SQLITE_STDCALL sqlite3_column_database_name(sqlite3_stmt*,int);
SQLITE_API const void *SQLITE_STDCALL sqlite3_column_database_name16(sqlite3_stmt*,int);
SQLITE_API const char *SQLITE_STDCALL sqlite3_column_table_name(sqlite3_stmt*,int);
SQLITE_API const void *SQLITE_STDCALL sqlite3_column_table_name16(sqlite3_stmt*,int);
SQLITE_API const char *SQLITE_STDCALL sqlite3_column_origin_name(sqlite3_stmt*,int);
SQLITE_API const void *SQLITE_STDCALL sqlite3_column_origin_name16(sqlite3_stmt*,int);

/*
** CAPI3REF: Declared Datatype Of A Query Result
** METHOD: sqlite3_stmt
**
** ^(The first parameter is a [prepared statement].
** If this statement is a [SELECT] statement and the Nth column of the
** returned result set of that [SELECT] is a table column (not an
** expression or subquery) then the declared type of the table
** column is returned.)^  ^If the Nth column of the result set is an
** expression or subquery, then a NULL pointer is returned.
** ^The returned string is always UTF-8 encoded.
**
** ^(For example, given the database schema:
**
** CREATE TABLE t1(c1 VARIANT);
**
** and the following statement to be compiled:
**
** SELECT c1 + 1, c1 FROM t1;
**
** this routine would return the string "VARIANT" for the second result
** column (i==1), and a NULL pointer for the first result column (i==0).)^
**
** ^SQLite uses dynamic run-time typing.  ^So just because a column
** is declared to contain a particular type does not mean that the
** data stored in that column is of the declared type.  SQLite is
** strongly typed, but the typing is dynamic not static.  ^Type
** is associated with individual values, not with the containers
** used to hold those values.
*/
SQLITE_API const char *SQLITE_STDCALL sqlite3_column_decltype(sqlite3_stmt*,int);
SQLITE_API const void *SQLITE_STDCALL sqlite3_column_decltype16(sqlite3_stmt*,int);

/*
** CAPI3REF: Evaluate An SQL Statement
** METHOD: sqlite3_stmt
**
** After a [prepared statement] has been prepared using either
** [sqlite3_prepare_v2()] or [sqlite3_prepare16_v2()] or one of the legacy
** interfaces [sqlite3_prepare()] or [sqlite3_prepare16()], this function
** must be called one or more times to evaluate the statement.
**
** The details of the behavior of the sqlite3_step() interface depend
** on whether the statement was prepared using the newer "v2" interface
** [sqlite3_prepare_v2()] and [sqlite3_prepare16_v2()] or the older legacy
** interface [sqlite3_prepare()] and [sqlite3_prepare16()]. The use of the
** new "v2" interface is recommended for new applications but the legacy
** interface will continue to be supported.
**
** ^In the legacy interface, the return value will be either [SQLITE_BUSY],
** [SQLITE_DONE], [SQLITE_ROW], [SQLITE_ERROR], or [SQLITE_MISUSE].
** ^With the "v2" interface, any of the other [result codes] or
** [extended result codes] might be returned as well.
**
** ^[SQLITE_BUSY] means that the database engine was unable to acquire the
** database locks it needs to do its job. ^If the statement is a [COMMIT]
** or occurs outside of an explicit transaction, then you can retry the
** statement. If the statement is not a [COMMIT] and occurs within an
** explicit transaction then you should rollback the transaction before
** continuing.
**
** ^[SQLITE_DONE] means that the statement has finished executing
** successfully. sqlite3_step() should not be called again on this virtual
** machine without first calling [sqlite3_reset()] to reset the virtual
** machine back to its initial state.
**
** ^If the SQL statement being executed returns any data, then [SQLITE_ROW]
** is returned each time a new row of data is ready for processing by the
** caller. The values may be accessed using the [column access functions].
** sqlite3_step() is called again to retrieve the next row of data.
**
** ^[SQLITE_ERROR] means that a run-time error (such as a constraint
** violation) has occurred. sqlite3_step() should not be called again on
** the VM. More information may be found by calling [sqlite3_errmsg()].
** ^With the legacy interface, a more specific error code (for example,
** [SQLITE_INTERRUPT], [SQLITE_SCHEMA], [SQLITE_CORRUPT], and so forth)
** can be obtained by calling [sqlite3_reset()] on the
** [prepared statement]. ^In the "v2" interface,
** the more specific error code is returned directly by sqlite3_step().
**
** [SQLITE_MISUSE] means that the this routine was called inappropriately.
** Perhaps it was called on a [prepared statement] that has
** already been [sqlite3_finalize | finalized] or on one that had
** previously returned [SQLITE_ERROR] or [SQLITE_DONE]. Or it could
** be the case that the same database connection is being used by two or
** more threads at the same moment in time.
**
** For all versions of SQLite up to and including 3.6.23.1, a call to
** [sqlite3_reset()] was required after sqlite3_step() returned anything
** other than [SQLITE_ROW] before any subsequent invocation of
** sqlite3_step(). Failure to reset the prepared statement using 
** [sqlite3_reset()] would result in an [SQLITE_MISUSE] return from
** sqlite3_step(). But after version 3.6.23.1, sqlite3_step() began
** calling [sqlite3_reset()] automatically in this circumstance rather
** than returning [SQLITE_MISUSE]. This is not considered a compatibility
** break because any application that ever receives an SQLITE_MISUSE error
** is broken by definition. The [SQLITE_OMIT_AUTORESET] compile-time option
** can be used to restore the legacy behavior.
**
** Goofy Interface Alert: In the legacy interface, the sqlite3_step()
** API always returns a generic error code, [SQLITE_ERROR], following any
** error other than [SQLITE_BUSY] and [SQLITE_MISUSE]. You must call
** [sqlite3_reset()] or [sqlite3_finalize()] in order to find one of the
** specific [error codes] that better describes the error.
** We admit that this is a goofy design. The problem has been fixed
** with the "v2" interface. If you prepare all of your SQL statements
** using either [sqlite3_prepare_v2()] or [sqlite3_prepare16_v2()] instead
** of the legacy [sqlite3_prepare()] and [sqlite3_prepare16()] interfaces,
** then the more specific [error codes] are returned directly
** by sqlite3_step(). The use of the "v2" interface is recommended.
*/
SQLITE_API int SQLITE_STDCALL sqlite3_step(sqlite3_stmt*);

/*
** CAPI3REF: Number of columns in a result set
** METHOD: sqlite3_stmt
**
** ^The sqlite3_data_count(P) interface returns the number of columns in the
** current row of the result set of [prepared statement] P.
** ^If prepared statement P does not have results ready to return
** (via calls to the [sqlite3_column_int | sqlite3_column_*()] of
** interfaces) then sqlite3_data_count(P) returns 0.
** ^The sqlite3_data_count(P) routine also returns 0 if P is a NULL pointer.
** ^The sqlite3_data_count(P) routine returns 0 if the previous call to
** [sqlite3_step](P) returned [SQLITE_DONE].  ^The sqlite3_data_count(P)
** will return non-zero if previous call to [sqlite3_step](P) returned
** [SQLITE_ROW], except in the case of the [PRAGMA incremental_vacuum]
** where it always returns zero since each step of that multi-step
** pragma returns 0 columns of data.
**
** See also: [sqlite3_column_count()]
*/
SQLITE_API int SQLITE_STDCALL sqlite3_data_count(sqlite3_stmt *pStmt);

/*
** CAPI3REF: Fundamental Datatypes
** KEYWORDS: SQLITE_TEXT
**
** ^(Every value in SQLite has one of five fundamental datatypes:
**
** <ul>
** <li> 64-bit signed integer
** <li> 64-bit IEEE floating point number
** <li> string
** <li> BLOB
** <li> NULL
** </ul>)^
**
** These constants are codes for each of those types.
**
** Note that the SQLITE_TEXT constant was also used in SQLite version 2
** for a completely different meaning. Software that links against both
** SQLite version 2 and SQLite version 3 should use SQLITE3_TEXT, not
** SQLITE_TEXT.
*/
#define SQLITE_INTEGER 1
#define SQLITE_FLOAT 2
#define SQLITE_BLOB 4
#define SQLITE_NULL 5
#ifdef SQLITE_TEXT
# undef SQLITE_TEXT
#else
# define SQLITE_TEXT 3
#endif
#define SQLITE3_TEXT 3

/*
** CAPI3REF: Result Values From A Query
** KEYWORDS: {column access functions}
** METHOD: sqlite3_stmt
**
** These routines form the "result set" interface.
**
** ^These routines return information about a single column of the current
** result row of a query. ^In every case the first argument is a pointer
** to the [prepared statement] that is being evaluated (the [sqlite3_stmt*]
** that was returned from [sqlite3_prepare_v2()] or one of its variants)
** and the second argument is the index of the column for which information
** should be returned. ^The leftmost column of the result set has the index 0.
** ^The number of columns in the result can be determined using
** [sqlite3_column_count()].
**
** If the SQL statement does not currently point to a valid row, or if the
** column index is out of range, the result is undefined.
** These routines may only be called when the most recent call to
** [sqlite3_step()] has returned [SQLITE_ROW] and neither
** [sqlite3_reset()] nor [sqlite3_finalize()] have been called subsequently.
** If any of these routines are called after [sqlite3_reset()] or
** [sqlite3_finalize()] or after [sqlite3_step()] has returned
** something other than [SQLITE_ROW], the results are undefined.
** If [sqlite3_step()] or [sqlite3_reset()] or [sqlite3_finalize()]
** are called from a different thread while any of these routines
** are pending, then the results are undefined.
**
** ^The sqlite3_column_type() routine returns the
** [SQLITE_INTEGER | datatype code] for the initial data type
** of the result column. ^The returned value is one of [SQLITE_INTEGER],
** [SQLITE_FLOAT], [SQLITE_TEXT], [SQLITE_BLOB], or [SQLITE_NULL]. The value
** returned by sqlite3_column_type() is only meaningful if no type
** conversions have occurred as described below. After a type conversion,
** the value returned by sqlite3_column_type() is undefined. Future
** versions of SQLite may change the behavior of sqlite3_column_type()
** following a type conversion.
**
** ^If the result is a BLOB or UTF-8 string then the sqlite3_column_bytes()
** routine returns the number of bytes in that BLOB or string.
** ^If the result is a UTF-16 string, then sqlite3_column_bytes() converts
** the string to UTF-8 and then returns the number of bytes.
** ^If the result is a numeric value then sqlite3_column_bytes() uses
** [sqlite3_snprintf()] to convert that value to a UTF-8 string and returns
** the number of bytes in that string.
** ^If the result is NULL, then sqlite3_column_bytes() returns zero.
**
** ^If the result is a BLOB or UTF-16 string then the sqlite3_column_bytes16()
** routine returns the number of bytes in that BLOB or string.
** ^If the result is a UTF-8 string, then sqlite3_column_bytes16() converts
** the string to UTF-16 and then returns the number of bytes.
** ^If the result is a numeric value then sqlite3_column_bytes16() uses
** [sqlite3_snprintf()] to convert that value to a UTF-16 string and returns
** the number of bytes in that string.
** ^If the result is NULL, then sqlite3_column_bytes16() returns zero.
**
** ^The values returned by [sqlite3_column_bytes()] and 
** [sqlite3_column_bytes16()] do not include the zero terminators at the end
** of the string. ^For clarity: the values returned by
** [sqlite3_column_bytes()] and [sqlite3_column_bytes16()] are the number of
** bytes in the string, not the number of characters.
**
** ^Strings returned by sqlite3_column_text() and sqlite3_column_text16(),
** even empty strings, are always zero-terminated. ^The return
** value from sqlite3_column_blob() for a zero-length BLOB is a NULL pointer.
**
** ^The object returned by [sqlite3_column_value()] is an
** [unprotected sqlite3_value] object. An unprotected sqlite3_value object
** may only be used with [sqlite3_bind_value()] and [sqlite3_result_value()].
** If the [unprotected sqlite3_value] object returned by
** [sqlite3_column_value()] is used in any other way, including calls
** to routines like [sqlite3_value_int()], [sqlite3_value_text()],
** or [sqlite3_value_bytes()], then the behavior is undefined.
**
** These routines attempt to convert the value where appropriate. ^For
** example, if the internal representation is FLOAT and a text result
** is requested, [sqlite3_snprintf()] is used internally to perform the
** conversion automatically. ^(The following table details the conversions
** that are applied:
**
** <blockquote>
** <table border="1">
** <tr><th> Internal Type <th> Requested Type <th> Conversion
**
** <tr><td> NULL <td> INTEGER <td> Result is 0
** <tr><td> NULL <td> FLOAT <td> Result is 0.0
** <tr><td> NULL <td> TEXT <td> Result is a NULL pointer
** <tr><td> NULL <td> BLOB <td> Result is a NULL pointer
** <tr><td> INTEGER <td> FLOAT <td> Convert from integer to float
** <tr><td> INTEGER <td> TEXT <td> ASCII rendering of the integer
** <tr><td> INTEGER <td> BLOB <td> Same as INTEGER->TEXT
** <tr><td> FLOAT <td> INTEGER <td> [CAST] to INTEGER
** <tr><td> FLOAT <td> TEXT <td> ASCII rendering of the float
** <tr><td> FLOAT <td> BLOB <td> [CAST] to BLOB
** <tr><td> TEXT <td> INTEGER <td> [CAST] to INTEGER
** <tr><td> TEXT <td> FLOAT <td> [CAST] to REAL
** <tr><td> TEXT <td> BLOB <td> No change
** <tr><td> BLOB <td> INTEGER <td> [CAST] to INTEGER
** <tr><td> BLOB <td> FLOAT <td> [CAST] to REAL
** <tr><td> BLOB <td> TEXT <td> Add a zero terminator if needed
** </table>
** </blockquote>)^
**
** The table above makes reference to standard C library functions atoi()
** and atof(). SQLite does not really use these functions. It has its
** own equivalent internal routines. The atoi() and atof() names are
** used in the table for brevity and because they are familiar to most
** C programmers.
**
** Note that when type conversions occur, pointers returned by prior
** calls to sqlite3_column_blob(), sqlite3_column_text(), and/or
** sqlite3_column_text16() may be invalidated.
** Type conversions and pointer invalidations might occur
** in the following cases:
**
** <ul>
** <li> The initial content is a BLOB and sqlite3_column_text() or
** sqlite3_column_text16() is called. A zero-terminator might
** need to be added to the string.</li>
** <li> The initial content is UTF-8 text and sqlite3_column_bytes16() or
** sqlite3_column_text16() is called. The content must be converted
** to UTF-16.</li>
** <li> The initial content is UTF-16 text and sqlite3_column_bytes() or
** sqlite3_column_text() is called. The content must be converted
** to UTF-8.</li>
** </ul>
**
** ^Conversions between UTF-16be and UTF-16le are always done in place and do
** not invalidate a prior pointer, though of course the content of the buffer
** that the prior pointer references will have been modified. Other kinds
** of conversion are done in place when it is possible, but sometimes they
** are not possible and in those cases prior pointers are invalidated.
**
** The safest and easiest to remember policy is to invoke these routines
** in one of the following ways:
**
** <ul>
** <li>sqlite3_column_text() followed by sqlite3_column_bytes()</li>
** <li>sqlite3_column_blob() followed by sqlite3_column_bytes()</li>
** <li>sqlite3_column_text16() followed by sqlite3_column_bytes16()</li>
** </ul>
**
** In other words, you should call sqlite3_column_text(),
** sqlite3_column_blob(), or sqlite3_column_text16() first to force the result
** into the desired format, then invoke sqlite3_column_bytes() or
** sqlite3_column_bytes16() to find the size of the result. Do not mix calls
** to sqlite3_column_text() or sqlite3_column_blob() with calls to
** sqlite3_column_bytes16(), and do not mix calls to sqlite3_column_text16()
** with calls to sqlite3_column_bytes().
**
** ^The pointers returned are valid until a type conversion occurs as
** described above, or until [sqlite3_step()] or [sqlite3_reset()] or
** [sqlite3_finalize()] is called. ^The memory space used to hold strings
** and BLOBs is freed automatically. Do not pass the pointers returned
** from [sqlite3_column_blob()], [sqlite3_column_text()], etc. into
** [sqlite3_free()].
**
** ^(If a memory allocation error occurs during the evaluation of any
** of these routines, a default value is returned. The default value
** is either the integer 0, the floating point number 0.0, or a NULL
** pointer. Subsequent calls to [sqlite3_errcode()] will return
** [SQLITE_NOMEM].)^
*/
SQLITE_API const void *SQLITE_STDCALL sqlite3_column_blob(sqlite3_stmt*, int iCol);
SQLITE_API int SQLITE_STDCALL sqlite3_column_bytes(sqlite3_stmt*, int iCol);
SQLITE_API int SQLITE_STDCALL sqlite3_column_bytes16(sqlite3_stmt*, int iCol);
SQLITE_API double SQLITE_STDCALL sqlite3_column_double(sqlite3_stmt*, int iCol);
SQLITE_API int SQLITE_STDCALL sqlite3_column_int(sqlite3_stmt*, int iCol);
SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_column_int64(sqlite3_stmt*, int iCol);
SQLITE_API const unsigned char *SQLITE_STDCALL sqlite3_column_text(sqlite3_stmt*, int iCol);
SQLITE_API const void *SQLITE_STDCALL sqlite3_column_text16(sqlite3_stmt*, int iCol);
SQLITE_API int SQLITE_STDCALL sqlite3_column_type(sqlite3_stmt*, int iCol);
SQLITE_API sqlite3_value *SQLITE_STDCALL sqlite3_column_value(sqlite3_stmt*, int iCol);

/*
** CAPI3REF: Destroy A Prepared Statement Object
** DESTRUCTOR: sqlite3_stmt
**
** ^The sqlite3_finalize() function is called to delete a [prepared statement].
** ^If the most recent evaluation of the statement encountered no errors
** or if the statement is never been evaluated, then sqlite3_finalize() returns
** SQLITE_OK.  ^If the most recent evaluation of statement S failed, then
** sqlite3_finalize(S) returns the appropriate [error code] or
** [extended error code].
**
** ^The sqlite3_finalize(S) routine can be called at any point during
** the life cycle of [prepared statement] S:
** before statement S is ever evaluated, after
** one or more calls to [sqlite3_reset()], or after any call
** to [sqlite3_step()] regardless of whether or not the statement has
** completed execution.
**
** ^Invoking sqlite3_finalize() on a NULL pointer is a harmless no-op.
**
** The application must finalize every [prepared statement] in order to avoid
** resource leaks.  It is a grievous error for the application to try to use
** a prepared statement after it has been finalized.  Any use of a prepared
** statement after it has been finalized can result in undefined and
** undesirable behavior such as segfaults and heap corruption.
*/
SQLITE_API int SQLITE_STDCALL sqlite3_finalize(sqlite3_stmt *pStmt);

/*
** CAPI3REF: Reset A Prepared Statement Object
** METHOD: sqlite3_stmt
**
** The sqlite3_reset() function is called to reset a [prepared statement]
** object back to its initial state, ready to be re-executed.
** ^Any SQL statement variables that had values bound to them using
** the [sqlite3_bind_blob | sqlite3_bind_*() API] retain their values.
** Use [sqlite3_clear_bindings()] to reset the bindings.
**
** ^The [sqlite3_reset(S)] interface resets the [prepared statement] S
** back to the beginning of its program.
**
** ^If the most recent call to [sqlite3_step(S)] for the
** [prepared statement] S returned [SQLITE_ROW] or [SQLITE_DONE],
** or if [sqlite3_step(S)] has never before been called on S,
** then [sqlite3_reset(S)] returns [SQLITE_OK].
**
** ^If the most recent call to [sqlite3_step(S)] for the
** [prepared statement] S indicated an error, then
** [sqlite3_reset(S)] returns an appropriate [error code].
**
** ^The [sqlite3_reset(S)] interface does not change the values
** of any [sqlite3_bind_blob|bindings] on the [prepared statement] S.
*/
SQLITE_API int SQLITE_STDCALL sqlite3_reset(sqlite3_stmt *pStmt);

/*
** CAPI3REF: Create Or Redefine SQL Functions
** KEYWORDS: {function creation routines}
** KEYWORDS: {application-defined SQL function}
** KEYWORDS: {application-defined SQL functions}
** METHOD: sqlite3
**
** ^These functions (collectively known as "function creation routines")
** are used to add SQL functions or aggregates or to redefine the behavior
** of existing SQL functions or aggregates.  The only differences between
** these routines are the text encoding expected for
** the second parameter (the name of the function being created)
** and the presence or absence of a destructor callback for
** the application data pointer.
**
** ^The first parameter is the [database connection] to which the SQL
** function is to be added.  ^If an application uses more than one database
** connection then application-defined SQL functions must be added
** to each database connection separately.
**
** ^The second parameter is the name of the SQL function to be created or
** redefined.  ^The length of the name is limited to 255 bytes in a UTF-8
** representation, exclusive of the zero-terminator.  ^Note that the name
** length limit is in UTF-8 bytes, not characters nor UTF-16 bytes.  
** ^Any attempt to create a function with a longer name
** will result in [SQLITE_MISUSE] being returned.
**
** ^The third parameter (nArg)
** is the number of arguments that the SQL function or
** aggregate takes. ^If this parameter is -1, then the SQL function or
** aggregate may take any number of arguments between 0 and the limit
** set by [sqlite3_limit]([SQLITE_LIMIT_FUNCTION_ARG]).  If the third
** parameter is less than -1 or greater than 127 then the behavior is
** undefined.
**
** ^The fourth parameter, eTextRep, specifies what
** [SQLITE_UTF8 | text encoding] this SQL function prefers for
** its parameters.  The application should set this parameter to
** [SQLITE_UTF16LE] if the function implementation invokes 
** [sqlite3_value_text16le()] on an input, or [SQLITE_UTF16BE] if the
** implementation invokes [sqlite3_value_text16be()] on an input, or
** [SQLITE_UTF16] if [sqlite3_value_text16()] is used, or [SQLITE_UTF8]
** otherwise.  ^The same SQL function may be registered multiple times using
** different preferred text encodings, with different implementations for
** each encoding.
** ^When multiple implementations of the same function are available, SQLite
** will pick the one that involves the least amount of data conversion.
**
** ^The fourth parameter may optionally be ORed with [SQLITE_DETERMINISTIC]
** to signal that the function will always return the same result given
** the same inputs within a single SQL statement.  Most SQL functions are
** deterministic.  The built-in [random()] SQL function is an example of a
** function that is not deterministic.  The SQLite query planner is able to
** perform additional optimizations on deterministic functions, so use
** of the [SQLITE_DETERMINISTIC] flag is recommended where possible.
**
** ^(The fifth parameter is an arbitrary pointer.  The implementation of the
** function can gain access to this pointer using [sqlite3_user_data()].)^
**
** ^The sixth, seventh and eighth parameters, xFunc, xStep and xFinal, are
** pointers to C-language functions that implement the SQL function or
** aggregate. ^A scalar SQL function requires an implementation of the xFunc
** callback only; NULL pointers must be passed as the xStep and xFinal
** parameters. ^An aggregate SQL function requires an implementation of xStep
** and xFinal and NULL pointer must be passed for xFunc. ^To delete an existing
** SQL function or aggregate, pass NULL pointers for all three function
** callbacks.
**
** ^(If the ninth parameter to sqlite3_create_function_v2() is not NULL,
** then it is destructor for the application data pointer. 
** The destructor is invoked when the function is deleted, either by being
** overloaded or when the database connection closes.)^
** ^The destructor is also invoked if the call to
** sqlite3_create_function_v2() fails.
** ^When the destructor callback of the tenth parameter is invoked, it
** is passed a single argument which is a copy of the application data 
** pointer which was the fifth parameter to sqlite3_create_function_v2().
**
** ^It is permitted to register multiple implementations of the same
** functions with the same name but with either differing numbers of
** arguments or differing preferred text encodings.  ^SQLite will use
** the implementation that most closely matches the way in which the
** SQL function is used.  ^A function implementation with a non-negative
** nArg parameter is a better match than a function implementation with
** a negative nArg.  ^A function where the preferred text encoding
** matches the database encoding is a better
** match than a function where the encoding is different.  
** ^A function where the encoding difference is between UTF16le and UTF16be
** is a closer match than a function where the encoding difference is
** between UTF8 and UTF16.
**
** ^Built-in functions may be overloaded by new application-defined functions.
**
** ^An application-defined function is permitted to call other
** SQLite interfaces.  However, such calls must not
** close the database connection nor finalize or reset the prepared
** statement in which the function is running.
*/
SQLITE_API int SQLITE_STDCALL sqlite3_create_function(
  sqlite3 *db,
  const char *zFunctionName,
  int nArg,
  int eTextRep,
  void *pApp,
  void (*xFunc)(sqlite3_context*,int,sqlite3_value**),
  void (*xStep)(sqlite3_context*,int,sqlite3_value**),
  void (*xFinal)(sqlite3_context*)
);
SQLITE_API int SQLITE_STDCALL sqlite3_create_function16(
  sqlite3 *db,
  const void *zFunctionName,
  int nArg,
  int eTextRep,
  void *pApp,
  void (*xFunc)(sqlite3_context*,int,sqlite3_value**),
  void (*xStep)(sqlite3_context*,int,sqlite3_value**),
  void (*xFinal)(sqlite3_context*)
);
SQLITE_API int SQLITE_STDCALL sqlite3_create_function_v2(
  sqlite3 *db,
  const char *zFunctionName,
  int nArg,
  int eTextRep,
  void *pApp,
  void (*xFunc)(sqlite3_context*,int,sqlite3_value**),
  void (*xStep)(sqlite3_context*,int,sqlite3_value**),
  void (*xFinal)(sqlite3_context*),
  void(*xDestroy)(void*)
);

/*
** CAPI3REF: Text Encodings
**
** These constant define integer codes that represent the various
** text encodings supported by SQLite.
*/
#define SQLITE_UTF8           1    /* IMP: R-37514-35566 */
#define SQLITE_UTF16LE        2    /* IMP: R-03371-37637 */
#define SQLITE_UTF16BE        3    /* IMP: R-51971-34154 */
#define SQLITE_UTF16          4    /* Use native byte order */
#define SQLITE_ANY            5    /* Deprecated */
#define SQLITE_UTF16_ALIGNED  8    /* sqlite3_create_collation only */

/*
** CAPI3REF: Function Flags
**
** These constants may be ORed together with the 
** [SQLITE_UTF8 | preferred text encoding] as the fourth argument
** to [sqlite3_create_function()], [sqlite3_create_function16()], or
** [sqlite3_create_function_v2()].
*/
#define SQLITE_DETERMINISTIC    0x800

/*
** CAPI3REF: Deprecated Functions
** DEPRECATED
**
** These functions are [deprecated].  In order to maintain
** backwards compatibility with older code, these functions continue 
** to be supported.  However, new applications should avoid
** the use of these functions.  To encourage programmers to avoid
** these functions, we will not explain what they do.
*/
#ifndef SQLITE_OMIT_DEPRECATED
SQLITE_API SQLITE_DEPRECATED int SQLITE_STDCALL sqlite3_aggregate_count(sqlite3_context*);
SQLITE_API SQLITE_DEPRECATED int SQLITE_STDCALL sqlite3_expired(sqlite3_stmt*);
SQLITE_API SQLITE_DEPRECATED int SQLITE_STDCALL sqlite3_transfer_bindings(sqlite3_stmt*, sqlite3_stmt*);
SQLITE_API SQLITE_DEPRECATED int SQLITE_STDCALL sqlite3_global_recover(void);
SQLITE_API SQLITE_DEPRECATED void SQLITE_STDCALL sqlite3_thread_cleanup(void);
SQLITE_API SQLITE_DEPRECATED int SQLITE_STDCALL sqlite3_memory_alarm(void(*)(void*,sqlite3_int64,int),
                      void*,sqlite3_int64);
#endif

/*
** CAPI3REF: Obtaining SQL Function Parameter Values
** METHOD: sqlite3_value
**
** The C-language implementation of SQL functions and aggregates uses
** this set of interface routines to access the parameter values on
** the function or aggregate.
**
** The xFunc (for scalar functions) or xStep (for aggregates) parameters
** to [sqlite3_create_function()] and [sqlite3_create_function16()]
** define callbacks that implement the SQL functions and aggregates.
** The 3rd parameter to these callbacks is an array of pointers to
** [protected sqlite3_value] objects.  There is one [sqlite3_value] object for
** each parameter to the SQL function.  These routines are used to
** extract values from the [sqlite3_value] objects.
**
** These routines work only with [protected sqlite3_value] objects.
** Any attempt to use these routines on an [unprotected sqlite3_value]
** object results in undefined behavior.
**
** ^These routines work just like the corresponding [column access functions]
** except that these routines take a single [protected sqlite3_value] object
** pointer instead of a [sqlite3_stmt*] pointer and an integer column number.
**
** ^The sqlite3_value_text16() interface extracts a UTF-16 string
** in the native byte-order of the host machine.  ^The
** sqlite3_value_text16be() and sqlite3_value_text16le() interfaces
** extract UTF-16 strings as big-endian and little-endian respectively.
**
** ^(The sqlite3_value_numeric_type() interface attempts to apply
** numeric affinity to the value.  This means that an attempt is
** made to convert the value to an integer or floating point.  If
** such a conversion is possible without loss of information (in other
** words, if the value is a string that looks like a number)
** then the conversion is performed.  Otherwise no conversion occurs.
** The [SQLITE_INTEGER | datatype] after conversion is returned.)^
**
** Please pay particular attention to the fact that the pointer returned
** from [sqlite3_value_blob()], [sqlite3_value_text()], or
** [sqlite3_value_text16()] can be invalidated by a subsequent call to
** [sqlite3_value_bytes()], [sqlite3_value_bytes16()], [sqlite3_value_text()],
** or [sqlite3_value_text16()].
**
** These routines must be called from the same thread as
** the SQL function that supplied the [sqlite3_value*] parameters.
*/
SQLITE_API const void *SQLITE_STDCALL sqlite3_value_blob(sqlite3_value*);
SQLITE_API int SQLITE_STDCALL sqlite3_value_bytes(sqlite3_value*);
SQLITE_API int SQLITE_STDCALL sqlite3_value_bytes16(sqlite3_value*);
SQLITE_API double SQLITE_STDCALL sqlite3_value_double(sqlite3_value*);
SQLITE_API int SQLITE_STDCALL sqlite3_value_int(sqlite3_value*);
SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_value_int64(sqlite3_value*);
SQLITE_API const unsigned char *SQLITE_STDCALL sqlite3_value_text(sqlite3_value*);
SQLITE_API const void *SQLITE_STDCALL sqlite3_value_text16(sqlite3_value*);
SQLITE_API const void *SQLITE_STDCALL sqlite3_value_text16le(sqlite3_value*);
SQLITE_API const void *SQLITE_STDCALL sqlite3_value_text16be(sqlite3_value*);
SQLITE_API int SQLITE_STDCALL sqlite3_value_type(sqlite3_value*);
SQLITE_API int SQLITE_STDCALL sqlite3_value_numeric_type(sqlite3_value*);

/*
** CAPI3REF: Obtain Aggregate Function Context
** METHOD: sqlite3_context
**
** Implementations of aggregate SQL functions use this
** routine to allocate memory for storing their state.
**
** ^The first time the sqlite3_aggregate_context(C,N) routine is called 
** for a particular aggregate function, SQLite
** allocates N of memory, zeroes out that memory, and returns a pointer
** to the new memory. ^On second and subsequent calls to
** sqlite3_aggregate_context() for the same aggregate function instance,
** the same buffer is returned.  Sqlite3_aggregate_context() is normally
** called once for each invocation of the xStep callback and then one
** last time when the xFinal callback is invoked.  ^(When no rows match
** an aggregate query, the xStep() callback of the aggregate function
** implementation is never called and xFinal() is called exactly once.
** In those cases, sqlite3_aggregate_context() might be called for the
** first time from within xFinal().)^
**
** ^The sqlite3_aggregate_context(C,N) routine returns a NULL pointer 
** when first called if N is less than or equal to zero or if a memory
** allocate error occurs.
**
** ^(The amount of space allocated by sqlite3_aggregate_context(C,N) is
** determined by the N parameter on first successful call.  Changing the
** value of N in subsequent call to sqlite3_aggregate_context() within
** the same aggregate function instance will not resize the memory
** allocation.)^  Within the xFinal callback, it is customary to set
** N=0 in calls to sqlite3_aggregate_context(C,N) so that no 
** pointless memory allocations occur.
**
** ^SQLite automatically frees the memory allocated by 
** sqlite3_aggregate_context() when the aggregate query concludes.
**
** The first parameter must be a copy of the
** [sqlite3_context | SQL function context] that is the first parameter
** to the xStep or xFinal callback routine that implements the aggregate
** function.
**
** This routine must be called from the same thread in which
** the aggregate SQL function is running.
*/
SQLITE_API void *SQLITE_STDCALL sqlite3_aggregate_context(sqlite3_context*, int nBytes);

/*
** CAPI3REF: User Data For Functions
** METHOD: sqlite3_context
**
** ^The sqlite3_user_data() interface returns a copy of
** the pointer that was the pUserData parameter (the 5th parameter)
** of the [sqlite3_create_function()]
** and [sqlite3_create_function16()] routines that originally
** registered the application defined function.
**
** This routine must be called from the same thread in which
** the application-defined function is running.
*/
SQLITE_API void *SQLITE_STDCALL sqlite3_user_data(sqlite3_context*);

/*
** CAPI3REF: Database Connection For Functions
** METHOD: sqlite3_context
**
** ^The sqlite3_context_db_handle() interface returns a copy of
** the pointer to the [database connection] (the 1st parameter)
** of the [sqlite3_create_function()]
** and [sqlite3_create_function16()] routines that originally
** registered the application defined function.
*/
SQLITE_API sqlite3 *SQLITE_STDCALL sqlite3_context_db_handle(sqlite3_context*);

/*
** CAPI3REF: Function Auxiliary Data
** METHOD: sqlite3_context
**
** These functions may be used by (non-aggregate) SQL functions to
** associate metadata with argument values. If the same value is passed to
** multiple invocations of the same SQL function during query execution, under
** some circumstances the associated metadata may be preserved. An example
** of where this might be useful is in a regular-expression matching
** function. The compiled version of the regular expression can be stored as
** metadata associated with the pattern string. 
** Then as long as the pattern string remains the same,
** the compiled regular expression can be reused on multiple
** invocations of the same function.
**
** ^The sqlite3_get_auxdata() interface returns a pointer to the metadata
** associated by the sqlite3_set_auxdata() function with the Nth argument
** value to the application-defined function. ^If there is no metadata
** associated with the function argument, this sqlite3_get_auxdata() interface
** returns a NULL pointer.
**
** ^The sqlite3_set_auxdata(C,N,P,X) interface saves P as metadata for the N-th
** argument of the application-defined function. ^Subsequent
** calls to sqlite3_get_auxdata(C,N) return P from the most recent
** sqlite3_set_auxdata(C,N,P,X) call if the metadata is still valid or
** NULL if the metadata has been discarded.
** ^After each call to sqlite3_set_auxdata(C,N,P,X) where X is not NULL,
** SQLite will invoke the destructor function X with parameter P exactly
** once, when the metadata is discarded.
** SQLite is free to discard the metadata at any time, including: <ul>
** <li> when the corresponding function parameter changes, or
** <li> when [sqlite3_reset()] or [sqlite3_finalize()] is called for the
** SQL statement, or
** <li> when sqlite3_set_auxdata() is invoked again on the same parameter, or
** <li> during the original sqlite3_set_auxdata() call when a memory 
** allocation error occurs. </ul>)^
**
** Note the last bullet in particular. The destructor X in 
** sqlite3_set_auxdata(C,N,P,X) might be called immediately, before the
** sqlite3_set_auxdata() interface even returns. Hence sqlite3_set_auxdata()
** should be called near the end of the function implementation and the
** function implementation should not make any use of P after
** sqlite3_set_auxdata() has been called.
**
** ^(In practice, metadata is preserved between function calls for
** function parameters that are compile-time constants, including literal
** values and [parameters] and expressions composed from the same.)^
**
** These routines must be called from the same thread in which
** the SQL function is running.
*/
SQLITE_API void *SQLITE_STDCALL sqlite3_get_auxdata(sqlite3_context*, int N);
SQLITE_API void SQLITE_STDCALL sqlite3_set_auxdata(sqlite3_context*, int N, void*, void (*)(void*));

/*
** CAPI3REF: Constants Defining Special Destructor Behavior
**
** These are special values for the destructor that is passed in as the
** final argument to routines like [sqlite3_result_blob()].  ^If the destructor
** argument is SQLITE_STATIC, it means that the content pointer is constant
** and will never change.  It does not need to be destroyed.  ^The
** SQLITE_TRANSIENT value means that the content will likely change in
** the near future and that SQLite should make its own private copy of
** the content before returning.
**
** The typedef is necessary to work around problems in certain
** C++ compilers.
*/
typedef void (*sqlite3_destructor_type)(void*);
#define SQLITE_STATIC      ((sqlite3_destructor_type)0)
#define SQLITE_TRANSIENT   ((sqlite3_destructor_type)-1)

/*
** CAPI3REF: Setting The Result Of An SQL Function
** METHOD: sqlite3_context
**
** These routines are used by the xFunc or xFinal callbacks that
** implement SQL functions and aggregates.  See
** [sqlite3_create_function()] and [sqlite3_create_function16()]
** for additional information.
**
** These functions work very much like the [parameter binding] family of
** functions used to bind values to host parameters in prepared statements.
** Refer to the [SQL parameter] documentation for additional information.
**
** ^The sqlite3_result_blob() interface sets the result from
** an application-defined function to be the BLOB whose content is pointed
** to by the second parameter and which is N bytes long where N is the
** third parameter.
**
** ^The sqlite3_result_zeroblob() interfaces set the result of
** the application-defined function to be a BLOB containing all zero
** bytes and N bytes in size, where N is the value of the 2nd parameter.
**
** ^The sqlite3_result_double() interface sets the result from
** an application-defined function to be a floating point value specified
** by its 2nd argument.
**
** ^The sqlite3_result_error() and sqlite3_result_error16() functions
** cause the implemented SQL function to throw an exception.
** ^SQLite uses the string pointed to by the
** 2nd parameter of sqlite3_result_error() or sqlite3_result_error16()
** as the text of an error message.  ^SQLite interprets the error
** message string from sqlite3_result_error() as UTF-8. ^SQLite
** interprets the string from sqlite3_result_error16() as UTF-16 in native
** byte order.  ^If the third parameter to sqlite3_result_error()
** or sqlite3_result_error16() is negative then SQLite takes as the error
** message all text up through the first zero character.
** ^If the third parameter to sqlite3_result_error() or
** sqlite3_result_error16() is non-negative then SQLite takes that many
** bytes (not characters) from the 2nd parameter as the error message.
** ^The sqlite3_result_error() and sqlite3_result_error16()
** routines make a private copy of the error message text before
** they return.  Hence, the calling function can deallocate or
** modify the text after they return without harm.
** ^The sqlite3_result_error_code() function changes the error code
** returned by SQLite as a result of an error in a function.  ^By default,
** the error code is SQLITE_ERROR.  ^A subsequent call to sqlite3_result_error()
** or sqlite3_result_error16() resets the error code to SQLITE_ERROR.
**
** ^The sqlite3_result_error_toobig() interface causes SQLite to throw an
** error indicating that a string or BLOB is too long to represent.
**
** ^The sqlite3_result_error_nomem() interface causes SQLite to throw an
** error indicating that a memory allocation failed.
**
** ^The sqlite3_result_int() interface sets the return value
** of the application-defined function to be the 32-bit signed integer
** value given in the 2nd argument.
** ^The sqlite3_result_int64() interface sets the return value
** of the application-defined function to be the 64-bit signed integer
** value given in the 2nd argument.
**
** ^The sqlite3_result_null() interface sets the return value
** of the application-defined function to be NULL.
**
** ^The sqlite3_result_text(), sqlite3_result_text16(),
** sqlite3_result_text16le(), and sqlite3_result_text16be() interfaces
** set the return value of the application-defined function to be
** a text string which is represented as UTF-8, UTF-16 native byte order,
** UTF-16 little endian, or UTF-16 big endian, respectively.
** ^The sqlite3_result_text64() interface sets the return value of an
** application-defined function to be a text string in an encoding
** specified by the fifth (and last) parameter, which must be one
** of [SQLITE_UTF8], [SQLITE_UTF16], [SQLITE_UTF16BE], or [SQLITE_UTF16LE].
** ^SQLite takes the text result from the application from
** the 2nd parameter of the sqlite3_result_text* interfaces.
** ^If the 3rd parameter to the sqlite3_result_text* interfaces
** is negative, then SQLite takes result text from the 2nd parameter
** through the first zero character.
** ^If the 3rd parameter to the sqlite3_result_text* interfaces
** is non-negative, then as many bytes (not characters) of the text
** pointed to by the 2nd parameter are taken as the application-defined
** function result.  If the 3rd parameter is non-negative, then it
** must be the byte offset into the string where the NUL terminator would
** appear if the string where NUL terminated.  If any NUL characters occur
** in the string at a byte offset that is less than the value of the 3rd
** parameter, then the resulting string will contain embedded NULs and the
** result of expressions operating on strings with embedded NULs is undefined.
** ^If the 4th parameter to the sqlite3_result_text* interfaces
** or sqlite3_result_blob is a non-NULL pointer, then SQLite calls that
** function as the destructor on the text or BLOB result when it has
** finished using that result.
** ^If the 4th parameter to the sqlite3_result_text* interfaces or to
** sqlite3_result_blob is the special constant SQLITE_STATIC, then SQLite
** assumes that the text or BLOB result is in constant space and does not
** copy the content of the parameter nor call a destructor on the content
** when it has finished using that result.
** ^If the 4th parameter to the sqlite3_result_text* interfaces
** or sqlite3_result_blob is the special constant SQLITE_TRANSIENT
** then SQLite makes a copy of the result into space obtained from
** from [sqlite3_malloc()] before it returns.
**
** ^The sqlite3_result_value() interface sets the result of
** the application-defined function to be a copy the
** [unprotected sqlite3_value] object specified by the 2nd parameter.  ^The
** sqlite3_result_value() interface makes a copy of the [sqlite3_value]
** so that the [sqlite3_value] specified in the parameter may change or
** be deallocated after sqlite3_result_value() returns without harm.
** ^A [protected sqlite3_value] object may always be used where an
** [unprotected sqlite3_value] object is required, so either
** kind of [sqlite3_value] object can be used with this interface.
**
** If these routines are called from within the different thread
** than the one containing the application-defined function that received
** the [sqlite3_context] pointer, the results are undefined.
*/
SQLITE_API void SQLITE_STDCALL sqlite3_result_blob(sqlite3_context*, const void*, int, void(*)(void*));
SQLITE_API void SQLITE_STDCALL sqlite3_result_blob64(sqlite3_context*,const void*,
                           sqlite3_uint64,void(*)(void*));
SQLITE_API void SQLITE_STDCALL sqlite3_result_double(sqlite3_context*, double);
SQLITE_API void SQLITE_STDCALL sqlite3_result_error(sqlite3_context*, const char*, int);
SQLITE_API void SQLITE_STDCALL sqlite3_result_error16(sqlite3_context*, const void*, int);
SQLITE_API void SQLITE_STDCALL sqlite3_result_error_toobig(sqlite3_context*);
SQLITE_API void SQLITE_STDCALL sqlite3_result_error_nomem(sqlite3_context*);
SQLITE_API void SQLITE_STDCALL sqlite3_result_error_code(sqlite3_context*, int);
SQLITE_API void SQLITE_STDCALL sqlite3_result_int(sqlite3_context*, int);
SQLITE_API void SQLITE_STDCALL sqlite3_result_int64(sqlite3_context*, sqlite3_int64);
SQLITE_API void SQLITE_STDCALL sqlite3_result_null(sqlite3_context*);
SQLITE_API void SQLITE_STDCALL sqlite3_result_text(sqlite3_context*, const char*, int, void(*)(void*));
SQLITE_API void SQLITE_STDCALL sqlite3_result_text64(sqlite3_context*, const char*,sqlite3_uint64,
                           void(*)(void*), unsigned char encoding);
SQLITE_API void SQLITE_STDCALL sqlite3_result_text16(sqlite3_context*, const void*, int, void(*)(void*));
SQLITE_API void SQLITE_STDCALL sqlite3_result_text16le(sqlite3_context*, const void*, int,void(*)(void*));
SQLITE_API void SQLITE_STDCALL sqlite3_result_text16be(sqlite3_context*, const void*, int,void(*)(void*));
SQLITE_API void SQLITE_STDCALL sqlite3_result_value(sqlite3_context*, sqlite3_value*);
SQLITE_API void SQLITE_STDCALL sqlite3_result_zeroblob(sqlite3_context*, int n);

/*
** CAPI3REF: Define New Collating Sequences
** METHOD: sqlite3
**
** ^These functions add, remove, or modify a [collation] associated
** with the [database connection] specified as the first argument.
**
** ^The name of the collation is a UTF-8 string
** for sqlite3_create_collation() and sqlite3_create_collation_v2()
** and a UTF-16 string in native byte order for sqlite3_create_collation16().
** ^Collation names that compare equal according to [sqlite3_strnicmp()] are
** considered to be the same name.
**
** ^(The third argument (eTextRep) must be one of the constants:
** <ul>
** <li> [SQLITE_UTF8],
** <li> [SQLITE_UTF16LE],
** <li> [SQLITE_UTF16BE],
** <li> [SQLITE_UTF16], or
** <li> [SQLITE_UTF16_ALIGNED].
** </ul>)^
** ^The eTextRep argument determines the encoding of strings passed
** to the collating function callback, xCallback.
** ^The [SQLITE_UTF16] and [SQLITE_UTF16_ALIGNED] values for eTextRep
** force strings to be UTF16 with native byte order.
** ^The [SQLITE_UTF16_ALIGNED] value for eTextRep forces strings to begin
** on an even byte address.
**
** ^The fourth argument, pArg, is an application data pointer that is passed
** through as the first argument to the collating function callback.
**
** ^The fifth argument, xCallback, is a pointer to the collating function.
** ^Multiple collating functions can be registered using the same name but
** with different eTextRep parameters and SQLite will use whichever
** function requires the least amount of data transformation.
** ^If the xCallback argument is NULL then the collating function is
** deleted. ^When all collating functions having the same name are deleted,
** that collation is no longer usable.
**
** ^The collating function callback is invoked with a copy of the pArg 
** application data pointer and with two strings in the encoding specified
** by the eTextRep argument. The collating function must return an
** integer that is negative, zero, or positive
** if the first string is less than, equal to, or greater than the second,
** respectively. A collating function must always return the same answer
** given the same inputs. If two or more collating functions are registered
** to the same collation name (using different eTextRep values) then all
** must give an equivalent answer when invoked with equivalent strings.
** The collating function must obey the following properties for all
** strings A, B, and C:
**
** <ol>
** <li> If A==B then B==A.
** <li> If A==B and B==C then A==C.
** <li> If A&lt;B THEN B&gt;A.
** <li> If A&lt;B and B&lt;C then A&lt;C.
** </ol>
**
** If a collating function fails any of the above constraints and that
** collating function is registered and used, then the behavior of SQLite
** is undefined.
**
** ^The sqlite3_create_collation_v2() works like sqlite3_create_collation()
** with the addition that the xDestroy callback is invoked on pArg when
** the collating function is deleted.
** ^Collating functions are deleted when they are overridden by later
** calls to the collation creation functions or when the
** [database connection] is closed using [sqlite3_close()].
**
** ^The xDestroy callback is not called if the 
** sqlite3_create_collation_v2() function fails. Applications that invoke
** sqlite3_create_collation_v2() with a non-NULL xDestroy argument should 
** check the return code and dispose of the application data pointer
** themselves rather than expecting SQLite to deal with it for them.
** This is different from every other SQLite interface. The inconsistency 
** is unfortunate but cannot be changed without breaking backwards 
** compatibility.
**
** See also: [sqlite3_collation_needed()] and [sqlite3_collation_needed16()].
*/
SQLITE_API int SQLITE_STDCALL sqlite3_create_collation(
 sqlite3*, 
 const char *zName, 
 int eTextRep, 
 void *pArg,
 int(*xCompare)(void*,int,const void*,int,const void*)
);
SQLITE_API int SQLITE_STDCALL sqlite3_create_collation_v2(
 sqlite3*, 
 const char *zName, 
 int eTextRep, 
 void *pArg,
 int(*xCompare)(void*,int,const void*,int,const void*),
 void(*xDestroy)(void*)
);
SQLITE_API int SQLITE_STDCALL sqlite3_create_collation16(
 sqlite3*, 
 const void *zName,
 int eTextRep, 
 void *pArg,
 int(*xCompare)(void*,int,const void*,int,const void*)
);

/*
** CAPI3REF: Collation Needed Callbacks
** METHOD: sqlite3
**
** ^To avoid having to register all collation sequences before a database
** can be used, a single callback function may be registered with the
** [database connection] to be invoked whenever an undefined collation
** sequence is required.
**
** ^If the function is registered using the sqlite3_collation_needed() API,
** then it is passed the names of undefined collation sequences as strings
** encoded in UTF-8. ^If sqlite3_collation_needed16() is used,
** the names are passed as UTF-16 in machine native byte order.
** ^A call to either function replaces the existing collation-needed callback.
**
** ^(When the callback is invoked, the first argument passed is a copy
** of the second argument to sqlite3_collation_needed() or
** sqlite3_collation_needed16().  The second argument is the database
** connection.  The third argument is one of [SQLITE_UTF8], [SQLITE_UTF16BE],
** or [SQLITE_UTF16LE], indicating the most desirable form of the collation
** sequence function required.  The fourth parameter is the name of the
** required collation sequence.)^
**
** The callback function should register the desired collation using
** [sqlite3_create_collation()], [sqlite3_create_collation16()], or
** [sqlite3_create_collation_v2()].
*/
SQLITE_API int SQLITE_STDCALL sqlite3_collation_needed(
  sqlite3*, 
  void*, 
  void(*)(void*,sqlite3*,int eTextRep,const char*)
);
SQLITE_API int SQLITE_STDCALL sqlite3_collation_needed16(
  sqlite3*, 
  void*,
  void(*)(void*,sqlite3*,int eTextRep,const void*)
);

#ifdef SQLITE_HAS_CODEC
/*
** Specify the key for an encrypted database.  This routine should be
** called right after sqlite3_open().
**
** The code to implement this API is not available in the public release
** of SQLite.
*/
SQLITE_API int SQLITE_STDCALL sqlite3_key(
  sqlite3 *db,                   /* Database to be rekeyed */
  const void *pKey, int nKey     /* The key */
);
SQLITE_API int SQLITE_STDCALL sqlite3_key_v2(
  sqlite3 *db,                   /* Database to be rekeyed */
  const char *zDbName,           /* Name of the database */
  const void *pKey, int nKey     /* The key */
);

/*
** Change the key on an open database.  If the current database is not
** encrypted, this routine will encrypt it.  If pNew==0 or nNew==0, the
** database is decrypted.
**
** The code to implement this API is not available in the public release
** of SQLite.
*/
SQLITE_API int SQLITE_STDCALL sqlite3_rekey(
  sqlite3 *db,                   /* Database to be rekeyed */
  const void *pKey, int nKey     /* The new key */
);
SQLITE_API int SQLITE_STDCALL sqlite3_rekey_v2(
  sqlite3 *db,                   /* Database to be rekeyed */
  const char *zDbName,           /* Name of the database */
  const void *pKey, int nKey     /* The new key */
);

/*
** Specify the activation key for a SEE database.  Unless 
** activated, none of the SEE routines will work.
*/
SQLITE_API void SQLITE_STDCALL sqlite3_activate_see(
  const char *zPassPhrase        /* Activation phrase */
);
#endif

#ifdef SQLITE_ENABLE_CEROD
/*
** Specify the activation key for a CEROD database.  Unless 
** activated, none of the CEROD routines will work.
*/
SQLITE_API void SQLITE_STDCALL sqlite3_activate_cerod(
  const char *zPassPhrase        /* Activation phrase */
);
#endif

/*
** CAPI3REF: Suspend Execution For A Short Time
**
** The sqlite3_sleep() function causes the current thread to suspend execution
** for at least a number of milliseconds specified in its parameter.
**
** If the operating system does not support sleep requests with
** millisecond time resolution, then the time will be rounded up to
** the nearest second. The number of milliseconds of sleep actually
** requested from the operating system is returned.
**
** ^SQLite implements this interface by calling the xSleep()
** method of the default [sqlite3_vfs] object.  If the xSleep() method
** of the default VFS is not implemented correctly, or not implemented at
** all, then the behavior of sqlite3_sleep() may deviate from the description
** in the previous paragraphs.
*/
SQLITE_API int SQLITE_STDCALL sqlite3_sleep(int);

/*
** CAPI3REF: Name Of The Folder Holding Temporary Files
**
** ^(If this global variable is made to point to a string which is
** the name of a folder (a.k.a. directory), then all temporary files
** created by SQLite when using a built-in [sqlite3_vfs | VFS]
** will be placed in that directory.)^ ^If this variable
** is a NULL pointer, then SQLite performs a search for an appropriate
** temporary file directory.
**
** Applications are strongly discouraged from using this global variable.
** It is required to set a temporary folder on Windows Runtime (WinRT).
** But for all other platforms, it is highly recommended that applications
** neither read nor write this variable. This global variable is a relic
** that exists for backwards compatibility of legacy applications and should
** be avoided in new projects.
**
** It is not safe to read or modify this variable in more than one
** thread at a time. It is not safe to read or modify this variable
** if a [database connection] is being used at the same time in a separate
** thread.
** It is intended that this variable be set once
** as part of process initialization and before any SQLite interface
** routines have been called and that this variable remain unchanged
** thereafter.
**
** ^The [temp_store_directory pragma] may modify this variable and cause
** it to point to memory obtained from [sqlite3_malloc]. ^Furthermore,
** the [temp_store_directory pragma] always assumes that any string
** that this variable points to is held in memory obtained from 
** [sqlite3_malloc] and the pragma may attempt to free that memory
** using [sqlite3_free].
** Hence, if this variable is modified directly, either it should be
** made NULL or made to point to memory obtained from [sqlite3_malloc]
** or else the use of the [temp_store_directory pragma] should be avoided.
** Except when requested by the [temp_store_directory pragma], SQLite
** does not free the memory that sqlite3_temp_directory points to. If
** the application wants that memory to be freed, it must do
** so itself, taking care to only do so after all [database connection]
** objects have been destroyed.
**
** Note to Windows Runtime users: The temporary directory must be set
** prior to calling [sqlite3_open] or [sqlite3_open_v2]. Otherwise, various
** features that require the use of temporary files may fail. Here is an
** example of how to do this using C++ with the Windows Runtime:
**
** <blockquote><pre>
** LPCWSTR zPath = Windows::Storage::ApplicationData::Current->
** &nbsp; TemporaryFolder->Path->Data();
** char zPathBuf&#91;MAX_PATH + 1&#93;;
** memset(zPathBuf, 0, sizeof(zPathBuf));
** WideCharToMultiByte(CP_UTF8, 0, zPath, -1, zPathBuf, sizeof(zPathBuf),
** &nbsp; NULL, NULL);
** sqlite3_temp_directory = sqlite3_mprintf("%s", zPathBuf);
** </pre></blockquote>
*/
SQLITE_API SQLITE_EXTERN char *sqlite3_temp_directory;

/*
** CAPI3REF: Name Of The Folder Holding Database Files
**
** ^(If this global variable is made to point to a string which is
** the name of a folder (a.k.a. directory), then all database files
** specified with a relative pathname and created or accessed by
** SQLite when using a built-in windows [sqlite3_vfs | VFS] will be assumed
** to be relative to that directory.)^ ^If this variable is a NULL
** pointer, then SQLite assumes that all database files specified
** with a relative pathname are relative to the current directory
** for the process.  Only the windows VFS makes use of this global
** variable; it is ignored by the unix VFS.
**
** Changing the value of this variable while a database connection is
** open can result in a corrupt database.
**
** It is not safe to read or modify this variable in more than one
** thread at a time.  It is not safe to read or modify this variable
** if a [database connection] is being used at the same time in a separate
** thread.
** It is intended that this variable be set once
** as part of process initialization and before any SQLite interface
** routines have been called and that this variable remain unchanged
** thereafter.
**
** ^The [data_store_directory pragma] may modify this variable and cause
** it to point to memory obtained from [sqlite3_malloc].  ^Furthermore,
** the [data_store_directory pragma] always assumes that any string
** that this variable points to is held in memory obtained from 
** [sqlite3_malloc] and the pragma may attempt to free that memory
** using [sqlite3_free].
** Hence, if this variable is modified directly, either it should be
** made NULL or made to point to memory obtained from [sqlite3_malloc]
** or else the use of the [data_store_directory pragma] should be avoided.
*/
SQLITE_API SQLITE_EXTERN char *sqlite3_data_directory;

/*
** CAPI3REF: Test For Auto-Commit Mode
** KEYWORDS: {autocommit mode}
** METHOD: sqlite3
**
** ^The sqlite3_get_autocommit() interface returns non-zero or
** zero if the given database connection is or is not in autocommit mode,
** respectively.  ^Autocommit mode is on by default.
** ^Autocommit mode is disabled by a [BEGIN] statement.
** ^Autocommit mode is re-enabled by a [COMMIT] or [ROLLBACK].
**
** If certain kinds of errors occur on a statement within a multi-statement
** transaction (errors including [SQLITE_FULL], [SQLITE_IOERR],
** [SQLITE_NOMEM], [SQLITE_BUSY], and [SQLITE_INTERRUPT]) then the
** transaction might be rolled back automatically.  The only way to
** find out whether SQLite automatically rolled back the transaction after
** an error is to use this function.
**
** If another thread changes the autocommit status of the database
** connection while this routine is running, then the return value
** is undefined.
*/
SQLITE_API int SQLITE_STDCALL sqlite3_get_autocommit(sqlite3*);

/*
** CAPI3REF: Find The Database Handle Of A Prepared Statement
** METHOD: sqlite3_stmt
**
** ^The sqlite3_db_handle interface returns the [database connection] handle
** to which a [prepared statement] belongs.  ^The [database connection]
** returned by sqlite3_db_handle is the same [database connection]
** that was the first argument
** to the [sqlite3_prepare_v2()] call (or its variants) that was used to
** create the statement in the first place.
*/
SQLITE_API sqlite3 *SQLITE_STDCALL sqlite3_db_handle(sqlite3_stmt*);

/*
** CAPI3REF: Return The Filename For A Database Connection
** METHOD: sqlite3
**
** ^The sqlite3_db_filename(D,N) interface returns a pointer to a filename
** associated with database N of connection D.  ^The main database file
** has the name "main".  If there is no attached database N on the database
** connection D, or if database N is a temporary or in-memory database, then
** a NULL pointer is returned.
**
** ^The filename returned by this function is the output of the
** xFullPathname method of the [VFS].  ^In other words, the filename
** will be an absolute pathname, even if the filename used
** to open the database originally was a URI or relative pathname.
*/
SQLITE_API const char *SQLITE_STDCALL sqlite3_db_filename(sqlite3 *db, const char *zDbName);

/*
** CAPI3REF: Determine if a database is read-only
** METHOD: sqlite3
**
** ^The sqlite3_db_readonly(D,N) interface returns 1 if the database N
** of connection D is read-only, 0 if it is read/write, or -1 if N is not
** the name of a database on connection D.
*/
SQLITE_API int SQLITE_STDCALL sqlite3_db_readonly(sqlite3 *db, const char *zDbName);

/*
** CAPI3REF: Find the next prepared statement
** METHOD: sqlite3
**
** ^This interface returns a pointer to the next [prepared statement] after
** pStmt associated with the [database connection] pDb.  ^If pStmt is NULL
** then this interface returns a pointer to the first prepared statement
** associated with the database connection pDb.  ^If no prepared statement
** satisfies the conditions of this routine, it returns NULL.
**
** The [database connection] pointer D in a call to
** [sqlite3_next_stmt(D,S)] must refer to an open database
** connection and in particular must not be a NULL pointer.
*/
SQLITE_API sqlite3_stmt *SQLITE_STDCALL sqlite3_next_stmt(sqlite3 *pDb, sqlite3_stmt *pStmt);

/*
** CAPI3REF: Commit And Rollback Notification Callbacks
** METHOD: sqlite3
**
** ^The sqlite3_commit_hook() interface registers a callback
** function to be invoked whenever a transaction is [COMMIT | committed].
** ^Any callback set by a previous call to sqlite3_commit_hook()
** for the same database connection is overridden.
** ^The sqlite3_rollback_hook() interface registers a callback
** function to be invoked whenever a transaction is [ROLLBACK | rolled back].
** ^Any callback set by a previous call to sqlite3_rollback_hook()
** for the same database connection is overridden.
** ^The pArg argument is passed through to the callback.
** ^If the callback on a commit hook function returns non-zero,
** then the commit is converted into a rollback.
**
** ^The sqlite3_commit_hook(D,C,P) and sqlite3_rollback_hook(D,C,P) functions
** return the P argument from the previous call of the same function
** on the same [database connection] D, or NULL for
** the first call for each function on D.
**
** The commit and rollback hook callbacks are not reentrant.
** The callback implementation must not do anything that will modify
** the database connection that invoked the callback.  Any actions
** to modify the database connection must be deferred until after the
** completion of the [sqlite3_step()] call that triggered the commit
** or rollback hook in the first place.
** Note that running any other SQL statements, including SELECT statements,
** or merely calling [sqlite3_prepare_v2()] and [sqlite3_step()] will modify
** the database connections for the meaning of "modify" in this paragraph.
**
** ^Registering a NULL function disables the callback.
**
** ^When the commit hook callback routine returns zero, the [COMMIT]
** operation is allowed to continue normally.  ^If the commit hook
** returns non-zero, then the [COMMIT] is converted into a [ROLLBACK].
** ^The rollback hook is invoked on a rollback that results from a commit
** hook returning non-zero, just as it would be with any other rollback.
**
** ^For the purposes of this API, a transaction is said to have been
** rolled back if an explicit "ROLLBACK" statement is executed, or
** an error or constraint causes an implicit rollback to occur.
** ^The rollback callback is not invoked if a transaction is
** automatically rolled back because the database connection is closed.
**
** See also the [sqlite3_update_hook()] interface.
*/
SQLITE_API void *SQLITE_STDCALL sqlite3_commit_hook(sqlite3*, int(*)(void*), void*);
SQLITE_API void *SQLITE_STDCALL sqlite3_rollback_hook(sqlite3*, void(*)(void *), void*);

/*
** CAPI3REF: Data Change Notification Callbacks
** METHOD: sqlite3
**
** ^The sqlite3_update_hook() interface registers a callback function
** with the [database connection] identified by the first argument
** to be invoked whenever a row is updated, inserted or deleted in
** a rowid table.
** ^Any callback set by a previous call to this function
** for the same database connection is overridden.
**
** ^The second argument is a pointer to the function to invoke when a
** row is updated, inserted or deleted in a rowid table.
** ^The first argument to the callback is a copy of the third argument
** to sqlite3_update_hook().
** ^The second callback argument is one of [SQLITE_INSERT], [SQLITE_DELETE],
** or [SQLITE_UPDATE], depending on the operation that caused the callback
** to be invoked.
** ^The third and fourth arguments to the callback contain pointers to the
** database and table name containing the affected row.
** ^The final callback parameter is the [rowid] of the row.
** ^In the case of an update, this is the [rowid] after the update takes place.
**
** ^(The update hook is not invoked when internal system tables are
** modified (i.e. sqlite_master and sqlite_sequence).)^
** ^The update hook is not invoked when [WITHOUT ROWID] tables are modified.
**
** ^In the current implementation, the update hook
** is not invoked when duplication rows are deleted because of an
** [ON CONFLICT | ON CONFLICT REPLACE] clause.  ^Nor is the update hook
** invoked when rows are deleted using the [truncate optimization].
** The exceptions defined in this paragraph might change in a future
** release of SQLite.
**
** The update hook implementation must not do anything that will modify
** the database connection that invoked the update hook.  Any actions
** to modify the database connection must be deferred until after the
** completion of the [sqlite3_step()] call that triggered the update hook.
** Note that [sqlite3_prepare_v2()] and [sqlite3_step()] both modify their
** database connections for the meaning of "modify" in this paragraph.
**
** ^The sqlite3_update_hook(D,C,P) function
** returns the P argument from the previous call
** on the same [database connection] D, or NULL for
** the first call on D.
**
** See also the [sqlite3_commit_hook()] and [sqlite3_rollback_hook()]
** interfaces.
*/
SQLITE_API void *SQLITE_STDCALL sqlite3_update_hook(
  sqlite3*, 
  void(*)(void *,int ,char const *,char const *,sqlite3_int64),
  void*
);

/*
** CAPI3REF: Enable Or Disable Shared Pager Cache
**
** ^(This routine enables or disables the sharing of the database cache
** and schema data structures between [database connection | connections]
** to the same database. Sharing is enabled if the argument is true
** and disabled if the argument is false.)^
**
** ^Cache sharing is enabled and disabled for an entire process.
** This is a change as of SQLite version 3.5.0. In prior versions of SQLite,
** sharing was enabled or disabled for each thread separately.
**
** ^(The cache sharing mode set by this interface effects all subsequent
** calls to [sqlite3_open()], [sqlite3_open_v2()], and [sqlite3_open16()].
** Existing database connections continue use the sharing mode
** that was in effect at the time they were opened.)^
**
** ^(This routine returns [SQLITE_OK] if shared cache was enabled or disabled
** successfully.  An [error code] is returned otherwise.)^
**
** ^Shared cache is disabled by default. But this might change in
** future releases of SQLite.  Applications that care about shared
** cache setting should set it explicitly.
**
** Note: This method is disabled on MacOS X 10.7 and iOS version 5.0
** and will always return SQLITE_MISUSE. On those systems, 
** shared cache mode should be enabled per-database connection via 
** [sqlite3_open_v2()] with [SQLITE_OPEN_SHAREDCACHE].
**
** This interface is threadsafe on processors where writing a
** 32-bit integer is atomic.
**
** See Also:  [SQLite Shared-Cache Mode]
*/
SQLITE_API int SQLITE_STDCALL sqlite3_enable_shared_cache(int);

/*
** CAPI3REF: Attempt To Free Heap Memory
**
** ^The sqlite3_release_memory() interface attempts to free N bytes
** of heap memory by deallocating non-essential memory allocations
** held by the database library.   Memory used to cache database
** pages to improve performance is an example of non-essential memory.
** ^sqlite3_release_memory() returns the number of bytes actually freed,
** which might be more or less than the amount requested.
** ^The sqlite3_release_memory() routine is a no-op returning zero
** if SQLite is not compiled with [SQLITE_ENABLE_MEMORY_MANAGEMENT].
**
** See also: [sqlite3_db_release_memory()]
*/
SQLITE_API int SQLITE_STDCALL sqlite3_release_memory(int);

/*
** CAPI3REF: Free Memory Used By A Database Connection
** METHOD: sqlite3
**
** ^The sqlite3_db_release_memory(D) interface attempts to free as much heap
** memory as possible from database connection D. Unlike the
** [sqlite3_release_memory()] interface, this interface is in effect even
** when the [SQLITE_ENABLE_MEMORY_MANAGEMENT] compile-time option is
** omitted.
**
** See also: [sqlite3_release_memory()]
*/
SQLITE_API int SQLITE_STDCALL sqlite3_db_release_memory(sqlite3*);

/*
** CAPI3REF: Impose A Limit On Heap Size
**
** ^The sqlite3_soft_heap_limit64() interface sets and/or queries the
** soft limit on the amount of heap memory that may be allocated by SQLite.
** ^SQLite strives to keep heap memory utilization below the soft heap
** limit by reducing the number of pages held in the page cache
** as heap memory usages approaches the limit.
** ^The soft heap limit is "soft" because even though SQLite strives to stay
** below the limit, it will exceed the limit rather than generate
** an [SQLITE_NOMEM] error. In other words, the soft heap limit 
** is advisory only.
**
** ^The return value from sqlite3_soft_heap_limit64() is the size of
** the soft heap limit prior to the call, or negative in the case of an
** error. ^If the argument N is negative
** then no change is made to the soft heap limit. Hence, the current
** size of the soft heap limit can be determined by invoking
** sqlite3_soft_heap_limit64() with a negative argument.
**
** ^If the argument N is zero then the soft heap limit is disabled.
**
** ^(The soft heap limit is not enforced in the current implementation
** if one or more of following conditions are true:
**
** <ul>
** <li> The soft heap limit is set to zero.
** <li> Memory accounting is disabled using a combination of the
** [sqlite3_config]([SQLITE_CONFIG_MEMSTATUS],...) start-time option and
** the [SQLITE_DEFAULT_MEMSTATUS] compile-time option.
** <li> An alternative page cache implementation is specified using
** [sqlite3_config]([SQLITE_CONFIG_PCACHE2],...).
** <li> The page cache allocates from its own memory pool supplied
** by [sqlite3_config]([SQLITE_CONFIG_PAGECACHE],...) rather than
** from the heap.
** </ul>)^
**
** Beginning with SQLite version 3.7.3, the soft heap limit is enforced
** regardless of whether or not the [SQLITE_ENABLE_MEMORY_MANAGEMENT]
** compile-time option is invoked. With [SQLITE_ENABLE_MEMORY_MANAGEMENT],
** the soft heap limit is enforced on every memory allocation. Without
** [SQLITE_ENABLE_MEMORY_MANAGEMENT], the soft heap limit is only enforced
** when memory is allocated by the page cache. Testing suggests that because
** the page cache is the predominate memory user in SQLite, most
** applications will achieve adequate soft heap limit enforcement without
** the use of [SQLITE_ENABLE_MEMORY_MANAGEMENT].
**
** The circumstances under which SQLite will enforce the soft heap limit may
** changes in future releases of SQLite.
*/
SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_soft_heap_limit64(sqlite3_int64 N);

/*
** CAPI3REF: Deprecated Soft Heap Limit Interface
** DEPRECATED
**
** This is a deprecated version of the [sqlite3_soft_heap_limit64()]
** interface.  This routine is provided for historical compatibility
** only.  All new applications should use the
** [sqlite3_soft_heap_limit64()] interface rather than this one.
*/
SQLITE_API SQLITE_DEPRECATED void SQLITE_STDCALL sqlite3_soft_heap_limit(int N);

/*
** CAPI3REF: Extract Metadata About A Column Of A Table
** METHOD: sqlite3
**
** ^(The sqlite3_table_column_metadata(X,D,T,C,....) routine returns
** information about column C of table T in database D
** on [database connection] X.)^ ^The sqlite3_table_column_metadata()
** interface returns SQLITE_OK and fills in the non-NULL pointers in
** the final five arguments with appropriate values if the specified
** column exists. ^The sqlite3_table_column_metadata() interface returns
** SQLITE_ERROR and if the specified column does not exist.
** ^If the column-name parameter to sqlite3_table_column_metadata() is a
** NULL pointer, then this routine simply checks for the existance of the
** table and returns SQLITE_OK if the table exists and SQLITE_ERROR if it
** does not.
**
** ^The column is identified by the second, third and fourth parameters to
** this function. ^(The second parameter is either the name of the database
** (i.e. "main", "temp", or an attached database) containing the specified
** table or NULL.)^ ^If it is NULL, then all attached databases are searched
** for the table using the same algorithm used by the database engine to
** resolve unqualified table references.
**
** ^The third and fourth parameters to this function are the table and column
** name of the desired column, respectively.
**
** ^Metadata is returned by writing to the memory locations passed as the 5th
** and subsequent parameters to this function. ^Any of these arguments may be
** NULL, in which case the corresponding element of metadata is omitted.
**
** ^(<blockquote>
** <table border="1">
** <tr><th> Parameter <th> Output Type <th> Description
**
** <tr><td> 5th <td> const char* <td> Data type
** <tr><td> 6th <td> const char* <td> Name of default collation sequence
** <tr><td> 7th <td> int <td> True if column has a NOT NULL constraint
** <tr><td> 8th <td> int <td> True if column is part of the PRIMARY KEY
** <tr><td> 9th <td> int <td> True if column is [AUTOINCREMENT]
** </table>
** </blockquote>)^
**
** ^The memory pointed to by the character pointers returned for the
** declaration type and collation sequence is valid until the next
** call to any SQLite API function.
**
** ^If the specified table is actually a view, an [error code] is returned.
**
** ^If the specified column is "rowid", "oid" or "_rowid_" and the table 
** is not a [WITHOUT ROWID] table and an
** [INTEGER PRIMARY KEY] column has been explicitly declared, then the output
** parameters are set for the explicitly declared column. ^(If there is no
** [INTEGER PRIMARY KEY] column, then the outputs
** for the [rowid] are set as follows:
**
** <pre>
** data type: "INTEGER"
** collation sequence: "BINARY"
** not null: 0
** primary key: 1
** auto increment: 0
** </pre>)^
**
** ^This function causes all database schemas to be read from disk and
** parsed, if that has not already been done, and returns an error if
** any errors are encountered while loading the schema.
*/
SQLITE_API int SQLITE_STDCALL sqlite3_table_column_metadata(
 sqlite3 *db, /* Connection handle */
 const char *zDbName, /* Database name or NULL */
 const char *zTableName, /* Table name */
 const char *zColumnName, /* Column name */
 char const **pzDataType, /* OUTPUT: Declared data type */
 char const **pzCollSeq, /* OUTPUT: Collation sequence name */
 int *pNotNull, /* OUTPUT: True if NOT NULL constraint exists */
 int *pPrimaryKey, /* OUTPUT: True if column part of PK */
 int *pAutoinc /* OUTPUT: True if column is auto-increment */
);

/*
** CAPI3REF: Load An Extension
** METHOD: sqlite3
**
** ^This interface loads an SQLite extension library from the named file.
**
** ^The sqlite3_load_extension() interface attempts to load an
** [SQLite extension] library contained in the file zFile.  If
** the file cannot be loaded directly, attempts are made to load
** with various operating-system specific extensions added.
** So for example, if "samplelib" cannot be loaded, then names like
** "samplelib.so" or "samplelib.dylib" or "samplelib.dll" might
** be tried also.
**
** ^The entry point is zProc.
** ^(zProc may be 0, in which case SQLite will try to come up with an
** entry point name on its own.  It first tries "sqlite3_extension_init".
** If that does not work, it constructs a name "sqlite3_X_init" where the
** X is consists of the lower-case equivalent of all ASCII alphabetic
** characters in the filename from the last "/" to the first following
** "." and omitting any initial "lib".)^
** ^The sqlite3_load_extension() interface returns
** [SQLITE_OK] on success and [SQLITE_ERROR] if something goes wrong.
** ^If an error occurs and pzErrMsg is not 0, then the
** [sqlite3_load_extension()] interface shall attempt to
** fill *pzErrMsg with error message text stored in memory
** obtained from [sqlite3_malloc()]. The calling function
** should free this memory by calling [sqlite3_free()].
**
** ^Extension loading must be enabled using
** [sqlite3_enable_load_extension()] prior to calling this API,
** otherwise an error will be returned.
**
** See also the [load_extension() SQL function].
*/
SQLITE_API int SQLITE_STDCALL sqlite3_load_extension(
  sqlite3 *db,          /* Load the extension into this database connection */
  const char *zFile,    /* Name of the shared library containing extension */
  const char *zProc,    /* Entry point.  Derived from zFile if 0 */
  char **pzErrMsg       /* Put error message here if not 0 */
);

/*
** CAPI3REF: Enable Or Disable Extension Loading
** METHOD: sqlite3
**
** ^So as not to open security holes in older applications that are
** unprepared to deal with [extension loading], and as a means of disabling
** [extension loading] while evaluating user-entered SQL, the following API
** is provided to turn the [sqlite3_load_extension()] mechanism on and off.
**
** ^Extension loading is off by default.
** ^Call the sqlite3_enable_load_extension() routine with onoff==1
** to turn extension loading on and call it with onoff==0 to turn
** it back off again.
*/
SQLITE_API int SQLITE_STDCALL sqlite3_enable_load_extension(sqlite3 *db, int onoff);

/*
** CAPI3REF: Automatically Load Statically Linked Extensions
**
** ^This interface causes the xEntryPoint() function to be invoked for
** each new [database connection] that is created. The idea here is that
** xEntryPoint() is the entry point for a statically linked [SQLite extension]
** that is to be automatically loaded into all new database connections.
**
** ^(Even though the function prototype shows that xEntryPoint() takes
** no arguments and returns void, SQLite invokes xEntryPoint() with three
** arguments and expects and integer result as if the signature of the
** entry point where as follows:
**
** <blockquote><pre>
** &nbsp; int xEntryPoint(
** &nbsp; sqlite3 *db,
** &nbsp; const char **pzErrMsg,
** &nbsp; const struct sqlite3_api_routines *pThunk
** &nbsp; );
** </pre></blockquote>)^
**
** If the xEntryPoint routine encounters an error, it should make *pzErrMsg
** point to an appropriate error message (obtained from [sqlite3_mprintf()])
** and return an appropriate [error code]. ^SQLite ensures that *pzErrMsg
** is NULL before calling the xEntryPoint(). ^SQLite will invoke
** [sqlite3_free()] on *pzErrMsg after xEntryPoint() returns. ^If any
** xEntryPoint() returns an error, the [sqlite3_open()], [sqlite3_open16()],
** or [sqlite3_open_v2()] call that provoked the xEntryPoint() will fail.
**
** ^Calling sqlite3_auto_extension(X) with an entry point X that is already
** on the list of automatic extensions is a harmless no-op. ^No entry point
** will be called more than once for each database connection that is opened.
**
** See also: [sqlite3_reset_auto_extension()]
** and [sqlite3_cancel_auto_extension()]
*/
SQLITE_API int SQLITE_STDCALL sqlite3_auto_extension(void (*xEntryPoint)(void));

/*
** CAPI3REF: Cancel Automatic Extension Loading
**
** ^The [sqlite3_cancel_auto_extension(X)] interface unregisters the
** initialization routine X that was registered using a prior call to
** [sqlite3_auto_extension(X)].  ^The [sqlite3_cancel_auto_extension(X)]
** routine returns 1 if initialization routine X was successfully 
** unregistered and it returns 0 if X was not on the list of initialization
** routines.
*/
SQLITE_API int SQLITE_STDCALL sqlite3_cancel_auto_extension(void (*xEntryPoint)(void));

/*
** CAPI3REF: Reset Automatic Extension Loading
**
** ^This interface disables all automatic extensions previously
** registered using [sqlite3_auto_extension()].
*/
SQLITE_API void SQLITE_STDCALL sqlite3_reset_auto_extension(void);

/*
** The interface to the virtual-table mechanism is currently considered
** to be experimental.  The interface might change in incompatible ways.
** If this is a problem for you, do not use the interface at this time.
**
** When the virtual-table mechanism stabilizes, we will declare the
** interface fixed, support it indefinitely, and remove this comment.
*/

/*
** Structures used by the virtual table interface
*/
typedef struct sqlite3_vtab sqlite3_vtab;
typedef struct sqlite3_index_info sqlite3_index_info;
typedef struct sqlite3_vtab_cursor sqlite3_vtab_cursor;
typedef struct sqlite3_module sqlite3_module;

/*
** CAPI3REF: Virtual Table Object
** KEYWORDS: sqlite3_module {virtual table module}
**
** This structure, sometimes called a "virtual table module", 
** defines the implementation of a [virtual tables].  
** This structure consists mostly of methods for the module.
**
** ^A virtual table module is created by filling in a persistent
** instance of this structure and passing a pointer to that instance
** to [sqlite3_create_module()] or [sqlite3_create_module_v2()].
** ^The registration remains valid until it is replaced by a different
** module or until the [database connection] closes.  The content
** of this structure must not change while it is registered with
** any database connection.
*/
struct sqlite3_module {
  int iVersion;
  int (*xCreate)(sqlite3*, void *pAux,
               int argc, const char *const*argv,
               sqlite3_vtab **ppVTab, char**);
  int (*xConnect)(sqlite3*, void *pAux,
               int argc, const char *const*argv,
               sqlite3_vtab **ppVTab, char**);
  int (*xBestIndex)(sqlite3_vtab *pVTab, sqlite3_index_info*);
  int (*xDisconnect)(sqlite3_vtab *pVTab);
  int (*xDestroy)(sqlite3_vtab *pVTab);
  int (*xOpen)(sqlite3_vtab *pVTab, sqlite3_vtab_cursor **ppCursor);
  int (*xClose)(sqlite3_vtab_cursor*);
  int (*xFilter)(sqlite3_vtab_cursor*, int idxNum, const char *idxStr,
                int argc, sqlite3_value **argv);
  int (*xNext)(sqlite3_vtab_cursor*);
  int (*xEof)(sqlite3_vtab_cursor*);
  int (*xColumn)(sqlite3_vtab_cursor*, sqlite3_context*, int);
  int (*xRowid)(sqlite3_vtab_cursor*, sqlite3_int64 *pRowid);
  int (*xUpdate)(sqlite3_vtab *, int, sqlite3_value **, sqlite3_int64 *);
  int (*xBegin)(sqlite3_vtab *pVTab);
  int (*xSync)(sqlite3_vtab *pVTab);
  int (*xCommit)(sqlite3_vtab *pVTab);
  int (*xRollback)(sqlite3_vtab *pVTab);
  int (*xFindFunction)(sqlite3_vtab *pVtab, int nArg, const char *zName,
                       void (**pxFunc)(sqlite3_context*,int,sqlite3_value**),
                       void **ppArg);
  int (*xRename)(sqlite3_vtab *pVtab, const char *zNew);
  /* The methods above are in version 1 of the sqlite_module object. Those 
  ** below are for version 2 and greater. */
  int (*xSavepoint)(sqlite3_vtab *pVTab, int);
  int (*xRelease)(sqlite3_vtab *pVTab, int);
  int (*xRollbackTo)(sqlite3_vtab *pVTab, int);
};

/*
** CAPI3REF: Virtual Table Indexing Information
** KEYWORDS: sqlite3_index_info
**
** The sqlite3_index_info structure and its substructures is used as part
** of the [virtual table] interface to
** pass information into and receive the reply from the [xBestIndex]
** method of a [virtual table module]. The fields under **Inputs** are the
** inputs to xBestIndex and are read-only. xBestIndex inserts its
** results into the **Outputs** fields.
**
** ^(The aConstraint[] array records WHERE clause constraints of the form:
**
** <blockquote>column OP expr</blockquote>
**
** where OP is =, &lt;, &lt;=, &gt;, or &gt;=.)^ ^(The particular operator is
** stored in aConstraint[].op using one of the
** [SQLITE_INDEX_CONSTRAINT_EQ | SQLITE_INDEX_CONSTRAINT_ values].)^
** ^(The index of the column is stored in
** aConstraint[].iColumn.)^ ^(aConstraint[].usable is TRUE if the
** expr on the right-hand side can be evaluated (and thus the constraint
** is usable) and false if it cannot.)^
**
** ^The optimizer automatically inverts terms of the form "expr OP column"
** and makes other simplifications to the WHERE clause in an attempt to
** get as many WHERE clause terms into the form shown above as possible.
** ^The aConstraint[] array only reports WHERE clause terms that are
** relevant to the particular virtual table being queried.
**
** ^Information about the ORDER BY clause is stored in aOrderBy[].
** ^Each term of aOrderBy records a column of the ORDER BY clause.
**
** The [xBestIndex] method must fill aConstraintUsage[] with information
** about what parameters to pass to xFilter. ^If argvIndex>0 then
** the right-hand side of the corresponding aConstraint[] is evaluated
** and becomes the argvIndex-th entry in argv. ^(If aConstraintUsage[].omit
** is true, then the constraint is assumed to be fully handled by the
** virtual table and is not checked again by SQLite.)^
**
** ^The idxNum and idxPtr values are recorded and passed into the
** [xFilter] method.
** ^[sqlite3_free()] is used to free idxPtr if and only if
** needToFreeIdxPtr is true.
**
** ^The orderByConsumed means that output from [xFilter]/[xNext] will occur in
** the correct order to satisfy the ORDER BY clause so that no separate
** sorting step is required.
**
** ^The estimatedCost value is an estimate of the cost of a particular
** strategy. A cost of N indicates that the cost of the strategy is similar
** to a linear scan of an SQLite table with N rows. A cost of log(N) 
** indicates that the expense of the operation is similar to that of a
** binary search on a unique indexed field of an SQLite table with N rows.
**
** ^The estimatedRows value is an estimate of the number of rows that
** will be returned by the strategy.
**
** IMPORTANT: The estimatedRows field was added to the sqlite3_index_info
** structure for SQLite version 3.8.2. If a virtual table extension is
** used with an SQLite version earlier than 3.8.2, the results of attempting 
** to read or write the estimatedRows field are undefined (but are likely 
** to included crashing the application). The estimatedRows field should
** therefore only be used if [sqlite3_libversion_number()] returns a
** value greater than or equal to 3008002.
*/
struct sqlite3_index_info {
 /* Inputs */
 int nConstraint; /* Number of entries in aConstraint */
 struct sqlite3_index_constraint {
 int iColumn; /* Column on left-hand side of constraint */
 unsigned char op; /* Constraint operator */
 unsigned char usable; /* True if this constraint is usable */
 int iTermOffset; /* Used internally - xBestIndex should ignore */
 } *aConstraint; /* Table of WHERE clause constraints */
 int nOrderBy; /* Number of terms in the ORDER BY clause */
 struct sqlite3_index_orderby {
 int iColumn; /* Column number */
 unsigned char desc; /* True for DESC. False for ASC. */
 } *aOrderBy; /* The ORDER BY clause */
 /* Outputs */
 struct sqlite3_index_constraint_usage {
 int argvIndex; /* if >0, constraint is part of argv to xFilter */
 unsigned char omit; /* Do not code a test for this constraint */
 } *aConstraintUsage;
 int idxNum; /* Number used to identify the index */
 char *idxStr; /* String, possibly obtained from sqlite3_malloc */
 int needToFreeIdxStr; /* Free idxStr using sqlite3_free() if true */
 int orderByConsumed; /* True if output is already ordered */
 double estimatedCost; /* Estimated cost of using this index */
 /* Fields below are only available in SQLite 3.8.2 and later */
 sqlite3_int64 estimatedRows; /* Estimated number of rows returned */
};

/*
** CAPI3REF: Virtual Table Constraint Operator Codes
**
** These macros defined the allowed values for the
** [sqlite3_index_info].aConstraint[].op field.  Each value represents
** an operator that is part of a constraint term in the wHERE clause of
** a query that uses a [virtual table].
*/
#define SQLITE_INDEX_CONSTRAINT_EQ    2
#define SQLITE_INDEX_CONSTRAINT_GT    4
#define SQLITE_INDEX_CONSTRAINT_LE    8
#define SQLITE_INDEX_CONSTRAINT_LT    16
#define SQLITE_INDEX_CONSTRAINT_GE    32
#define SQLITE_INDEX_CONSTRAINT_MATCH 64

/*
** CAPI3REF: Register A Virtual Table Implementation
** METHOD: sqlite3
**
** ^These routines are used to register a new [virtual table module] name.
** ^Module names must be registered before
** creating a new [virtual table] using the module and before using a
** preexisting [virtual table] for the module.
**
** ^The module name is registered on the [database connection] specified
** by the first parameter.  ^The name of the module is given by the 
** second parameter.  ^The third parameter is a pointer to
** the implementation of the [virtual table module].   ^The fourth
** parameter is an arbitrary client data pointer that is passed through
** into the [xCreate] and [xConnect] methods of the virtual table module
** when a new virtual table is be being created or reinitialized.
**
** ^The sqlite3_create_module_v2() interface has a fifth parameter which
** is a pointer to a destructor for the pClientData.  ^SQLite will
** invoke the destructor function (if it is not NULL) when SQLite
** no longer needs the pClientData pointer.  ^The destructor will also
** be invoked if the call to sqlite3_create_module_v2() fails.
** ^The sqlite3_create_module()
** interface is equivalent to sqlite3_create_module_v2() with a NULL
** destructor.
*/
SQLITE_API int SQLITE_STDCALL sqlite3_create_module(
  sqlite3 *db,               /* SQLite connection to register module with */
  const char *zName,         /* Name of the module */
  const sqlite3_module *p,   /* Methods for the module */
  void *pClientData          /* Client data for xCreate/xConnect */
);
SQLITE_API int SQLITE_STDCALL sqlite3_create_module_v2(
  sqlite3 *db,               /* SQLite connection to register module with */
  const char *zName,         /* Name of the module */
  const sqlite3_module *p,   /* Methods for the module */
  void *pClientData,         /* Client data for xCreate/xConnect */
  void(*xDestroy)(void*)     /* Module destructor function */
);

/*
** CAPI3REF: Virtual Table Instance Object
** KEYWORDS: sqlite3_vtab
**
** Every [virtual table module] implementation uses a subclass
** of this object to describe a particular instance
** of the [virtual table].  Each subclass will
** be tailored to the specific needs of the module implementation.
** The purpose of this superclass is to define certain fields that are
** common to all module implementations.
**
** ^Virtual tables methods can set an error message by assigning a
** string obtained from [sqlite3_mprintf()] to zErrMsg.  The method should
** take care that any prior string is freed by a call to [sqlite3_free()]
** prior to assigning a new string to zErrMsg.  ^After the error message
** is delivered up to the client application, the string will be automatically
** freed by sqlite3_free() and the zErrMsg field will be zeroed.
*/
struct sqlite3_vtab {
  const sqlite3_module *pModule;  /* The module for this virtual table */
  int nRef;                       /* Number of open cursors */
  char *zErrMsg;                  /* Error message from sqlite3_mprintf() */
  /* Virtual table implementations will typically add additional fields */
};

/*
** CAPI3REF: Virtual Table Cursor Object
** KEYWORDS: sqlite3_vtab_cursor {virtual table cursor}
**
** Every [virtual table module] implementation uses a subclass of the
** following structure to describe cursors that point into the
** [virtual table] and are used
** to loop through the virtual table.  Cursors are created using the
** [sqlite3_module.xOpen | xOpen] method of the module and are destroyed
** by the [sqlite3_module.xClose | xClose] method.  Cursors are used
** by the [xFilter], [xNext], [xEof], [xColumn], and [xRowid] methods
** of the module.  Each module implementation will define
** the content of a cursor structure to suit its own needs.
**
** This superclass exists in order to define fields of the cursor that
** are common to all implementations.
*/
struct sqlite3_vtab_cursor {
  sqlite3_vtab *pVtab;      /* Virtual table of this cursor */
  /* Virtual table implementations will typically add additional fields */
};

/*
** CAPI3REF: Declare The Schema Of A Virtual Table
**
** ^The [xCreate] and [xConnect] methods of a
** [virtual table module] call this interface
** to declare the format (the names and datatypes of the columns) of
** the virtual tables they implement.
*/
SQLITE_API int SQLITE_STDCALL sqlite3_declare_vtab(sqlite3*, const char *zSQL);

/*
** CAPI3REF: Overload A Function For A Virtual Table
** METHOD: sqlite3
**
** ^(Virtual tables can provide alternative implementations of functions
** using the [xFindFunction] method of the [virtual table module].  
** But global versions of those functions
** must exist in order to be overloaded.)^
**
** ^(This API makes sure a global version of a function with a particular
** name and number of parameters exists.  If no such function exists
** before this API is called, a new function is created.)^  ^The implementation
** of the new function always causes an exception to be thrown.  So
** the new function is not good for anything by itself.  Its only
** purpose is to be a placeholder function that can be overloaded
** by a [virtual table].
*/
SQLITE_API int SQLITE_STDCALL sqlite3_overload_function(sqlite3*, const char *zFuncName, int nArg);

/*
** The interface to the virtual-table mechanism defined above (back up
** to a comment remarkably similar to this one) is currently considered
** to be experimental.  The interface might change in incompatible ways.
** If this is a problem for you, do not use the interface at this time.
**
** When the virtual-table mechanism stabilizes, we will declare the
** interface fixed, support it indefinitely, and remove this comment.
*/

/*
** CAPI3REF: A Handle To An Open BLOB
** KEYWORDS: {BLOB handle} {BLOB handles}
**
** An instance of this object represents an open BLOB on which
** [sqlite3_blob_open | incremental BLOB I/O] can be performed.
** ^Objects of this type are created by [sqlite3_blob_open()]
** and destroyed by [sqlite3_blob_close()].
** ^The [sqlite3_blob_read()] and [sqlite3_blob_write()] interfaces
** can be used to read or write small subsections of the BLOB.
** ^The [sqlite3_blob_bytes()] interface returns the size of the BLOB in bytes.
*/
typedef struct sqlite3_blob sqlite3_blob;

/*
** CAPI3REF: Open A BLOB For Incremental I/O
** METHOD: sqlite3
** CONSTRUCTOR: sqlite3_blob
**
** ^(This interfaces opens a [BLOB handle | handle] to the BLOB located
** in row iRow, column zColumn, table zTable in database zDb;
** in other words, the same BLOB that would be selected by:
**
** <pre>
** SELECT zColumn FROM zDb.zTable WHERE [rowid] = iRow;
** </pre>)^
**
** ^(Parameter zDb is not the filename that contains the database, but 
** rather the symbolic name of the database. For attached databases, this is
** the name that appears after the AS keyword in the [ATTACH] statement.
** For the main database file, the database name is "main". For TEMP
** tables, the database name is "temp".)^
**
** ^If the flags parameter is non-zero, then the BLOB is opened for read
** and write access. ^If the flags parameter is zero, the BLOB is opened for
** read-only access.
**
** ^(On success, [SQLITE_OK] is returned and the new [BLOB handle] is stored
** in *ppBlob. Otherwise an [error code] is returned and, unless the error
** code is SQLITE_MISUSE, *ppBlob is set to NULL.)^ ^This means that, provided
** the API is not misused, it is always safe to call [sqlite3_blob_close()] 
** on *ppBlob after this function it returns.
**
** This function fails with SQLITE_ERROR if any of the following are true:
** <ul>
** <li> ^(Database zDb does not exist)^, 
** <li> ^(Table zTable does not exist within database zDb)^, 
** <li> ^(Table zTable is a WITHOUT ROWID table)^, 
** <li> ^(Column zColumn does not exist)^,
** <li> ^(Row iRow is not present in the table)^,
** <li> ^(The specified column of row iRow contains a value that is not
** a TEXT or BLOB value)^,
** <li> ^(Column zColumn is part of an index, PRIMARY KEY or UNIQUE 
** constraint and the blob is being opened for read/write access)^,
** <li> ^([foreign key constraints | Foreign key constraints] are enabled, 
** column zColumn is part of a [child key] definition and the blob is
** being opened for read/write access)^.
** </ul>
**
** ^Unless it returns SQLITE_MISUSE, this function sets the 
** [database connection] error code and message accessible via 
** [sqlite3_errcode()] and [sqlite3_errmsg()] and related functions. 
**
**
** ^(If the row that a BLOB handle points to is modified by an
** [UPDATE], [DELETE], or by [ON CONFLICT] side-effects
** then the BLOB handle is marked as "expired".
** This is true if any column of the row is changed, even a column
** other than the one the BLOB handle is open on.)^
** ^Calls to [sqlite3_blob_read()] and [sqlite3_blob_write()] for
** an expired BLOB handle fail with a return code of [SQLITE_ABORT].
** ^(Changes written into a BLOB prior to the BLOB expiring are not
** rolled back by the expiration of the BLOB. Such changes will eventually
** commit if the transaction continues to completion.)^
**
** ^Use the [sqlite3_blob_bytes()] interface to determine the size of
** the opened blob. ^The size of a blob may not be changed by this
** interface. Use the [UPDATE] SQL command to change the size of a
** blob.
**
** ^The [sqlite3_bind_zeroblob()] and [sqlite3_result_zeroblob()] interfaces
** and the built-in [zeroblob] SQL function may be used to create a 
** zero-filled blob to read or write using the incremental-blob interface.
**
** To avoid a resource leak, every open [BLOB handle] should eventually
** be released by a call to [sqlite3_blob_close()].
*/
SQLITE_API int SQLITE_STDCALL sqlite3_blob_open(
 sqlite3*,
 const char *zDb,
 const char *zTable,
 const char *zColumn,
 sqlite3_int64 iRow,
 int flags,
 sqlite3_blob **ppBlob
);

/*
** CAPI3REF: Move a BLOB Handle to a New Row
** METHOD: sqlite3_blob
**
** ^This function is used to move an existing blob handle so that it points
** to a different row of the same database table. ^The new row is identified
** by the rowid value passed as the second argument. Only the row can be
** changed. ^The database, table and column on which the blob handle is open
** remain the same. Moving an existing blob handle to a new row can be
** faster than closing the existing handle and opening a new one.
**
** ^(The new row must meet the same criteria as for [sqlite3_blob_open()] -
** it must exist and there must be either a blob or text value stored in
** the nominated column.)^ ^If the new row is not present in the table, or if
** it does not contain a blob or text value, or if another error occurs, an
** SQLite error code is returned and the blob handle is considered aborted.
** ^All subsequent calls to [sqlite3_blob_read()], [sqlite3_blob_write()] or
** [sqlite3_blob_reopen()] on an aborted blob handle immediately return
** SQLITE_ABORT. ^Calling [sqlite3_blob_bytes()] on an aborted blob handle
** always returns zero.
**
** ^This function sets the database handle error code and message.
*/
SQLITE_API SQLITE_EXPERIMENTAL int SQLITE_STDCALL sqlite3_blob_reopen(sqlite3_blob *, sqlite3_int64);

/*
** CAPI3REF: Close A BLOB Handle
** DESTRUCTOR: sqlite3_blob
**
** ^This function closes an open [BLOB handle]. ^(The BLOB handle is closed
** unconditionally.  Even if this routine returns an error code, the 
** handle is still closed.)^
**
** ^If the blob handle being closed was opened for read-write access, and if
** the database is in auto-commit mode and there are no other open read-write
** blob handles or active write statements, the current transaction is
** committed. ^If an error occurs while committing the transaction, an error
** code is returned and the transaction rolled back.
**
** Calling this function with an argument that is not a NULL pointer or an
** open blob handle results in undefined behaviour. ^Calling this routine 
** with a null pointer (such as would be returned by a failed call to 
** [sqlite3_blob_open()]) is a harmless no-op. ^Otherwise, if this function
** is passed a valid open blob handle, the values returned by the 
** sqlite3_errcode() and sqlite3_errmsg() functions are set before returning.
*/
SQLITE_API int SQLITE_STDCALL sqlite3_blob_close(sqlite3_blob *);

/*
** CAPI3REF: Return The Size Of An Open BLOB
** METHOD: sqlite3_blob
**
** ^Returns the size in bytes of the BLOB accessible via the 
** successfully opened [BLOB handle] in its only argument.  ^The
** incremental blob I/O routines can only read or overwriting existing
** blob content; they cannot change the size of a blob.
**
** This routine only works on a [BLOB handle] which has been created
** by a prior successful call to [sqlite3_blob_open()] and which has not
** been closed by [sqlite3_blob_close()].  Passing any other pointer in
** to this routine results in undefined and probably undesirable behavior.
*/
SQLITE_API int SQLITE_STDCALL sqlite3_blob_bytes(sqlite3_blob *);

/*
** CAPI3REF: Read Data From A BLOB Incrementally
** METHOD: sqlite3_blob
**
** ^(This function is used to read data from an open [BLOB handle] into a
** caller-supplied buffer. N bytes of data are copied into buffer Z
** from the open BLOB, starting at offset iOffset.)^
**
** ^If offset iOffset is less than N bytes from the end of the BLOB,
** [SQLITE_ERROR] is returned and no data is read.  ^If N or iOffset is
** less than zero, [SQLITE_ERROR] is returned and no data is read.
** ^The size of the blob (and hence the maximum value of N+iOffset)
** can be determined using the [sqlite3_blob_bytes()] interface.
**
** ^An attempt to read from an expired [BLOB handle] fails with an
** error code of [SQLITE_ABORT].
**
** ^(On success, sqlite3_blob_read() returns SQLITE_OK.
** Otherwise, an [error code] or an [extended error code] is returned.)^
**
** This routine only works on a [BLOB handle] which has been created
** by a prior successful call to [sqlite3_blob_open()] and which has not
** been closed by [sqlite3_blob_close()].  Passing any other pointer in
** to this routine results in undefined and probably undesirable behavior.
**
** See also: [sqlite3_blob_write()].
*/
SQLITE_API int SQLITE_STDCALL sqlite3_blob_read(sqlite3_blob *, void *Z, int N, int iOffset);

/*
** CAPI3REF: Write Data Into A BLOB Incrementally
** METHOD: sqlite3_blob
**
** ^(This function is used to write data into an open [BLOB handle] from a
** caller-supplied buffer. N bytes of data are copied from the buffer Z
** into the open BLOB, starting at offset iOffset.)^
**
** ^(On success, sqlite3_blob_write() returns SQLITE_OK.
** Otherwise, an  [error code] or an [extended error code] is returned.)^
** ^Unless SQLITE_MISUSE is returned, this function sets the 
** [database connection] error code and message accessible via 
** [sqlite3_errcode()] and [sqlite3_errmsg()] and related functions. 
**
** ^If the [BLOB handle] passed as the first argument was not opened for
** writing (the flags parameter to [sqlite3_blob_open()] was zero),
** this function returns [SQLITE_READONLY].
**
** This function may only modify the contents of the BLOB; it is
** not possible to increase the size of a BLOB using this API.
** ^If offset iOffset is less than N bytes from the end of the BLOB,
** [SQLITE_ERROR] is returned and no data is written. The size of the 
** BLOB (and hence the maximum value of N+iOffset) can be determined 
** using the [sqlite3_blob_bytes()] interface. ^If N or iOffset are less 
** than zero [SQLITE_ERROR] is returned and no data is written.
**
** ^An attempt to write to an expired [BLOB handle] fails with an
** error code of [SQLITE_ABORT].  ^Writes to the BLOB that occurred
** before the [BLOB handle] expired are not rolled back by the
** expiration of the handle, though of course those changes might
** have been overwritten by the statement that expired the BLOB handle
** or by other independent statements.
**
** This routine only works on a [BLOB handle] which has been created
** by a prior successful call to [sqlite3_blob_open()] and which has not
** been closed by [sqlite3_blob_close()].  Passing any other pointer in
** to this routine results in undefined and probably undesirable behavior.
**
** See also: [sqlite3_blob_read()].
*/
SQLITE_API int SQLITE_STDCALL sqlite3_blob_write(sqlite3_blob *, const void *z, int n, int iOffset);

/*
** CAPI3REF: Virtual File System Objects
**
** A virtual filesystem (VFS) is an [sqlite3_vfs] object
** that SQLite uses to interact
** with the underlying operating system.  Most SQLite builds come with a
** single default VFS that is appropriate for the host computer.
** New VFSes can be registered and existing VFSes can be unregistered.
** The following interfaces are provided.
**
** ^The sqlite3_vfs_find() interface returns a pointer to a VFS given its name.
** ^Names are case sensitive.
** ^Names are zero-terminated UTF-8 strings.
** ^If there is no match, a NULL pointer is returned.
** ^If zVfsName is NULL then the default VFS is returned.
**
** ^New VFSes are registered with sqlite3_vfs_register().
** ^Each new VFS becomes the default VFS if the makeDflt flag is set.
** ^The same VFS can be registered multiple times without injury.
** ^To make an existing VFS into the default VFS, register it again
** with the makeDflt flag set.  If two different VFSes with the
** same name are registered, the behavior is undefined.  If a
** VFS is registered with a name that is NULL or an empty string,
** then the behavior is undefined.
**
** ^Unregister a VFS with the sqlite3_vfs_unregister() interface.
** ^(If the default VFS is unregistered, another VFS is chosen as
** the default.  The choice for the new VFS is arbitrary.)^
*/
SQLITE_API sqlite3_vfs *SQLITE_STDCALL sqlite3_vfs_find(const char *zVfsName);
SQLITE_API int SQLITE_STDCALL sqlite3_vfs_register(sqlite3_vfs*, int makeDflt);
SQLITE_API int SQLITE_STDCALL sqlite3_vfs_unregister(sqlite3_vfs*);

/*
** CAPI3REF: Mutexes
**
** The SQLite core uses these routines for thread
** synchronization. Though they are intended for internal
** use by SQLite, code that links against SQLite is
** permitted to use any of these routines.
**
** The SQLite source code contains multiple implementations
** of these mutex routines. An appropriate implementation
** is selected automatically at compile-time. The following
** implementations are available in the SQLite core:
**
** <ul>
** <li> SQLITE_MUTEX_PTHREADS
** <li> SQLITE_MUTEX_W32
** <li> SQLITE_MUTEX_NOOP
** </ul>
**
** The SQLITE_MUTEX_NOOP implementation is a set of routines
** that does no real locking and is appropriate for use in
** a single-threaded application. The SQLITE_MUTEX_PTHREADS and
** SQLITE_MUTEX_W32 implementations are appropriate for use on Unix
** and Windows.
**
** If SQLite is compiled with the SQLITE_MUTEX_APPDEF preprocessor
** macro defined (with "-DSQLITE_MUTEX_APPDEF=1"), then no mutex
** implementation is included with the library. In this case the
** application must supply a custom mutex implementation using the
** [SQLITE_CONFIG_MUTEX] option of the sqlite3_config() function
** before calling sqlite3_initialize() or any other public sqlite3_
** function that calls sqlite3_initialize().
**
** ^The sqlite3_mutex_alloc() routine allocates a new
** mutex and returns a pointer to it. ^The sqlite3_mutex_alloc()
** routine returns NULL if it is unable to allocate the requested
** mutex. The argument to sqlite3_mutex_alloc() must one of these
** integer constants:
**
** <ul>
** <li> SQLITE_MUTEX_FAST
** <li> SQLITE_MUTEX_RECURSIVE
** <li> SQLITE_MUTEX_STATIC_MASTER
** <li> SQLITE_MUTEX_STATIC_MEM
** <li> SQLITE_MUTEX_STATIC_OPEN
** <li> SQLITE_MUTEX_STATIC_PRNG
** <li> SQLITE_MUTEX_STATIC_LRU
** <li> SQLITE_MUTEX_STATIC_PMEM
** <li> SQLITE_MUTEX_STATIC_APP1
** <li> SQLITE_MUTEX_STATIC_APP2
** <li> SQLITE_MUTEX_STATIC_APP3
** </ul>
**
** ^The first two constants (SQLITE_MUTEX_FAST and SQLITE_MUTEX_RECURSIVE)
** cause sqlite3_mutex_alloc() to create
** a new mutex. ^The new mutex is recursive when SQLITE_MUTEX_RECURSIVE
** is used but not necessarily so when SQLITE_MUTEX_FAST is used.
** The mutex implementation does not need to make a distinction
** between SQLITE_MUTEX_RECURSIVE and SQLITE_MUTEX_FAST if it does
** not want to. SQLite will only request a recursive mutex in
** cases where it really needs one. If a faster non-recursive mutex
** implementation is available on the host platform, the mutex subsystem
** might return such a mutex in response to SQLITE_MUTEX_FAST.
**
** ^The other allowed parameters to sqlite3_mutex_alloc() (anything other
** than SQLITE_MUTEX_FAST and SQLITE_MUTEX_RECURSIVE) each return
** a pointer to a static preexisting mutex. ^Nine static mutexes are
** used by the current version of SQLite. Future versions of SQLite
** may add additional static mutexes. Static mutexes are for internal
** use by SQLite only. Applications that use SQLite mutexes should
** use only the dynamic mutexes returned by SQLITE_MUTEX_FAST or
** SQLITE_MUTEX_RECURSIVE.
**
** ^Note that if one of the dynamic mutex parameters (SQLITE_MUTEX_FAST
** or SQLITE_MUTEX_RECURSIVE) is used then sqlite3_mutex_alloc()
** returns a different mutex on every call. ^For the static
** mutex types, the same mutex is returned on every call that has
** the same type number.
**
** ^The sqlite3_mutex_free() routine deallocates a previously
** allocated dynamic mutex. Attempting to deallocate a static
** mutex results in undefined behavior.
**
** ^The sqlite3_mutex_enter() and sqlite3_mutex_try() routines attempt
** to enter a mutex. ^If another thread is already within the mutex,
** sqlite3_mutex_enter() will block and sqlite3_mutex_try() will return
** SQLITE_BUSY. ^The sqlite3_mutex_try() interface returns [SQLITE_OK]
** upon successful entry. ^(Mutexes created using
** SQLITE_MUTEX_RECURSIVE can be entered multiple times by the same thread.
** In such cases, the
** mutex must be exited an equal number of times before another thread
** can enter.)^ If the same thread tries to enter any mutex other
** than an SQLITE_MUTEX_RECURSIVE more than once, the behavior is undefined.
**
** ^(Some systems (for example, Windows 95) do not support the operation
** implemented by sqlite3_mutex_try(). On those systems, sqlite3_mutex_try()
** will always return SQLITE_BUSY. The SQLite core only ever uses
** sqlite3_mutex_try() as an optimization so this is acceptable 
** behavior.)^
**
** ^The sqlite3_mutex_leave() routine exits a mutex that was
** previously entered by the same thread. The behavior
** is undefined if the mutex is not currently entered by the
** calling thread or is not currently allocated.
**
** ^If the argument to sqlite3_mutex_enter(), sqlite3_mutex_try(), or
** sqlite3_mutex_leave() is a NULL pointer, then all three routines
** behave as no-ops.
**
** See also: [sqlite3_mutex_held()] and [sqlite3_mutex_notheld()].
*/
SQLITE_API sqlite3_mutex *SQLITE_STDCALL sqlite3_mutex_alloc(int);
SQLITE_API void SQLITE_STDCALL sqlite3_mutex_free(sqlite3_mutex*);
SQLITE_API void SQLITE_STDCALL sqlite3_mutex_enter(sqlite3_mutex*);
SQLITE_API int SQLITE_STDCALL sqlite3_mutex_try(sqlite3_mutex*);
SQLITE_API void SQLITE_STDCALL sqlite3_mutex_leave(sqlite3_mutex*);

/*
** CAPI3REF: Mutex Methods Object
**
** An instance of this structure defines the low-level routines
** used to allocate and use mutexes.
**
** Usually, the default mutex implementations provided by SQLite are
** sufficient, however the application has the option of substituting a custom
** implementation for specialized deployments or systems for which SQLite
** does not provide a suitable implementation. In this case, the application
** creates and populates an instance of this structure to pass
** to sqlite3_config() along with the [SQLITE_CONFIG_MUTEX] option.
** Additionally, an instance of this structure can be used as an
** output variable when querying the system for the current mutex
** implementation, using the [SQLITE_CONFIG_GETMUTEX] option.
**
** ^The xMutexInit method defined by this structure is invoked as
** part of system initialization by the sqlite3_initialize() function.
** ^The xMutexInit routine is called by SQLite exactly once for each
** effective call to [sqlite3_initialize()].
**
** ^The xMutexEnd method defined by this structure is invoked as
** part of system shutdown by the sqlite3_shutdown() function. The
** implementation of this method is expected to release all outstanding
** resources obtained by the mutex methods implementation, especially
** those obtained by the xMutexInit method. ^The xMutexEnd()
** interface is invoked exactly once for each call to [sqlite3_shutdown()].
**
** ^(The remaining seven methods defined by this structure (xMutexAlloc,
** xMutexFree, xMutexEnter, xMutexTry, xMutexLeave, xMutexHeld and
** xMutexNotheld) implement the following interfaces (respectively):
**
** <ul>
** <li> [sqlite3_mutex_alloc()] </li>
** <li> [sqlite3_mutex_free()] </li>
** <li> [sqlite3_mutex_enter()] </li>
** <li> [sqlite3_mutex_try()] </li>
** <li> [sqlite3_mutex_leave()] </li>
** <li> [sqlite3_mutex_held()] </li>
** <li> [sqlite3_mutex_notheld()] </li>
** </ul>)^
**
** The only difference is that the public sqlite3_XXX functions enumerated
** above silently ignore any invocations that pass a NULL pointer instead
** of a valid mutex handle. The implementations of the methods defined
** by this structure are not required to handle this case, the results
** of passing a NULL pointer instead of a valid mutex handle are undefined
** (i.e. it is acceptable to provide an implementation that segfaults if
** it is passed a NULL pointer).
**
** The xMutexInit() method must be threadsafe. It must be harmless to
** invoke xMutexInit() multiple times within the same process and without
** intervening calls to xMutexEnd(). Second and subsequent calls to
** xMutexInit() must be no-ops.
**
** xMutexInit() must not use SQLite memory allocation ([sqlite3_malloc()]
** and its associates). Similarly, xMutexAlloc() must not use SQLite memory
** allocation for a static mutex. ^However xMutexAlloc() may use SQLite
** memory allocation for a fast or recursive mutex.
**
** ^SQLite will invoke the xMutexEnd() method when [sqlite3_shutdown()] is
** called, but only if the prior call to xMutexInit returned SQLITE_OK.
** If xMutexInit fails in any way, it is expected to clean up after itself
** prior to returning.
*/
typedef struct sqlite3_mutex_methods sqlite3_mutex_methods;
struct sqlite3_mutex_methods {
 int (*xMutexInit)(void);
 int (*xMutexEnd)(void);
 sqlite3_mutex *(*xMutexAlloc)(int);
 void (*xMutexFree)(sqlite3_mutex *);
 void (*xMutexEnter)(sqlite3_mutex *);
 int (*xMutexTry)(sqlite3_mutex *);
 void (*xMutexLeave)(sqlite3_mutex *);
 int (*xMutexHeld)(sqlite3_mutex *);
 int (*xMutexNotheld)(sqlite3_mutex *);
};

/*
** CAPI3REF: Mutex Verification Routines
**
** The sqlite3_mutex_held() and sqlite3_mutex_notheld() routines
** are intended for use inside assert() statements.  The SQLite core
** never uses these routines except inside an assert() and applications
** are advised to follow the lead of the core.  The SQLite core only
** provides implementations for these routines when it is compiled
** with the SQLITE_DEBUG flag.  External mutex implementations
** are only required to provide these routines if SQLITE_DEBUG is
** defined and if NDEBUG is not defined.
**
** These routines should return true if the mutex in their argument
** is held or not held, respectively, by the calling thread.
**
** The implementation is not required to provide versions of these
** routines that actually work. If the implementation does not provide working
** versions of these routines, it should at least provide stubs that always
** return true so that one does not get spurious assertion failures.
**
** If the argument to sqlite3_mutex_held() is a NULL pointer then
** the routine should return 1.   This seems counter-intuitive since
** clearly the mutex cannot be held if it does not exist.  But
** the reason the mutex does not exist is because the build is not
** using mutexes.  And we do not want the assert() containing the
** call to sqlite3_mutex_held() to fail, so a non-zero return is
** the appropriate thing to do.  The sqlite3_mutex_notheld()
** interface should also return 1 when given a NULL pointer.
*/
#ifndef NDEBUG
SQLITE_API int SQLITE_STDCALL sqlite3_mutex_held(sqlite3_mutex*);
SQLITE_API int SQLITE_STDCALL sqlite3_mutex_notheld(sqlite3_mutex*);
#endif

/*
** CAPI3REF: Mutex Types
**
** The [sqlite3_mutex_alloc()] interface takes a single argument
** which is one of these integer constants.
**
** The set of static mutexes may change from one SQLite release to the
** next.  Applications that override the built-in mutex logic must be
** prepared to accommodate additional static mutexes.
*/
#define SQLITE_MUTEX_FAST             0
#define SQLITE_MUTEX_RECURSIVE        1
#define SQLITE_MUTEX_STATIC_MASTER    2
#define SQLITE_MUTEX_STATIC_MEM       3  /* sqlite3_malloc() */
#define SQLITE_MUTEX_STATIC_MEM2      4  /* NOT USED */
#define SQLITE_MUTEX_STATIC_OPEN      4  /* sqlite3BtreeOpen() */
#define SQLITE_MUTEX_STATIC_PRNG      5  /* sqlite3_random() */
#define SQLITE_MUTEX_STATIC_LRU       6  /* lru page list */
#define SQLITE_MUTEX_STATIC_LRU2      7  /* NOT USED */
#define SQLITE_MUTEX_STATIC_PMEM      7  /* sqlite3PageMalloc() */
#define SQLITE_MUTEX_STATIC_APP1      8  /* For use by application */
#define SQLITE_MUTEX_STATIC_APP2      9  /* For use by application */
#define SQLITE_MUTEX_STATIC_APP3     10  /* For use by application */

/*
** CAPI3REF: Retrieve the mutex for a database connection
** METHOD: sqlite3
**
** ^This interface returns a pointer the [sqlite3_mutex] object that 
** serializes access to the [database connection] given in the argument
** when the [threading mode] is Serialized.
** ^If the [threading mode] is Single-thread or Multi-thread then this
** routine returns a NULL pointer.
*/
SQLITE_API sqlite3_mutex *SQLITE_STDCALL sqlite3_db_mutex(sqlite3*);

/*
** CAPI3REF: Low-Level Control Of Database Files
** METHOD: sqlite3
**
** ^The [sqlite3_file_control()] interface makes a direct call to the
** xFileControl method for the [sqlite3_io_methods] object associated
** with a particular database identified by the second argument. ^The
** name of the database is "main" for the main database or "temp" for the
** TEMP database, or the name that appears after the AS keyword for
** databases that are added using the [ATTACH] SQL command.
** ^A NULL pointer can be used in place of "main" to refer to the
** main database file.
** ^The third and fourth parameters to this routine
** are passed directly through to the second and third parameters of
** the xFileControl method.  ^The return value of the xFileControl
** method becomes the return value of this routine.
**
** ^The SQLITE_FCNTL_FILE_POINTER value for the op parameter causes
** a pointer to the underlying [sqlite3_file] object to be written into
** the space pointed to by the 4th parameter.  ^The SQLITE_FCNTL_FILE_POINTER
** case is a short-circuit path which does not actually invoke the
** underlying sqlite3_io_methods.xFileControl method.
**
** ^If the second parameter (zDbName) does not match the name of any
** open database file, then SQLITE_ERROR is returned.  ^This error
** code is not remembered and will not be recalled by [sqlite3_errcode()]
** or [sqlite3_errmsg()].  The underlying xFileControl method might
** also return SQLITE_ERROR.  There is no way to distinguish between
** an incorrect zDbName and an SQLITE_ERROR return from the underlying
** xFileControl method.
**
** See also: [SQLITE_FCNTL_LOCKSTATE]
*/
SQLITE_API int SQLITE_STDCALL sqlite3_file_control(sqlite3*, const char *zDbName, int op, void*);

/*
** CAPI3REF: Testing Interface
**
** ^The sqlite3_test_control() interface is used to read out internal
** state of SQLite and to inject faults into SQLite for testing
** purposes.  ^The first parameter is an operation code that determines
** the number, meaning, and operation of all subsequent parameters.
**
** This interface is not for use by applications.  It exists solely
** for verifying the correct operation of the SQLite library.  Depending
** on how the SQLite library is compiled, this interface might not exist.
**
** The details of the operation codes, their meanings, the parameters
** they take, and what they do are all subject to change without notice.
** Unlike most of the SQLite API, this function is not guaranteed to
** operate consistently from one release to the next.
*/
SQLITE_API int SQLITE_CDECL sqlite3_test_control(int op, ...);

/*
** CAPI3REF: Testing Interface Operation Codes
**
** These constants are the valid operation code parameters used
** as the first argument to [sqlite3_test_control()].
**
** These parameters and their meanings are subject to change
** without notice.  These values are for testing purposes only.
** Applications should not use any of these parameters or the
** [sqlite3_test_control()] interface.
*/
#define SQLITE_TESTCTRL_FIRST                    5
#define SQLITE_TESTCTRL_PRNG_SAVE                5
#define SQLITE_TESTCTRL_PRNG_RESTORE             6
#define SQLITE_TESTCTRL_PRNG_RESET               7
#define SQLITE_TESTCTRL_BITVEC_TEST              8
#define SQLITE_TESTCTRL_FAULT_INSTALL            9
#define SQLITE_TESTCTRL_BENIGN_MALLOC_HOOKS     10
#define SQLITE_TESTCTRL_PENDING_BYTE            11
#define SQLITE_TESTCTRL_ASSERT                  12
#define SQLITE_TESTCTRL_ALWAYS                  13
#define SQLITE_TESTCTRL_RESERVE                 14
#define SQLITE_TESTCTRL_OPTIMIZATIONS           15
#define SQLITE_TESTCTRL_ISKEYWORD               16
#define SQLITE_TESTCTRL_SCRATCHMALLOC           17
#define SQLITE_TESTCTRL_LOCALTIME_FAULT         18
#define SQLITE_TESTCTRL_EXPLAIN_STMT            19  /* NOT USED */
#define SQLITE_TESTCTRL_NEVER_CORRUPT           20
#define SQLITE_TESTCTRL_VDBE_COVERAGE           21
#define SQLITE_TESTCTRL_BYTEORDER               22
#define SQLITE_TESTCTRL_ISINIT                  23
#define SQLITE_TESTCTRL_SORTER_MMAP             24
#define SQLITE_TESTCTRL_IMPOSTER                25
#define SQLITE_TESTCTRL_LAST                    25

/*
** CAPI3REF: SQLite Runtime Status
**
** ^These interfaces are used to retrieve runtime status information
** about the performance of SQLite, and optionally to reset various
** highwater marks.  ^The first argument is an integer code for
** the specific parameter to measure.  ^(Recognized integer codes
** are of the form [status parameters | SQLITE_STATUS_...].)^
** ^The current value of the parameter is returned into *pCurrent.
** ^The highest recorded value is returned in *pHighwater.  ^If the
** resetFlag is true, then the highest record value is reset after
** *pHighwater is written.  ^(Some parameters do not record the highest
** value.  For those parameters
** nothing is written into *pHighwater and the resetFlag is ignored.)^
** ^(Other parameters record only the highwater mark and not the current
** value.  For these latter parameters nothing is written into *pCurrent.)^
**
** ^The sqlite3_status() and sqlite3_status64() routines return
** SQLITE_OK on success and a non-zero [error code] on failure.
**
** If either the current value or the highwater mark is too large to
** be represented by a 32-bit integer, then the values returned by
** sqlite3_status() are undefined.
**
** See also: [sqlite3_db_status()]
*/
SQLITE_API int SQLITE_STDCALL sqlite3_status(int op, int *pCurrent, int *pHighwater, int resetFlag);
SQLITE_API int SQLITE_STDCALL sqlite3_status64(
  int op,
  sqlite3_int64 *pCurrent,
  sqlite3_int64 *pHighwater,
  int resetFlag
);

/*
** CAPI3REF: Status Parameters
** KEYWORDS: {status parameters}
**
** These integer constants designate various run-time status parameters
** that can be returned by [sqlite3_status()].
**
** <dl>
** [[SQLITE_STATUS_MEMORY_USED]] ^(<dt>SQLITE_STATUS_MEMORY_USED</dt>
** <dd>This parameter is the current amount of memory checked out
** using [sqlite3_malloc()], either directly or indirectly. The
** figure includes calls made to [sqlite3_malloc()] by the application
** and internal memory usage by the SQLite library. Scratch memory
** controlled by [SQLITE_CONFIG_SCRATCH] and auxiliary page-cache
** memory controlled by [SQLITE_CONFIG_PAGECACHE] is not included in
** this parameter. The amount returned is the sum of the allocation
** sizes as reported by the xSize method in [sqlite3_mem_methods].</dd>)^
**
** [[SQLITE_STATUS_MALLOC_SIZE]] ^(<dt>SQLITE_STATUS_MALLOC_SIZE</dt>
** <dd>This parameter records the largest memory allocation request
** handed to [sqlite3_malloc()] or [sqlite3_realloc()] (or their
** internal equivalents). Only the value returned in the
** *pHighwater parameter to [sqlite3_status()] is of interest. 
** The value written into the *pCurrent parameter is undefined.</dd>)^
**
** [[SQLITE_STATUS_MALLOC_COUNT]] ^(<dt>SQLITE_STATUS_MALLOC_COUNT</dt>
** <dd>This parameter records the number of separate memory allocations
** currently checked out.</dd>)^
**
** [[SQLITE_STATUS_PAGECACHE_USED]] ^(<dt>SQLITE_STATUS_PAGECACHE_USED</dt>
** <dd>This parameter returns the number of pages used out of the
** [pagecache memory allocator] that was configured using 
** [SQLITE_CONFIG_PAGECACHE]. The
** value returned is in pages, not in bytes.</dd>)^
**
** [[SQLITE_STATUS_PAGECACHE_OVERFLOW]] 
** ^(<dt>SQLITE_STATUS_PAGECACHE_OVERFLOW</dt>
** <dd>This parameter returns the number of bytes of page cache
** allocation which could not be satisfied by the [SQLITE_CONFIG_PAGECACHE]
** buffer and where forced to overflow to [sqlite3_malloc()]. The
** returned value includes allocations that overflowed because they
** where too large (they were larger than the "sz" parameter to
** [SQLITE_CONFIG_PAGECACHE]) and allocations that overflowed because
** no space was left in the page cache.</dd>)^
**
** [[SQLITE_STATUS_PAGECACHE_SIZE]] ^(<dt>SQLITE_STATUS_PAGECACHE_SIZE</dt>
** <dd>This parameter records the largest memory allocation request
** handed to [pagecache memory allocator]. Only the value returned in the
** *pHighwater parameter to [sqlite3_status()] is of interest. 
** The value written into the *pCurrent parameter is undefined.</dd>)^
**
** [[SQLITE_STATUS_SCRATCH_USED]] ^(<dt>SQLITE_STATUS_SCRATCH_USED</dt>
** <dd>This parameter returns the number of allocations used out of the
** [scratch memory allocator] configured using
** [SQLITE_CONFIG_SCRATCH]. The value returned is in allocations, not
** in bytes. Since a single thread may only have one scratch allocation
** outstanding at time, this parameter also reports the number of threads
** using scratch memory at the same time.</dd>)^
**
** [[SQLITE_STATUS_SCRATCH_OVERFLOW]] ^(<dt>SQLITE_STATUS_SCRATCH_OVERFLOW</dt>
** <dd>This parameter returns the number of bytes of scratch memory
** allocation which could not be satisfied by the [SQLITE_CONFIG_SCRATCH]
** buffer and where forced to overflow to [sqlite3_malloc()]. The values
** returned include overflows because the requested allocation was too
** larger (that is, because the requested allocation was larger than the
** "sz" parameter to [SQLITE_CONFIG_SCRATCH]) and because no scratch buffer
** slots were available.
** </dd>)^
**
** [[SQLITE_STATUS_SCRATCH_SIZE]] ^(<dt>SQLITE_STATUS_SCRATCH_SIZE</dt>
** <dd>This parameter records the largest memory allocation request
** handed to [scratch memory allocator]. Only the value returned in the
** *pHighwater parameter to [sqlite3_status()] is of interest. 
** The value written into the *pCurrent parameter is undefined.</dd>)^
**
** [[SQLITE_STATUS_PARSER_STACK]] ^(<dt>SQLITE_STATUS_PARSER_STACK</dt>
** <dd>This parameter records the deepest parser stack. It is only
** meaningful if SQLite is compiled with [YYTRACKMAXSTACKDEPTH].</dd>)^
** </dl>
**
** New status parameters may be added from time to time.
*/
#define SQLITE_STATUS_MEMORY_USED 0
#define SQLITE_STATUS_PAGECACHE_USED 1
#define SQLITE_STATUS_PAGECACHE_OVERFLOW 2
#define SQLITE_STATUS_SCRATCH_USED 3
#define SQLITE_STATUS_SCRATCH_OVERFLOW 4
#define SQLITE_STATUS_MALLOC_SIZE 5
#define SQLITE_STATUS_PARSER_STACK 6
#define SQLITE_STATUS_PAGECACHE_SIZE 7
#define SQLITE_STATUS_SCRATCH_SIZE 8
#define SQLITE_STATUS_MALLOC_COUNT 9

/*
** CAPI3REF: Database Connection Status
** METHOD: sqlite3
**
** ^This interface is used to retrieve runtime status information 
** about a single [database connection].  ^The first argument is the
** database connection object to be interrogated.  ^The second argument
** is an integer constant, taken from the set of
** [SQLITE_DBSTATUS options], that
** determines the parameter to interrogate.  The set of 
** [SQLITE_DBSTATUS options] is likely
** to grow in future releases of SQLite.
**
** ^The current value of the requested parameter is written into *pCur
** and the highest instantaneous value is written into *pHiwtr.  ^If
** the resetFlg is true, then the highest instantaneous value is
** reset back down to the current value.
**
** ^The sqlite3_db_status() routine returns SQLITE_OK on success and a
** non-zero [error code] on failure.
**
** See also: [sqlite3_status()] and [sqlite3_stmt_status()].
*/
SQLITE_API int SQLITE_STDCALL sqlite3_db_status(sqlite3*, int op, int *pCur, int *pHiwtr, int resetFlg);

/*
** CAPI3REF: Status Parameters for database connections
** KEYWORDS: {SQLITE_DBSTATUS options}
**
** These constants are the available integer "verbs" that can be passed as
** the second argument to the [sqlite3_db_status()] interface.
**
** New verbs may be added in future releases of SQLite. Existing verbs
** might be discontinued. Applications should check the return code from
** [sqlite3_db_status()] to make sure that the call worked.
** The [sqlite3_db_status()] interface will return a non-zero error code
** if a discontinued or unsupported verb is invoked.
**
** <dl>
** [[SQLITE_DBSTATUS_LOOKASIDE_USED]] ^(<dt>SQLITE_DBSTATUS_LOOKASIDE_USED</dt>
** <dd>This parameter returns the number of lookaside memory slots currently
** checked out.</dd>)^
**
** [[SQLITE_DBSTATUS_LOOKASIDE_HIT]] ^(<dt>SQLITE_DBSTATUS_LOOKASIDE_HIT</dt>
** <dd>This parameter returns the number malloc attempts that were 
** satisfied using lookaside memory. Only the high-water value is meaningful;
** the current value is always zero.)^
**
** [[SQLITE_DBSTATUS_LOOKASIDE_MISS_SIZE]]
** ^(<dt>SQLITE_DBSTATUS_LOOKASIDE_MISS_SIZE</dt>
** <dd>This parameter returns the number malloc attempts that might have
** been satisfied using lookaside memory but failed due to the amount of
** memory requested being larger than the lookaside slot size.
** Only the high-water value is meaningful;
** the current value is always zero.)^
**
** [[SQLITE_DBSTATUS_LOOKASIDE_MISS_FULL]]
** ^(<dt>SQLITE_DBSTATUS_LOOKASIDE_MISS_FULL</dt>
** <dd>This parameter returns the number malloc attempts that might have
** been satisfied using lookaside memory but failed due to all lookaside
** memory already being in use.
** Only the high-water value is meaningful;
** the current value is always zero.)^
**
** [[SQLITE_DBSTATUS_CACHE_USED]] ^(<dt>SQLITE_DBSTATUS_CACHE_USED</dt>
** <dd>This parameter returns the approximate number of bytes of heap
** memory used by all pager caches associated with the database connection.)^
** ^The highwater mark associated with SQLITE_DBSTATUS_CACHE_USED is always 0.
**
** [[SQLITE_DBSTATUS_SCHEMA_USED]] ^(<dt>SQLITE_DBSTATUS_SCHEMA_USED</dt>
** <dd>This parameter returns the approximate number of bytes of heap
** memory used to store the schema for all databases associated
** with the connection - main, temp, and any [ATTACH]-ed databases.)^ 
** ^The full amount of memory used by the schemas is reported, even if the
** schema memory is shared with other database connections due to
** [shared cache mode] being enabled.
** ^The highwater mark associated with SQLITE_DBSTATUS_SCHEMA_USED is always 0.
**
** [[SQLITE_DBSTATUS_STMT_USED]] ^(<dt>SQLITE_DBSTATUS_STMT_USED</dt>
** <dd>This parameter returns the approximate number of bytes of heap
** and lookaside memory used by all prepared statements associated with
** the database connection.)^
** ^The highwater mark associated with SQLITE_DBSTATUS_STMT_USED is always 0.
** </dd>
**
** [[SQLITE_DBSTATUS_CACHE_HIT]] ^(<dt>SQLITE_DBSTATUS_CACHE_HIT</dt>
** <dd>This parameter returns the number of pager cache hits that have
** occurred.)^ ^The highwater mark associated with SQLITE_DBSTATUS_CACHE_HIT 
** is always 0.
** </dd>
**
** [[SQLITE_DBSTATUS_CACHE_MISS]] ^(<dt>SQLITE_DBSTATUS_CACHE_MISS</dt>
** <dd>This parameter returns the number of pager cache misses that have
** occurred.)^ ^The highwater mark associated with SQLITE_DBSTATUS_CACHE_MISS 
** is always 0.
** </dd>
**
** [[SQLITE_DBSTATUS_CACHE_WRITE]] ^(<dt>SQLITE_DBSTATUS_CACHE_WRITE</dt>
** <dd>This parameter returns the number of dirty cache entries that have
** been written to disk. Specifically, the number of pages written to the
** wal file in wal mode databases, or the number of pages written to the
** database file in rollback mode databases. Any pages written as part of
** transaction rollback or database recovery operations are not included.
** If an IO or other error occurs while writing a page to disk, the effect
** on subsequent SQLITE_DBSTATUS_CACHE_WRITE requests is undefined.)^ ^The
** highwater mark associated with SQLITE_DBSTATUS_CACHE_WRITE is always 0.
** </dd>
**
** [[SQLITE_DBSTATUS_DEFERRED_FKS]] ^(<dt>SQLITE_DBSTATUS_DEFERRED_FKS</dt>
** <dd>This parameter returns zero for the current value if and only if
** all foreign key constraints (deferred or immediate) have been
** resolved.)^ ^The highwater mark is always 0.
** </dd>
** </dl>
*/
#define SQLITE_DBSTATUS_LOOKASIDE_USED 0
#define SQLITE_DBSTATUS_CACHE_USED 1
#define SQLITE_DBSTATUS_SCHEMA_USED 2
#define SQLITE_DBSTATUS_STMT_USED 3
#define SQLITE_DBSTATUS_LOOKASIDE_HIT 4
#define SQLITE_DBSTATUS_LOOKASIDE_MISS_SIZE 5
#define SQLITE_DBSTATUS_LOOKASIDE_MISS_FULL 6
#define SQLITE_DBSTATUS_CACHE_HIT 7
#define SQLITE_DBSTATUS_CACHE_MISS 8
#define SQLITE_DBSTATUS_CACHE_WRITE 9
#define SQLITE_DBSTATUS_DEFERRED_FKS 10
#define SQLITE_DBSTATUS_MAX 10 /* Largest defined DBSTATUS */

/*
** CAPI3REF: Prepared Statement Status
** METHOD: sqlite3_stmt
**
** ^(Each prepared statement maintains various
** [SQLITE_STMTSTATUS counters] that measure the number
** of times it has performed specific operations.)^  These counters can
** be used to monitor the performance characteristics of the prepared
** statements.  For example, if the number of table steps greatly exceeds
** the number of table searches or result rows, that would tend to indicate
** that the prepared statement is using a full table scan rather than
** an index.  
**
** ^(This interface is used to retrieve and reset counter values from
** a [prepared statement].  The first argument is the prepared statement
** object to be interrogated.  The second argument
** is an integer code for a specific [SQLITE_STMTSTATUS counter]
** to be interrogated.)^
** ^The current value of the requested counter is returned.
** ^If the resetFlg is true, then the counter is reset to zero after this
** interface call returns.
**
** See also: [sqlite3_status()] and [sqlite3_db_status()].
*/
SQLITE_API int SQLITE_STDCALL sqlite3_stmt_status(sqlite3_stmt*, int op,int resetFlg);

/*
** CAPI3REF: Status Parameters for prepared statements
** KEYWORDS: {SQLITE_STMTSTATUS counter} {SQLITE_STMTSTATUS counters}
**
** These preprocessor macros define integer codes that name counter
** values associated with the [sqlite3_stmt_status()] interface.
** The meanings of the various counters are as follows:
**
** <dl>
** [[SQLITE_STMTSTATUS_FULLSCAN_STEP]] <dt>SQLITE_STMTSTATUS_FULLSCAN_STEP</dt>
** <dd>^This is the number of times that SQLite has stepped forward in
** a table as part of a full table scan. Large numbers for this counter
** may indicate opportunities for performance improvement through 
** careful use of indices.</dd>
**
** [[SQLITE_STMTSTATUS_SORT]] <dt>SQLITE_STMTSTATUS_SORT</dt>
** <dd>^This is the number of sort operations that have occurred.
** A non-zero value in this counter may indicate an opportunity to
** improvement performance through careful use of indices.</dd>
**
** [[SQLITE_STMTSTATUS_AUTOINDEX]] <dt>SQLITE_STMTSTATUS_AUTOINDEX</dt>
** <dd>^This is the number of rows inserted into transient indices that
** were created automatically in order to help joins run faster.
** A non-zero value in this counter may indicate an opportunity to
** improvement performance by adding permanent indices that do not
** need to be reinitialized each time the statement is run.</dd>
**
** [[SQLITE_STMTSTATUS_VM_STEP]] <dt>SQLITE_STMTSTATUS_VM_STEP</dt>
** <dd>^This is the number of virtual machine operations executed
** by the prepared statement if that number is less than or equal
** to 2147483647. The number of virtual machine operations can be 
** used as a proxy for the total work done by the prepared statement.
** If the number of virtual machine operations exceeds 2147483647
** then the value returned by this statement status code is undefined.
** </dd>
** </dl>
*/
#define SQLITE_STMTSTATUS_FULLSCAN_STEP 1
#define SQLITE_STMTSTATUS_SORT 2
#define SQLITE_STMTSTATUS_AUTOINDEX 3
#define SQLITE_STMTSTATUS_VM_STEP 4

/*
** CAPI3REF: Custom Page Cache Object
**
** The sqlite3_pcache type is opaque.  It is implemented by
** the pluggable module.  The SQLite core has no knowledge of
** its size or internal structure and never deals with the
** sqlite3_pcache object except by holding and passing pointers
** to the object.
**
** See [sqlite3_pcache_methods2] for additional information.
*/
typedef struct sqlite3_pcache sqlite3_pcache;

/*
** CAPI3REF: Custom Page Cache Object
**
** The sqlite3_pcache_page object represents a single page in the
** page cache.  The page cache will allocate instances of this
** object.  Various methods of the page cache use pointers to instances
** of this object as parameters or as their return value.
**
** See [sqlite3_pcache_methods2] for additional information.
*/
typedef struct sqlite3_pcache_page sqlite3_pcache_page;
struct sqlite3_pcache_page {
  void *pBuf;        /* The content of the page */
  void *pExtra;      /* Extra information associated with the page */
};

/*
** CAPI3REF: Application Defined Page Cache.
** KEYWORDS: {page cache}
**
** ^(The [sqlite3_config]([SQLITE_CONFIG_PCACHE2], ...) interface can
** register an alternative page cache implementation by passing in an 
** instance of the sqlite3_pcache_methods2 structure.)^
** In many applications, most of the heap memory allocated by 
** SQLite is used for the page cache.
** By implementing a 
** custom page cache using this API, an application can better control
** the amount of memory consumed by SQLite, the way in which 
** that memory is allocated and released, and the policies used to 
** determine exactly which parts of a database file are cached and for 
** how long.
**
** The alternative page cache mechanism is an
** extreme measure that is only needed by the most demanding applications.
** The built-in page cache is recommended for most uses.
**
** ^(The contents of the sqlite3_pcache_methods2 structure are copied to an
** internal buffer by SQLite within the call to [sqlite3_config]. Hence
** the application may discard the parameter after the call to
** [sqlite3_config()] returns.)^
**
** [[the xInit() page cache method]]
** ^(The xInit() method is called once for each effective 
** call to [sqlite3_initialize()])^
** (usually only once during the lifetime of the process). ^(The xInit()
** method is passed a copy of the sqlite3_pcache_methods2.pArg value.)^
** The intent of the xInit() method is to set up global data structures 
** required by the custom page cache implementation. 
** ^(If the xInit() method is NULL, then the 
** built-in default page cache is used instead of the application defined
** page cache.)^
**
** [[the xShutdown() page cache method]]
** ^The xShutdown() method is called by [sqlite3_shutdown()].
** It can be used to clean up 
** any outstanding resources before process shutdown, if required.
** ^The xShutdown() method may be NULL.
**
** ^SQLite automatically serializes calls to the xInit method,
** so the xInit method need not be threadsafe. ^The
** xShutdown method is only called from [sqlite3_shutdown()] so it does
** not need to be threadsafe either. All other methods must be threadsafe
** in multithreaded applications.
**
** ^SQLite will never invoke xInit() more than once without an intervening
** call to xShutdown().
**
** [[the xCreate() page cache methods]]
** ^SQLite invokes the xCreate() method to construct a new cache instance.
** SQLite will typically create one cache instance for each open database file,
** though this is not guaranteed. ^The
** first parameter, szPage, is the size in bytes of the pages that must
** be allocated by the cache. ^szPage will always a power of two. ^The
** second parameter szExtra is a number of bytes of extra storage 
** associated with each page cache entry. ^The szExtra parameter will
** a number less than 250. SQLite will use the
** extra szExtra bytes on each page to store metadata about the underlying
** database page on disk. The value passed into szExtra depends
** on the SQLite version, the target platform, and how SQLite was compiled.
** ^The third argument to xCreate(), bPurgeable, is true if the cache being
** created will be used to cache database pages of a file stored on disk, or
** false if it is used for an in-memory database. The cache implementation
** does not have to do anything special based with the value of bPurgeable;
** it is purely advisory. ^On a cache where bPurgeable is false, SQLite will
** never invoke xUnpin() except to deliberately delete a page.
** ^In other words, calls to xUnpin() on a cache with bPurgeable set to
** false will always have the "discard" flag set to true. 
** ^Hence, a cache created with bPurgeable false will
** never contain any unpinned pages.
**
** [[the xCachesize() page cache method]]
** ^(The xCachesize() method may be called at any time by SQLite to set the
** suggested maximum cache-size (number of pages stored by) the cache
** instance passed as the first argument. This is the value configured using
** the SQLite "[PRAGMA cache_size]" command.)^ As with the bPurgeable
** parameter, the implementation is not required to do anything with this
** value; it is advisory only.
**
** [[the xPagecount() page cache methods]]
** The xPagecount() method must return the number of pages currently
** stored in the cache, both pinned and unpinned.
** 
** [[the xFetch() page cache methods]]
** The xFetch() method locates a page in the cache and returns a pointer to 
** an sqlite3_pcache_page object associated with that page, or a NULL pointer.
** The pBuf element of the returned sqlite3_pcache_page object will be a
** pointer to a buffer of szPage bytes used to store the content of a 
** single database page. The pExtra element of sqlite3_pcache_page will be
** a pointer to the szExtra bytes of extra storage that SQLite has requested
** for each entry in the page cache.
**
** The page to be fetched is determined by the key. ^The minimum key value
** is 1. After it has been retrieved using xFetch, the page is considered
** to be "pinned".
**
** If the requested page is already in the page cache, then the page cache
** implementation must return a pointer to the page buffer with its content
** intact. If the requested page is not already in the cache, then the
** cache implementation should use the value of the createFlag
** parameter to help it determined what action to take:
**
** <table border=1 width=85% align=center>
** <tr><th> createFlag <th> Behavior when page is not already in cache
** <tr><td> 0 <td> Do not allocate a new page. Return NULL.
** <tr><td> 1 <td> Allocate a new page if it easy and convenient to do so.
** Otherwise return NULL.
** <tr><td> 2 <td> Make every effort to allocate a new page. Only return
** NULL if allocating a new page is effectively impossible.
** </table>
**
** ^(SQLite will normally invoke xFetch() with a createFlag of 0 or 1. SQLite
** will only use a createFlag of 2 after a prior call with a createFlag of 1
** failed.)^ In between the to xFetch() calls, SQLite may
** attempt to unpin one or more cache pages by spilling the content of
** pinned pages to disk and synching the operating system disk cache.
**
** [[the xUnpin() page cache method]]
** ^xUnpin() is called by SQLite with a pointer to a currently pinned page
** as its second argument. If the third parameter, discard, is non-zero,
** then the page must be evicted from the cache.
** ^If the discard parameter is
** zero, then the page may be discarded or retained at the discretion of
** page cache implementation. ^The page cache implementation
** may choose to evict unpinned pages at any time.
**
** The cache must not perform any reference counting. A single 
** call to xUnpin() unpins the page regardless of the number of prior calls 
** to xFetch().
**
** [[the xRekey() page cache methods]]
** The xRekey() method is used to change the key value associated with the
** page passed as the second argument. If the cache
** previously contains an entry associated with newKey, it must be
** discarded. ^Any prior cache entry associated with newKey is guaranteed not
** to be pinned.
**
** When SQLite calls the xTruncate() method, the cache must discard all
** existing cache entries with page numbers (keys) greater than or equal
** to the value of the iLimit parameter passed to xTruncate(). If any
** of these pages are pinned, they are implicitly unpinned, meaning that
** they can be safely discarded.
**
** [[the xDestroy() page cache method]]
** ^The xDestroy() method is used to delete a cache allocated by xCreate().
** All resources associated with the specified cache should be freed. ^After
** calling the xDestroy() method, SQLite considers the [sqlite3_pcache*]
** handle invalid, and will not use it with any other sqlite3_pcache_methods2
** functions.
**
** [[the xShrink() page cache method]]
** ^SQLite invokes the xShrink() method when it wants the page cache to
** free up as much of heap memory as possible. The page cache implementation
** is not obligated to free any memory, but well-behaved implementations should
** do their best.
*/
typedef struct sqlite3_pcache_methods2 sqlite3_pcache_methods2;
struct sqlite3_pcache_methods2 {
 int iVersion;
 void *pArg;
 int (*xInit)(void*);
 void (*xShutdown)(void*);
 sqlite3_pcache *(*xCreate)(int szPage, int szExtra, int bPurgeable);
 void (*xCachesize)(sqlite3_pcache*, int nCachesize);
 int (*xPagecount)(sqlite3_pcache*);
 sqlite3_pcache_page *(*xFetch)(sqlite3_pcache*, unsigned key, int createFlag);
 void (*xUnpin)(sqlite3_pcache*, sqlite3_pcache_page*, int discard);
 void (*xRekey)(sqlite3_pcache*, sqlite3_pcache_page*, 
 unsigned oldKey, unsigned newKey);
 void (*xTruncate)(sqlite3_pcache*, unsigned iLimit);
 void (*xDestroy)(sqlite3_pcache*);
 void (*xShrink)(sqlite3_pcache*);
};

/*
** This is the obsolete pcache_methods object that has now been replaced
** by sqlite3_pcache_methods2.  This object is not used by SQLite.  It is
** retained in the header file for backwards compatibility only.
*/
typedef struct sqlite3_pcache_methods sqlite3_pcache_methods;
struct sqlite3_pcache_methods {
  void *pArg;
  int (*xInit)(void*);
  void (*xShutdown)(void*);
  sqlite3_pcache *(*xCreate)(int szPage, int bPurgeable);
  void (*xCachesize)(sqlite3_pcache*, int nCachesize);
  int (*xPagecount)(sqlite3_pcache*);
  void *(*xFetch)(sqlite3_pcache*, unsigned key, int createFlag);
  void (*xUnpin)(sqlite3_pcache*, void*, int discard);
  void (*xRekey)(sqlite3_pcache*, void*, unsigned oldKey, unsigned newKey);
  void (*xTruncate)(sqlite3_pcache*, unsigned iLimit);
  void (*xDestroy)(sqlite3_pcache*);
};

/*
** CAPI3REF: Online Backup Object
**
** The sqlite3_backup object records state information about an ongoing
** online backup operation.  ^The sqlite3_backup object is created by
** a call to [sqlite3_backup_init()] and is destroyed by a call to
** [sqlite3_backup_finish()].
**
** See Also: [Using the SQLite Online Backup API]
*/
typedef struct sqlite3_backup sqlite3_backup;

/*
** CAPI3REF: Online Backup API.
**
** The backup API copies the content of one database into another.
** It is useful either for creating backups of databases or
** for copying in-memory databases to or from persistent files. 
**
** See Also: [Using the SQLite Online Backup API]
**
** ^SQLite holds a write transaction open on the destination database file
** for the duration of the backup operation.
** ^The source database is read-locked only while it is being read;
** it is not locked continuously for the entire backup operation.
** ^Thus, the backup may be performed on a live source database without
** preventing other database connections from
** reading or writing to the source database while the backup is underway.
** 
** ^(To perform a backup operation: 
** <ol>
** <li>sqlite3_backup_init() is called once to initialize the
** backup, 
** <li>sqlite3_backup_step() is called one or more times to transfer 
** the data between the two databases, and finally
** <li>sqlite3_backup_finish() is called to release all resources 
** associated with the backup operation. 
** </ol>)^
** There should be exactly one call to sqlite3_backup_finish() for each
** successful call to sqlite3_backup_init().
**
** [[sqlite3_backup_init()]] sqlite3_backup_init()
**
** ^The D and N arguments to sqlite3_backup_init(D,N,S,M) are the 
** [database connection] associated with the destination database 
** and the database name, respectively.
** ^The database name is "main" for the main database, "temp" for the
** temporary database, or the name specified after the AS keyword in
** an [ATTACH] statement for an attached database.
** ^The S and M arguments passed to 
** sqlite3_backup_init(D,N,S,M) identify the [database connection]
** and database name of the source database, respectively.
** ^The source and destination [database connections] (parameters S and D)
** must be different or else sqlite3_backup_init(D,N,S,M) will fail with
** an error.
**
** ^A call to sqlite3_backup_init() will fail, returning SQLITE_ERROR, if 
** there is already a read or read-write transaction open on the 
** destination database.
**
** ^If an error occurs within sqlite3_backup_init(D,N,S,M), then NULL is
** returned and an error code and error message are stored in the
** destination [database connection] D.
** ^The error code and message for the failed call to sqlite3_backup_init()
** can be retrieved using the [sqlite3_errcode()], [sqlite3_errmsg()], and/or
** [sqlite3_errmsg16()] functions.
** ^A successful call to sqlite3_backup_init() returns a pointer to an
** [sqlite3_backup] object.
** ^The [sqlite3_backup] object may be used with the sqlite3_backup_step() and
** sqlite3_backup_finish() functions to perform the specified backup 
** operation.
**
** [[sqlite3_backup_step()]] sqlite3_backup_step()
**
** ^Function sqlite3_backup_step(B,N) will copy up to N pages between 
** the source and destination databases specified by [sqlite3_backup] object B.
** ^If N is negative, all remaining source pages are copied. 
** ^If sqlite3_backup_step(B,N) successfully copies N pages and there
** are still more pages to be copied, then the function returns [SQLITE_OK].
** ^If sqlite3_backup_step(B,N) successfully finishes copying all pages
** from source to destination, then it returns [SQLITE_DONE].
** ^If an error occurs while running sqlite3_backup_step(B,N),
** then an [error code] is returned. ^As well as [SQLITE_OK] and
** [SQLITE_DONE], a call to sqlite3_backup_step() may return [SQLITE_READONLY],
** [SQLITE_NOMEM], [SQLITE_BUSY], [SQLITE_LOCKED], or an
** [SQLITE_IOERR_ACCESS | SQLITE_IOERR_XXX] extended error code.
**
** ^(The sqlite3_backup_step() might return [SQLITE_READONLY] if
** <ol>
** <li> the destination database was opened read-only, or
** <li> the destination database is using write-ahead-log journaling
** and the destination and source page sizes differ, or
** <li> the destination database is an in-memory database and the
** destination and source page sizes differ.
** </ol>)^
**
** ^If sqlite3_backup_step() cannot obtain a required file-system lock, then
** the [sqlite3_busy_handler | busy-handler function]
** is invoked (if one is specified). ^If the 
** busy-handler returns non-zero before the lock is available, then 
** [SQLITE_BUSY] is returned to the caller. ^In this case the call to
** sqlite3_backup_step() can be retried later. ^If the source
** [database connection]
** is being used to write to the source database when sqlite3_backup_step()
** is called, then [SQLITE_LOCKED] is returned immediately. ^Again, in this
** case the call to sqlite3_backup_step() can be retried later on. ^(If
** [SQLITE_IOERR_ACCESS | SQLITE_IOERR_XXX], [SQLITE_NOMEM], or
** [SQLITE_READONLY] is returned, then 
** there is no point in retrying the call to sqlite3_backup_step(). These 
** errors are considered fatal.)^ The application must accept 
** that the backup operation has failed and pass the backup operation handle 
** to the sqlite3_backup_finish() to release associated resources.
**
** ^The first call to sqlite3_backup_step() obtains an exclusive lock
** on the destination file. ^The exclusive lock is not released until either 
** sqlite3_backup_finish() is called or the backup operation is complete 
** and sqlite3_backup_step() returns [SQLITE_DONE]. ^Every call to
** sqlite3_backup_step() obtains a [shared lock] on the source database that
** lasts for the duration of the sqlite3_backup_step() call.
** ^Because the source database is not locked between calls to
** sqlite3_backup_step(), the source database may be modified mid-way
** through the backup process. ^If the source database is modified by an
** external process or via a database connection other than the one being
** used by the backup operation, then the backup will be automatically
** restarted by the next call to sqlite3_backup_step(). ^If the source 
** database is modified by the using the same database connection as is used
** by the backup operation, then the backup database is automatically
** updated at the same time.
**
** [[sqlite3_backup_finish()]] sqlite3_backup_finish()
**
** When sqlite3_backup_step() has returned [SQLITE_DONE], or when the 
** application wishes to abandon the backup operation, the application
** should destroy the [sqlite3_backup] by passing it to sqlite3_backup_finish().
** ^The sqlite3_backup_finish() interfaces releases all
** resources associated with the [sqlite3_backup] object. 
** ^If sqlite3_backup_step() has not yet returned [SQLITE_DONE], then any
** active write-transaction on the destination database is rolled back.
** The [sqlite3_backup] object is invalid
** and may not be used following a call to sqlite3_backup_finish().
**
** ^The value returned by sqlite3_backup_finish is [SQLITE_OK] if no
** sqlite3_backup_step() errors occurred, regardless or whether or not
** sqlite3_backup_step() completed.
** ^If an out-of-memory condition or IO error occurred during any prior
** sqlite3_backup_step() call on the same [sqlite3_backup] object, then
** sqlite3_backup_finish() returns the corresponding [error code].
**
** ^A return of [SQLITE_BUSY] or [SQLITE_LOCKED] from sqlite3_backup_step()
** is not a permanent error and does not affect the return value of
** sqlite3_backup_finish().
**
** [[sqlite3_backup_remaining()]] [[sqlite3_backup_pagecount()]]
** sqlite3_backup_remaining() and sqlite3_backup_pagecount()
**
** ^The sqlite3_backup_remaining() routine returns the number of pages still
** to be backed up at the conclusion of the most recent sqlite3_backup_step().
** ^The sqlite3_backup_pagecount() routine returns the total number of pages
** in the source database at the conclusion of the most recent
** sqlite3_backup_step().
** ^(The values returned by these functions are only updated by
** sqlite3_backup_step(). If the source database is modified in a way that
** changes the size of the source database or the number of pages remaining,
** those changes are not reflected in the output of sqlite3_backup_pagecount()
** and sqlite3_backup_remaining() until after the next
** sqlite3_backup_step().)^
**
** Concurrent Usage of Database Handles
**
** ^The source [database connection] may be used by the application for other
** purposes while a backup operation is underway or being initialized.
** ^If SQLite is compiled and configured to support threadsafe database
** connections, then the source database connection may be used concurrently
** from within other threads.
**
** However, the application must guarantee that the destination 
** [database connection] is not passed to any other API (by any thread) after 
** sqlite3_backup_init() is called and before the corresponding call to
** sqlite3_backup_finish(). SQLite does not currently check to see
** if the application incorrectly accesses the destination [database connection]
** and so no error code is reported, but the operations may malfunction
** nevertheless. Use of the destination database connection while a
** backup is in progress might also also cause a mutex deadlock.
**
** If running in [shared cache mode], the application must
** guarantee that the shared cache used by the destination database
** is not accessed while the backup is running. In practice this means
** that the application must guarantee that the disk file being 
** backed up to is not accessed by any connection within the process,
** not just the specific connection that was passed to sqlite3_backup_init().
**
** The [sqlite3_backup] object itself is partially threadsafe. Multiple 
** threads may safely make multiple concurrent calls to sqlite3_backup_step().
** However, the sqlite3_backup_remaining() and sqlite3_backup_pagecount()
** APIs are not strictly speaking threadsafe. If they are invoked at the
** same time as another thread is invoking sqlite3_backup_step() it is
** possible that they return invalid values.
*/
SQLITE_API sqlite3_backup *SQLITE_STDCALL sqlite3_backup_init(
 sqlite3 *pDest, /* Destination database handle */
 const char *zDestName, /* Destination database name */
 sqlite3 *pSource, /* Source database handle */
 const char *zSourceName /* Source database name */
);
SQLITE_API int SQLITE_STDCALL sqlite3_backup_step(sqlite3_backup *p, int nPage);
SQLITE_API int SQLITE_STDCALL sqlite3_backup_finish(sqlite3_backup *p);
SQLITE_API int SQLITE_STDCALL sqlite3_backup_remaining(sqlite3_backup *p);
SQLITE_API int SQLITE_STDCALL sqlite3_backup_pagecount(sqlite3_backup *p);

/*
** CAPI3REF: Unlock Notification
** METHOD: sqlite3
**
** ^When running in shared-cache mode, a database operation may fail with
** an [SQLITE_LOCKED] error if the required locks on the shared-cache or
** individual tables within the shared-cache cannot be obtained. See
** [SQLite Shared-Cache Mode] for a description of shared-cache locking. 
** ^This API may be used to register a callback that SQLite will invoke 
** when the connection currently holding the required lock relinquishes it.
** ^This API is only available if the library was compiled with the
** [SQLITE_ENABLE_UNLOCK_NOTIFY] C-preprocessor symbol defined.
**
** See Also: [Using the SQLite Unlock Notification Feature].
**
** ^Shared-cache locks are released when a database connection concludes
** its current transaction, either by committing it or rolling it back. 
**
** ^When a connection (known as the blocked connection) fails to obtain a
** shared-cache lock and SQLITE_LOCKED is returned to the caller, the
** identity of the database connection (the blocking connection) that
** has locked the required resource is stored internally. ^After an 
** application receives an SQLITE_LOCKED error, it may call the
** sqlite3_unlock_notify() method with the blocked connection handle as 
** the first argument to register for a callback that will be invoked
** when the blocking connections current transaction is concluded. ^The
** callback is invoked from within the [sqlite3_step] or [sqlite3_close]
** call that concludes the blocking connections transaction.
**
** ^(If sqlite3_unlock_notify() is called in a multi-threaded application,
** there is a chance that the blocking connection will have already
** concluded its transaction by the time sqlite3_unlock_notify() is invoked.
** If this happens, then the specified callback is invoked immediately,
** from within the call to sqlite3_unlock_notify().)^
**
** ^If the blocked connection is attempting to obtain a write-lock on a
** shared-cache table, and more than one other connection currently holds
** a read-lock on the same table, then SQLite arbitrarily selects one of 
** the other connections to use as the blocking connection.
**
** ^(There may be at most one unlock-notify callback registered by a 
** blocked connection. If sqlite3_unlock_notify() is called when the
** blocked connection already has a registered unlock-notify callback,
** then the new callback replaces the old.)^ ^If sqlite3_unlock_notify() is
** called with a NULL pointer as its second argument, then any existing
** unlock-notify callback is canceled. ^The blocked connections 
** unlock-notify callback may also be canceled by closing the blocked
** connection using [sqlite3_close()].
**
** The unlock-notify callback is not reentrant. If an application invokes
** any sqlite3_xxx API functions from within an unlock-notify callback, a
** crash or deadlock may be the result.
**
** ^Unless deadlock is detected (see below), sqlite3_unlock_notify() always
** returns SQLITE_OK.
**
** Callback Invocation Details
**
** When an unlock-notify callback is registered, the application provides a 
** single void* pointer that is passed to the callback when it is invoked.
** However, the signature of the callback function allows SQLite to pass
** it an array of void* context pointers. The first argument passed to
** an unlock-notify callback is a pointer to an array of void* pointers,
** and the second is the number of entries in the array.
**
** When a blocking connections transaction is concluded, there may be
** more than one blocked connection that has registered for an unlock-notify
** callback. ^If two or more such blocked connections have specified the
** same callback function, then instead of invoking the callback function
** multiple times, it is invoked once with the set of void* context pointers
** specified by the blocked connections bundled together into an array.
** This gives the application an opportunity to prioritize any actions 
** related to the set of unblocked database connections.
**
** Deadlock Detection
**
** Assuming that after registering for an unlock-notify callback a 
** database waits for the callback to be issued before taking any further
** action (a reasonable assumption), then using this API may cause the
** application to deadlock. For example, if connection X is waiting for
** connection Y's transaction to be concluded, and similarly connection
** Y is waiting on connection X's transaction, then neither connection
** will proceed and the system may remain deadlocked indefinitely.
**
** To avoid this scenario, the sqlite3_unlock_notify() performs deadlock
** detection. ^If a given call to sqlite3_unlock_notify() would put the
** system in a deadlocked state, then SQLITE_LOCKED is returned and no
** unlock-notify callback is registered. The system is said to be in
** a deadlocked state if connection A has registered for an unlock-notify
** callback on the conclusion of connection B's transaction, and connection
** B has itself registered for an unlock-notify callback when connection
** A's transaction is concluded. ^Indirect deadlock is also detected, so
** the system is also considered to be deadlocked if connection B has
** registered for an unlock-notify callback on the conclusion of connection
** C's transaction, where connection C is waiting on connection A. ^Any
** number of levels of indirection are allowed.
**
** The "DROP TABLE" Exception
**
** When a call to [sqlite3_step()] returns SQLITE_LOCKED, it is almost 
** always appropriate to call sqlite3_unlock_notify(). There is however,
** one exception. When executing a "DROP TABLE" or "DROP INDEX" statement,
** SQLite checks if there are any currently executing SELECT statements
** that belong to the same connection. If there are, SQLITE_LOCKED is
** returned. In this case there is no "blocking connection", so invoking
** sqlite3_unlock_notify() results in the unlock-notify callback being
** invoked immediately. If the application then re-attempts the "DROP TABLE"
** or "DROP INDEX" query, an infinite loop might be the result.
**
** One way around this problem is to check the extended error code returned
** by an sqlite3_step() call. ^(If there is a blocking connection, then the
** extended error code is set to SQLITE_LOCKED_SHAREDCACHE. Otherwise, in
** the special "DROP TABLE/INDEX" case, the extended error code is just 
** SQLITE_LOCKED.)^
*/
SQLITE_API int SQLITE_STDCALL sqlite3_unlock_notify(
 sqlite3 *pBlocked, /* Waiting connection */
 void (*xNotify)(void **apArg, int nArg), /* Callback function to invoke */
 void *pNotifyArg /* Argument to pass to xNotify */
);

/*
** CAPI3REF: String Comparison
**
** ^The [sqlite3_stricmp()] and [sqlite3_strnicmp()] APIs allow applications
** and extensions to compare the contents of two buffers containing UTF-8
** strings in a case-independent fashion, using the same definition of "case
** independence" that SQLite uses internally when comparing identifiers.
*/
SQLITE_API int SQLITE_STDCALL sqlite3_stricmp(const char *, const char *);
SQLITE_API int SQLITE_STDCALL sqlite3_strnicmp(const char *, const char *, int);

/*
** CAPI3REF: String Globbing
*
** ^The [sqlite3_strglob(P,X)] interface returns zero if string X matches
** the glob pattern P, and it returns non-zero if string X does not match
** the glob pattern P.  ^The definition of glob pattern matching used in
** [sqlite3_strglob(P,X)] is the same as for the "X GLOB P" operator in the
** SQL dialect used by SQLite.  ^The sqlite3_strglob(P,X) function is case
** sensitive.
**
** Note that this routine returns zero on a match and non-zero if the strings
** do not match, the same as [sqlite3_stricmp()] and [sqlite3_strnicmp()].
*/
SQLITE_API int SQLITE_STDCALL sqlite3_strglob(const char *zGlob, const char *zStr);

/*
** CAPI3REF: Error Logging Interface
**
** ^The [sqlite3_log()] interface writes a message into the [error log]
** established by the [SQLITE_CONFIG_LOG] option to [sqlite3_config()].
** ^If logging is enabled, the zFormat string and subsequent arguments are
** used with [sqlite3_snprintf()] to generate the final output string.
**
** The sqlite3_log() interface is intended for use by extensions such as
** virtual tables, collating functions, and SQL functions.  While there is
** nothing to prevent an application from calling sqlite3_log(), doing so
** is considered bad form.
**
** The zFormat string must not be NULL.
**
** To avoid deadlocks and other threading problems, the sqlite3_log() routine
** will not use dynamically allocated memory.  The log message is stored in
** a fixed-length buffer on the stack.  If the log message is longer than
** a few hundred characters, it will be truncated to the length of the
** buffer.
*/
SQLITE_API void SQLITE_CDECL sqlite3_log(int iErrCode, const char *zFormat, ...);

/*
** CAPI3REF: Write-Ahead Log Commit Hook
** METHOD: sqlite3
**
** ^The [sqlite3_wal_hook()] function is used to register a callback that
** is invoked each time data is committed to a database in wal mode.
**
** ^(The callback is invoked by SQLite after the commit has taken place and 
** the associated write-lock on the database released)^, so the implementation 
** may read, write or [checkpoint] the database as required.
**
** ^The first parameter passed to the callback function when it is invoked
** is a copy of the third parameter passed to sqlite3_wal_hook() when
** registering the callback. ^The second is a copy of the database handle.
** ^The third parameter is the name of the database that was written to -
** either "main" or the name of an [ATTACH]-ed database. ^The fourth parameter
** is the number of pages currently in the write-ahead log file,
** including those that were just committed.
**
** The callback function should normally return [SQLITE_OK].  ^If an error
** code is returned, that error will propagate back up through the
** SQLite code base to cause the statement that provoked the callback
** to report an error, though the commit will have still occurred. If the
** callback returns [SQLITE_ROW] or [SQLITE_DONE], or if it returns a value
** that does not correspond to any valid SQLite error code, the results
** are undefined.
**
** A single database handle may have at most a single write-ahead log callback 
** registered at one time. ^Calling [sqlite3_wal_hook()] replaces any
** previously registered write-ahead log callback. ^Note that the
** [sqlite3_wal_autocheckpoint()] interface and the
** [wal_autocheckpoint pragma] both invoke [sqlite3_wal_hook()] and will
** those overwrite any prior [sqlite3_wal_hook()] settings.
*/
SQLITE_API void *SQLITE_STDCALL sqlite3_wal_hook(
  sqlite3*, 
  int(*)(void *,sqlite3*,const char*,int),
  void*
);

/*
** CAPI3REF: Configure an auto-checkpoint
** METHOD: sqlite3
**
** ^The [sqlite3_wal_autocheckpoint(D,N)] is a wrapper around
** [sqlite3_wal_hook()] that causes any database on [database connection] D
** to automatically [checkpoint]
** after committing a transaction if there are N or
** more frames in the [write-ahead log] file.  ^Passing zero or 
** a negative value as the nFrame parameter disables automatic
** checkpoints entirely.
**
** ^The callback registered by this function replaces any existing callback
** registered using [sqlite3_wal_hook()].  ^Likewise, registering a callback
** using [sqlite3_wal_hook()] disables the automatic checkpoint mechanism
** configured by this function.
**
** ^The [wal_autocheckpoint pragma] can be used to invoke this interface
** from SQL.
**
** ^Checkpoints initiated by this mechanism are
** [sqlite3_wal_checkpoint_v2|PASSIVE].
**
** ^Every new [database connection] defaults to having the auto-checkpoint
** enabled with a threshold of 1000 or [SQLITE_DEFAULT_WAL_AUTOCHECKPOINT]
** pages.  The use of this interface
** is only necessary if the default setting is found to be suboptimal
** for a particular application.
*/
SQLITE_API int SQLITE_STDCALL sqlite3_wal_autocheckpoint(sqlite3 *db, int N);

/*
** CAPI3REF: Checkpoint a database
** METHOD: sqlite3
**
** ^(The sqlite3_wal_checkpoint(D,X) is equivalent to
** [sqlite3_wal_checkpoint_v2](D,X,[SQLITE_CHECKPOINT_PASSIVE],0,0).)^
**
** In brief, sqlite3_wal_checkpoint(D,X) causes the content in the 
** [write-ahead log] for database X on [database connection] D to be
** transferred into the database file and for the write-ahead log to
** be reset.  See the [checkpointing] documentation for addition
** information.
**
** This interface used to be the only way to cause a checkpoint to
** occur.  But then the newer and more powerful [sqlite3_wal_checkpoint_v2()]
** interface was added.  This interface is retained for backwards
** compatibility and as a convenience for applications that need to manually
** start a callback but which do not need the full power (and corresponding
** complication) of [sqlite3_wal_checkpoint_v2()].
*/
SQLITE_API int SQLITE_STDCALL sqlite3_wal_checkpoint(sqlite3 *db, const char *zDb);

/*
** CAPI3REF: Checkpoint a database
** METHOD: sqlite3
**
** ^(The sqlite3_wal_checkpoint_v2(D,X,M,L,C) interface runs a checkpoint
** operation on database X of [database connection] D in mode M. Status
** information is written back into integers pointed to by L and C.)^
** ^(The M parameter must be a valid [checkpoint mode]:)^
**
** <dl>
** <dt>SQLITE_CHECKPOINT_PASSIVE<dd>
** ^Checkpoint as many frames as possible without waiting for any database 
** readers or writers to finish, then sync the database file if all frames 
** in the log were checkpointed. ^The [busy-handler callback]
** is never invoked in the SQLITE_CHECKPOINT_PASSIVE mode. 
** ^On the other hand, passive mode might leave the checkpoint unfinished
** if there are concurrent readers or writers.
**
** <dt>SQLITE_CHECKPOINT_FULL<dd>
** ^This mode blocks (it invokes the
** [sqlite3_busy_handler|busy-handler callback]) until there is no
** database writer and all readers are reading from the most recent database
** snapshot. ^It then checkpoints all frames in the log file and syncs the
** database file. ^This mode blocks new database writers while it is pending,
** but new database readers are allowed to continue unimpeded.
**
** <dt>SQLITE_CHECKPOINT_RESTART<dd>
** ^This mode works the same way as SQLITE_CHECKPOINT_FULL with the addition
** that after checkpointing the log file it blocks (calls the 
** [busy-handler callback])
** until all readers are reading from the database file only. ^This ensures 
** that the next writer will restart the log file from the beginning.
** ^Like SQLITE_CHECKPOINT_FULL, this mode blocks new
** database writer attempts while it is pending, but does not impede readers.
**
** <dt>SQLITE_CHECKPOINT_TRUNCATE<dd>
** ^This mode works the same way as SQLITE_CHECKPOINT_RESTART with the
** addition that it also truncates the log file to zero bytes just prior
** to a successful return.
** </dl>
**
** ^If pnLog is not NULL, then *pnLog is set to the total number of frames in
** the log file or to -1 if the checkpoint could not run because
** of an error or because the database is not in [WAL mode]. ^If pnCkpt is not
** NULL,then *pnCkpt is set to the total number of checkpointed frames in the
** log file (including any that were already checkpointed before the function
** was called) or to -1 if the checkpoint could not run due to an error or
** because the database is not in WAL mode. ^Note that upon successful
** completion of an SQLITE_CHECKPOINT_TRUNCATE, the log file will have been
** truncated to zero bytes and so both *pnLog and *pnCkpt will be set to zero.
**
** ^All calls obtain an exclusive "checkpoint" lock on the database file. ^If
** any other process is running a checkpoint operation at the same time, the 
** lock cannot be obtained and SQLITE_BUSY is returned. ^Even if there is a 
** busy-handler configured, it will not be invoked in this case.
**
** ^The SQLITE_CHECKPOINT_FULL, RESTART and TRUNCATE modes also obtain the 
** exclusive "writer" lock on the database file. ^If the writer lock cannot be
** obtained immediately, and a busy-handler is configured, it is invoked and
** the writer lock retried until either the busy-handler returns 0 or the lock
** is successfully obtained. ^The busy-handler is also invoked while waiting for
** database readers as described above. ^If the busy-handler returns 0 before
** the writer lock is obtained or while waiting for database readers, the
** checkpoint operation proceeds from that point in the same way as 
** SQLITE_CHECKPOINT_PASSIVE - checkpointing as many frames as possible 
** without blocking any further. ^SQLITE_BUSY is returned in this case.
**
** ^If parameter zDb is NULL or points to a zero length string, then the
** specified operation is attempted on all WAL databases [attached] to 
** [database connection] db. In this case the
** values written to output parameters *pnLog and *pnCkpt are undefined. ^If 
** an SQLITE_BUSY error is encountered when processing one or more of the 
** attached WAL databases, the operation is still attempted on any remaining 
** attached databases and SQLITE_BUSY is returned at the end. ^If any other 
** error occurs while processing an attached database, processing is abandoned 
** and the error code is returned to the caller immediately. ^If no error 
** (SQLITE_BUSY or otherwise) is encountered while processing the attached 
** databases, SQLITE_OK is returned.
**
** ^If database zDb is the name of an attached database that is not in WAL
** mode, SQLITE_OK is returned and both *pnLog and *pnCkpt set to -1. ^If
** zDb is not NULL (or a zero length string) and is not the name of any
** attached database, SQLITE_ERROR is returned to the caller.
**
** ^Unless it returns SQLITE_MISUSE,
** the sqlite3_wal_checkpoint_v2() interface
** sets the error information that is queried by
** [sqlite3_errcode()] and [sqlite3_errmsg()].
**
** ^The [PRAGMA wal_checkpoint] command can be used to invoke this interface
** from SQL.
*/
SQLITE_API int SQLITE_STDCALL sqlite3_wal_checkpoint_v2(
 sqlite3 *db, /* Database handle */
 const char *zDb, /* Name of attached database (or NULL) */
 int eMode, /* SQLITE_CHECKPOINT_* value */
 int *pnLog, /* OUT: Size of WAL log in frames */
 int *pnCkpt /* OUT: Total number of frames checkpointed */
);

/*
** CAPI3REF: Checkpoint Mode Values
** KEYWORDS: {checkpoint mode}
**
** These constants define all valid values for the "checkpoint mode" passed
** as the third parameter to the [sqlite3_wal_checkpoint_v2()] interface.
** See the [sqlite3_wal_checkpoint_v2()] documentation for details on the
** meaning of each of these checkpoint modes.
*/
#define SQLITE_CHECKPOINT_PASSIVE  0  /* Do as much as possible w/o blocking */
#define SQLITE_CHECKPOINT_FULL     1  /* Wait for writers, then checkpoint */
#define SQLITE_CHECKPOINT_RESTART  2  /* Like FULL but wait for for readers */
#define SQLITE_CHECKPOINT_TRUNCATE 3  /* Like RESTART but also truncate WAL */

/*
** CAPI3REF: Virtual Table Interface Configuration
**
** This function may be called by either the [xConnect] or [xCreate] method
** of a [virtual table] implementation to configure
** various facets of the virtual table interface.
**
** If this interface is invoked outside the context of an xConnect or
** xCreate virtual table method then the behavior is undefined.
**
** At present, there is only one option that may be configured using
** this function. (See [SQLITE_VTAB_CONSTRAINT_SUPPORT].)  Further options
** may be added in the future.
*/
SQLITE_API int SQLITE_CDECL sqlite3_vtab_config(sqlite3*, int op, ...);

/*
** CAPI3REF: Virtual Table Configuration Options
**
** These macros define the various options to the
** [sqlite3_vtab_config()] interface that [virtual table] implementations
** can use to customize and optimize their behavior.
**
** <dl>
** <dt>SQLITE_VTAB_CONSTRAINT_SUPPORT
** <dd>Calls of the form
** [sqlite3_vtab_config](db,SQLITE_VTAB_CONSTRAINT_SUPPORT,X) are supported,
** where X is an integer. If X is zero, then the [virtual table] whose
** [xCreate] or [xConnect] method invoked [sqlite3_vtab_config()] does not
** support constraints. In this configuration (which is the default) if
** a call to the [xUpdate] method returns [SQLITE_CONSTRAINT], then the entire
** statement is rolled back as if [ON CONFLICT | OR ABORT] had been
** specified as part of the users SQL statement, regardless of the actual
** ON CONFLICT mode specified.
**
** If X is non-zero, then the virtual table implementation guarantees
** that if [xUpdate] returns [SQLITE_CONSTRAINT], it will do so before
** any modifications to internal or persistent data structures have been made.
** If the [ON CONFLICT] mode is ABORT, FAIL, IGNORE or ROLLBACK, SQLite 
** is able to roll back a statement or database transaction, and abandon
** or continue processing the current SQL statement as appropriate. 
** If the ON CONFLICT mode is REPLACE and the [xUpdate] method returns
** [SQLITE_CONSTRAINT], SQLite handles this as if the ON CONFLICT mode
** had been ABORT.
**
** Virtual table implementations that are required to handle OR REPLACE
** must do so within the [xUpdate] method. If a call to the 
** [sqlite3_vtab_on_conflict()] function indicates that the current ON 
** CONFLICT policy is REPLACE, the virtual table implementation should 
** silently replace the appropriate rows within the xUpdate callback and
** return SQLITE_OK. Or, if this is not possible, it may return
** SQLITE_CONSTRAINT, in which case SQLite falls back to OR ABORT 
** constraint handling.
** </dl>
*/
#define SQLITE_VTAB_CONSTRAINT_SUPPORT 1

/*
** CAPI3REF: Determine The Virtual Table Conflict Policy
**
** This function may only be called from within a call to the [xUpdate] method
** of a [virtual table] implementation for an INSERT or UPDATE operation. ^The
** value returned is one of [SQLITE_ROLLBACK], [SQLITE_IGNORE], [SQLITE_FAIL],
** [SQLITE_ABORT], or [SQLITE_REPLACE], according to the [ON CONFLICT] mode
** of the SQL statement that triggered the call to the [xUpdate] method of the
** [virtual table].
*/
SQLITE_API int SQLITE_STDCALL sqlite3_vtab_on_conflict(sqlite3 *);

/*
** CAPI3REF: Conflict resolution modes
** KEYWORDS: {conflict resolution mode}
**
** These constants are returned by [sqlite3_vtab_on_conflict()] to
** inform a [virtual table] implementation what the [ON CONFLICT] mode
** is for the SQL statement being evaluated.
**
** Note that the [SQLITE_IGNORE] constant is also used as a potential
** return value from the [sqlite3_set_authorizer()] callback and that
** [SQLITE_ABORT] is also a [result code].
*/
#define SQLITE_ROLLBACK 1
/* #define SQLITE_IGNORE 2 // Also used by sqlite3_authorizer() callback */
#define SQLITE_FAIL     3
/* #define SQLITE_ABORT 4  // Also an error code */
#define SQLITE_REPLACE  5

/*
** CAPI3REF: Prepared Statement Scan Status Opcodes
** KEYWORDS: {scanstatus options}
**
** The following constants can be used for the T parameter to the
** [sqlite3_stmt_scanstatus(S,X,T,V)] interface. Each constant designates a
** different metric for sqlite3_stmt_scanstatus() to return.
**
** When the value returned to V is a string, space to hold that string is
** managed by the prepared statement S and will be automatically freed when
** S is finalized.
**
** <dl>
** [[SQLITE_SCANSTAT_NLOOP]] <dt>SQLITE_SCANSTAT_NLOOP</dt>
** <dd>^The [sqlite3_int64] variable pointed to by the T parameter will be
** set to the total number of times that the X-th loop has run.</dd>
**
** [[SQLITE_SCANSTAT_NVISIT]] <dt>SQLITE_SCANSTAT_NVISIT</dt>
** <dd>^The [sqlite3_int64] variable pointed to by the T parameter will be set
** to the total number of rows examined by all iterations of the X-th loop.</dd>
**
** [[SQLITE_SCANSTAT_EST]] <dt>SQLITE_SCANSTAT_EST</dt>
** <dd>^The "double" variable pointed to by the T parameter will be set to the
** query planner's estimate for the average number of rows output from each
** iteration of the X-th loop. If the query planner's estimates was accurate,
** then this value will approximate the quotient NVISIT/NLOOP and the
** product of this value for all prior loops with the same SELECTID will
** be the NLOOP value for the current loop.
**
** [[SQLITE_SCANSTAT_NAME]] <dt>SQLITE_SCANSTAT_NAME</dt>
** <dd>^The "const char *" variable pointed to by the T parameter will be set
** to a zero-terminated UTF-8 string containing the name of the index or table
** used for the X-th loop.
**
** [[SQLITE_SCANSTAT_EXPLAIN]] <dt>SQLITE_SCANSTAT_EXPLAIN</dt>
** <dd>^The "const char *" variable pointed to by the T parameter will be set
** to a zero-terminated UTF-8 string containing the [EXPLAIN QUERY PLAN]
** description for the X-th loop.
**
** [[SQLITE_SCANSTAT_SELECTID]] <dt>SQLITE_SCANSTAT_SELECT</dt>
** <dd>^The "int" variable pointed to by the T parameter will be set to the
** "select-id" for the X-th loop. The select-id identifies which query or
** subquery the loop is part of. The main query has a select-id of zero.
** The select-id is the same value as is output in the first column
** of an [EXPLAIN QUERY PLAN] query.
** </dl>
*/
#define SQLITE_SCANSTAT_NLOOP 0
#define SQLITE_SCANSTAT_NVISIT 1
#define SQLITE_SCANSTAT_EST 2
#define SQLITE_SCANSTAT_NAME 3
#define SQLITE_SCANSTAT_EXPLAIN 4
#define SQLITE_SCANSTAT_SELECTID 5

/*
** CAPI3REF: Prepared Statement Scan Status
** METHOD: sqlite3_stmt
**
** This interface returns information about the predicted and measured
** performance for pStmt.  Advanced applications can use this
** interface to compare the predicted and the measured performance and
** issue warnings and/or rerun [ANALYZE] if discrepancies are found.
**
** Since this interface is expected to be rarely used, it is only
** available if SQLite is compiled using the [SQLITE_ENABLE_STMT_SCANSTATUS]
** compile-time option.
**
** The "iScanStatusOp" parameter determines which status information to return.
** The "iScanStatusOp" must be one of the [scanstatus options] or the behavior
** of this interface is undefined.
** ^The requested measurement is written into a variable pointed to by
** the "pOut" parameter.
** Parameter "idx" identifies the specific loop to retrieve statistics for.
** Loops are numbered starting from zero. ^If idx is out of range - less than
** zero or greater than or equal to the total number of loops used to implement
** the statement - a non-zero value is returned and the variable that pOut
** points to is unchanged.
**
** ^Statistics might not be available for all loops in all statements. ^In cases
** where there exist loops with no available statistics, this function behaves
** as if the loop did not exist - it returns non-zero and leave the variable
** that pOut points to unchanged.
**
** See also: [sqlite3_stmt_scanstatus_reset()]
*/
SQLITE_API SQLITE_EXPERIMENTAL int SQLITE_STDCALL sqlite3_stmt_scanstatus(
  sqlite3_stmt *pStmt,      /* Prepared statement for which info desired */
  int idx,                  /* Index of loop to report on */
  int iScanStatusOp,        /* Information desired.  SQLITE_SCANSTAT_* */
  void *pOut                /* Result written here */
);

/*
** CAPI3REF: Zero Scan-Status Counters
** METHOD: sqlite3_stmt
**
** ^Zero all [sqlite3_stmt_scanstatus()] related event counters.
**
** This API is only available if the library is built with pre-processor
** symbol [SQLITE_ENABLE_STMT_SCANSTATUS] defined.
*/
SQLITE_API SQLITE_EXPERIMENTAL void SQLITE_STDCALL sqlite3_stmt_scanstatus_reset(sqlite3_stmt*);

/*
** Undo the hack that converts floating point types to integer for
** builds on processors without floating point support.
*/
#ifdef SQLITE_OMIT_FLOATING_POINT
# undef double
#endif

#ifdef __cplusplus
}  /* End of the 'extern "C"' block */
#endif
#endif /* _SQLITE3_H_ */

/*
** 2010 August 30
**
** The author disclaims copyright to this source code.  In place of
** a legal notice, here is a blessing:
**
**    May you do good and not evil.
**    May you find forgiveness for yourself and forgive others.
**    May you share freely, never taking more than you give.
**
*************************************************************************
*/

#ifndef _SQLITE3RTREE_H_
#define _SQLITE3RTREE_H_

#ifdef __cplusplus
extern "C" {
#endif

typedef struct sqlite3_rtree_geometry sqlite3_rtree_geometry;
typedef struct sqlite3_rtree_query_info sqlite3_rtree_query_info;

/* The double-precision datatype used by RTree depends on the
** SQLITE_RTREE_INT_ONLY compile-time option.
*/
#ifdef SQLITE_RTREE_INT_ONLY
  typedef sqlite3_int64 sqlite3_rtree_dbl;
#else
  typedef double sqlite3_rtree_dbl;
#endif

/*
** Register a geometry callback named zGeom that can be used as part of an
** R-Tree geometry query as follows:
**
** SELECT ... FROM <rtree> WHERE <rtree col> MATCH $zGeom(... params ...)
*/
SQLITE_API int SQLITE_STDCALL sqlite3_rtree_geometry_callback(
 sqlite3 *db,
 const char *zGeom,
 int (*xGeom)(sqlite3_rtree_geometry*, int, sqlite3_rtree_dbl*,int*),
 void *pContext
);

/*
** A pointer to a structure of the following type is passed as the first
** argument to callbacks registered using rtree_geometry_callback().
*/
struct sqlite3_rtree_geometry {
  void *pContext;                 /* Copy of pContext passed to s_r_g_c() */
  int nParam;                     /* Size of array aParam[] */
  sqlite3_rtree_dbl *aParam;      /* Parameters passed to SQL geom function */
  void *pUser;                    /* Callback implementation user data */
  void (*xDelUser)(void *);       /* Called by SQLite to clean up pUser */
};

/*
** Register a 2nd-generation geometry callback named zScore that can be 
** used as part of an R-Tree geometry query as follows:
**
** SELECT ... FROM <rtree> WHERE <rtree col> MATCH $zQueryFunc(... params ...)
*/
SQLITE_API int SQLITE_STDCALL sqlite3_rtree_query_callback(
 sqlite3 *db,
 const char *zQueryFunc,
 int (*xQueryFunc)(sqlite3_rtree_query_info*),
 void *pContext,
 void (*xDestructor)(void*)
);

/*
** A pointer to a structure of the following type is passed as the 
** argument to scored geometry callback registered using
** sqlite3_rtree_query_callback().
**
** Note that the first 5 fields of this structure are identical to
** sqlite3_rtree_geometry.  This structure is a subclass of
** sqlite3_rtree_geometry.
*/
struct sqlite3_rtree_query_info {
  void *pContext;                   /* pContext from when function registered */
  int nParam;                       /* Number of function parameters */
  sqlite3_rtree_dbl *aParam;        /* value of function parameters */
  void *pUser;                      /* callback can use this, if desired */
  void (*xDelUser)(void*);          /* function to free pUser */
  sqlite3_rtree_dbl *aCoord;        /* Coordinates of node or entry to check */
  unsigned int *anQueue;            /* Number of pending entries in the queue */
  int nCoord;                       /* Number of coordinates */
  int iLevel;                       /* Level of current node or entry */
  int mxLevel;                      /* The largest iLevel value in the tree */
  sqlite3_int64 iRowid;             /* Rowid for current entry */
  sqlite3_rtree_dbl rParentScore;   /* Score of parent node */
  int eParentWithin;                /* Visibility of parent node */
  int eWithin;                      /* OUT: Visiblity */
  sqlite3_rtree_dbl rScore;         /* OUT: Write the score here */
};

/*
** Allowed values for sqlite3_rtree_query.eWithin and .eParentWithin.
*/
#define NOT_WITHIN       0   /* Object completely outside of query region */
#define PARTLY_WITHIN    1   /* Object partially overlaps query region */
#define FULLY_WITHIN     2   /* Object fully contained within query region */

#ifdef __cplusplus
}  /* end of the 'extern "C"' block */
#endif

#endif  /* ifndef _SQLITE3RTREE_H_ */

Back to File Manager